From: Mike Frysinger <vapier@gentoo.org>
To: linux-kernel@vger.kernel.org
Cc: uclinux-dist-devel@blackfin.uclinux.org
Subject: [PATCH 05/25] Blackfin: redo handling of bad irqs
Date: Sat, 20 Jun 2009 14:44:28 -0400 [thread overview]
Message-ID: <1245523488-26536-6-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1245523488-26536-1-git-send-email-vapier@gentoo.org>
With the common IRQ code initializing much more of the irq_desc state, we
can't blindly initialize it ourselves to the local bad_irq state. If we
do, we end up wrongly clobbering many fields. So punt most of the bad irq
code as the common layers will handle the default state, and simply call
handle_bad_irq() directly when the IRQ we are processing is invalid.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/kernel/irqchip.c | 53 ++++++++-------------------------------
1 files changed, 11 insertions(+), 42 deletions(-)
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 6e31e93..36bba30 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -38,38 +38,15 @@
#include <asm/pda.h>
static atomic_t irq_err_count;
-static spinlock_t irq_controller_lock;
-
-/*
- * Dummy mask/unmask handler
- */
-void dummy_mask_unmask_irq(unsigned int irq)
-{
-}
-
void ack_bad_irq(unsigned int irq)
{
atomic_inc(&irq_err_count);
printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
}
-static struct irq_chip bad_chip = {
- .ack = dummy_mask_unmask_irq,
- .mask = dummy_mask_unmask_irq,
- .unmask = dummy_mask_unmask_irq,
-};
-
-static int bad_stats;
static struct irq_desc bad_irq_desc = {
- .status = IRQ_DISABLED,
- .chip = &bad_chip,
.handle_irq = handle_bad_irq,
- .depth = 1,
.lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
- .kstat_irqs = &bad_stats,
-#ifdef CONFIG_SMP
- .affinity = CPU_MASK_ALL
-#endif
};
#ifdef CONFIG_CPUMASK_OFFSTACK
@@ -119,21 +96,13 @@ __attribute__((l1_text))
#endif
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
- struct pt_regs *old_regs;
- struct irq_desc *desc = irq_desc + irq;
#ifndef CONFIG_IPIPE
unsigned short pending, other_ints;
#endif
- old_regs = set_irq_regs(regs);
-
- /*
- * Some hardware gives randomly wrong interrupts. Rather
- * than crashing, do something sensible.
- */
- if (irq >= NR_IRQS)
- desc = &bad_irq_desc;
+ struct pt_regs *old_regs = set_irq_regs(regs);
irq_enter();
+
#ifdef CONFIG_DEBUG_STACKOVERFLOW
/* Debugging check for stack overflow: is there less than STACK_WARN free? */
{
@@ -149,7 +118,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
}
}
#endif
- generic_handle_irq(irq);
+
+ /*
+ * Some hardware gives randomly wrong interrupts. Rather
+ * than crashing, do something sensible.
+ */
+ if (irq >= NR_IRQS)
+ handle_bad_irq(irq, &bad_irq_desc);
+ else
+ generic_handle_irq(irq);
#ifndef CONFIG_IPIPE
/*
@@ -173,14 +150,6 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
void __init init_IRQ(void)
{
- struct irq_desc *desc;
- int irq;
-
- spin_lock_init(&irq_controller_lock);
- for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
- *desc = bad_irq_desc;
- }
-
init_arch_irq();
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
--
1.6.3.1
next prev parent reply other threads:[~2009-06-20 18:46 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-20 18:44 [PATCH 00/25] Blackfin arch updates for 2.6.31 (part 3) Mike Frysinger
2009-06-20 18:44 ` [PATCH 01/25] Blackfin: unify memory region checks between kgdb and traps Mike Frysinger
2009-06-20 18:44 ` [PATCH 02/25] Blackfin: bf518f-ezbrd: update DSA resources Mike Frysinger
2009-06-20 18:44 ` [PATCH 03/25] Blackfin: bf533-ezkit: add resources for FISP devices Mike Frysinger
2009-06-20 18:44 ` [PATCH 04/25] Blackfin: update anomaly lists Mike Frysinger
2009-06-20 18:44 ` Mike Frysinger [this message]
2009-06-20 18:44 ` [PATCH 06/25] Blackfin: only build show_interrupts() when procfs is enabled Mike Frysinger
2009-06-20 18:44 ` [PATCH 07/25] Blackfin: simplify irq stack overflow checking Mike Frysinger
2009-06-20 18:44 ` [PATCH 08/25] Blackfin: abstract irq14 lowering in do_irq Mike Frysinger
2009-06-20 18:44 ` [PATCH 09/25] Blackfin: fix accidental reset in some boot modes Mike Frysinger
2009-06-20 18:44 ` [PATCH 10/25] Blackfin: bf526-ezbrd: set SPI flash resources to SST device Mike Frysinger
2009-06-20 18:44 ` [PATCH 11/25] Blackfin: allow people to select BF51x-0.1 silicon rev Mike Frysinger
2009-06-20 18:44 ` [PATCH 12/25] Blackfin: convert interrupt pipeline to irqflags Mike Frysinger
2009-06-20 18:44 ` [PATCH 13/25] Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline Mike Frysinger
2009-06-20 18:44 ` [PATCH 14/25] Blackfin: remove obsolete mcount support from I-pipe code Mike Frysinger
2009-06-20 18:44 ` [PATCH 15/25] Blackfin: update I-pipe patch level Mike Frysinger
2009-06-20 18:44 ` [PATCH 16/25] Blackfin: decouple unrelated cache settings to get exact behavior Mike Frysinger
2009-06-20 18:44 ` [PATCH 17/25] Blackfin: update defconfigs Mike Frysinger
2009-06-20 18:44 ` [PATCH 18/25] Blackfin: stick the CPU name into boot image name Mike Frysinger
2009-06-20 18:44 ` [PATCH 19/25] Blackfin: unify memory map headers Mike Frysinger
2009-06-20 18:44 ` [PATCH 20/25] Blackfin: fix typo in TRAS define in mem_init.h header Mike Frysinger
2009-06-20 18:44 ` [PATCH 21/25] Blackfin: bf526-ezbrd: handle different SDRAM chips Mike Frysinger
2009-06-20 18:44 ` [PATCH 22/25] Blackfin: drop unused ISP1760 port1_disable from board resources Mike Frysinger
2009-06-20 18:44 ` [PATCH 23/25] Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS Mike Frysinger
2009-06-20 18:44 ` [PATCH 24/25] Blackfin: fix early crash when booting on wrong cpu Mike Frysinger
2009-06-20 18:44 ` [PATCH 25/25] Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction) Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1245523488-26536-6-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®