From: Mike Frysinger <vapier@gentoo.org>
To: linux-kernel@vger.kernel.org
Cc: uclinux-dist-devel@blackfin.uclinux.org,
Graf Yang <graf.yang@analog.com>
Subject: [PATCH 21/25] Blackfin: bf526-ezbrd: handle different SDRAM chips
Date: Sat, 20 Jun 2009 14:44:44 -0400 [thread overview]
Message-ID: <1245523488-26536-22-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1245523488-26536-1-git-send-email-vapier@gentoo.org>
From: Graf Yang <graf.yang@analog.com>
The BF526-EZBRD changed SDRAM chips between board revisions, so create a
timing table that can accommodate both.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/Kconfig | 7 ++-
arch/blackfin/include/asm/mem_init.h | 86 ++++++++++++++++++++++++++++++++++
2 files changed, 92 insertions(+), 1 deletions(-)
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 220635a..384f7cd 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -358,7 +358,7 @@ config MEM_MT48LC8M32B2B5_7
config MEM_MT48LC32M16A2TG_75
bool
- depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
+ depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
default y
config MEM_MT48LC32M8A2_75
@@ -366,6 +366,11 @@ config MEM_MT48LC32M8A2_75
depends on (BFIN518F_EZBRD)
default y
+config MEM_MT48H32M16LFCJ_75
+ bool
+ depends on (BFIN526_EZBRD)
+ default y
+
source "arch/blackfin/mach-bf518/Kconfig"
source "arch/blackfin/mach-bf527/Kconfig"
source "arch/blackfin/mach-bf533/Kconfig"
diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h
index fc164b3..4179e32 100644
--- a/arch/blackfin/include/asm/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -89,6 +89,85 @@
#endif
#endif
+/*
+ * The BF526-EZ-Board changed SDRAM chips between revisions,
+ * so we use below timings to accommodate both.
+ */
+#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_8
+#define SDRAM_tRAS_num 8
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_7
+#define SDRAM_tRAS_num 7
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_6
+#define SDRAM_tRAS_num 6
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_5
+#define SDRAM_tRAS_num 5
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 4
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 4
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_2
+#define SDRAM_tRAS_num 2
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#endif
+
#if defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
defined(CONFIG_MEM_MT48LC8M32B2B5_7)
/*SDRAM INFORMATION: */
@@ -109,6 +188,13 @@
#define SDRAM_CL CL_3
#endif
+#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_2
+#endif
+
#ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC
/* Equation from section 17 (p17-46) of BF533 HRM */
--
1.6.3.1
next prev parent reply other threads:[~2009-06-20 18:50 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-20 18:44 [PATCH 00/25] Blackfin arch updates for 2.6.31 (part 3) Mike Frysinger
2009-06-20 18:44 ` [PATCH 01/25] Blackfin: unify memory region checks between kgdb and traps Mike Frysinger
2009-06-20 18:44 ` [PATCH 02/25] Blackfin: bf518f-ezbrd: update DSA resources Mike Frysinger
2009-06-20 18:44 ` [PATCH 03/25] Blackfin: bf533-ezkit: add resources for FISP devices Mike Frysinger
2009-06-20 18:44 ` [PATCH 04/25] Blackfin: update anomaly lists Mike Frysinger
2009-06-20 18:44 ` [PATCH 05/25] Blackfin: redo handling of bad irqs Mike Frysinger
2009-06-20 18:44 ` [PATCH 06/25] Blackfin: only build show_interrupts() when procfs is enabled Mike Frysinger
2009-06-20 18:44 ` [PATCH 07/25] Blackfin: simplify irq stack overflow checking Mike Frysinger
2009-06-20 18:44 ` [PATCH 08/25] Blackfin: abstract irq14 lowering in do_irq Mike Frysinger
2009-06-20 18:44 ` [PATCH 09/25] Blackfin: fix accidental reset in some boot modes Mike Frysinger
2009-06-20 18:44 ` [PATCH 10/25] Blackfin: bf526-ezbrd: set SPI flash resources to SST device Mike Frysinger
2009-06-20 18:44 ` [PATCH 11/25] Blackfin: allow people to select BF51x-0.1 silicon rev Mike Frysinger
2009-06-20 18:44 ` [PATCH 12/25] Blackfin: convert interrupt pipeline to irqflags Mike Frysinger
2009-06-20 18:44 ` [PATCH 13/25] Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline Mike Frysinger
2009-06-20 18:44 ` [PATCH 14/25] Blackfin: remove obsolete mcount support from I-pipe code Mike Frysinger
2009-06-20 18:44 ` [PATCH 15/25] Blackfin: update I-pipe patch level Mike Frysinger
2009-06-20 18:44 ` [PATCH 16/25] Blackfin: decouple unrelated cache settings to get exact behavior Mike Frysinger
2009-06-20 18:44 ` [PATCH 17/25] Blackfin: update defconfigs Mike Frysinger
2009-06-20 18:44 ` [PATCH 18/25] Blackfin: stick the CPU name into boot image name Mike Frysinger
2009-06-20 18:44 ` [PATCH 19/25] Blackfin: unify memory map headers Mike Frysinger
2009-06-20 18:44 ` [PATCH 20/25] Blackfin: fix typo in TRAS define in mem_init.h header Mike Frysinger
2009-06-20 18:44 ` Mike Frysinger [this message]
2009-06-20 18:44 ` [PATCH 22/25] Blackfin: drop unused ISP1760 port1_disable from board resources Mike Frysinger
2009-06-20 18:44 ` [PATCH 23/25] Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS Mike Frysinger
2009-06-20 18:44 ` [PATCH 24/25] Blackfin: fix early crash when booting on wrong cpu Mike Frysinger
2009-06-20 18:44 ` [PATCH 25/25] Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction) Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1245523488-26536-22-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=graf.yang@analog.com \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®