mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
	Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 07/22] mfd: Export ISEL values from WM831x core
Date: Mon, 27 Jul 2009 14:45:57 +0100	[thread overview]
Message-ID: <1248702372-29534-7-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20090727134527.GA12849@rakim.wolfsonmicro.main>

The current settings which can be used with the WM831x current sinks
can't easily be mapped between register values and currents at run
time without a lookup table since the values scale logarithmically
to match the way the human eye interprets brightness. This lookup
table is inclided in the core since several drivers need to use it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/mfd/wm831x-core.c            |   64 ++++++++++++++++++++++++++++++++++
 include/linux/mfd/wm831x/regulator.h |   21 +++++++++++
 2 files changed, 85 insertions(+), 0 deletions(-)
 create mode 100644 include/linux/mfd/wm831x/regulator.h

diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 33eaea2..49b7885 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -24,6 +24,70 @@
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/auxadc.h>
 #include <linux/mfd/wm831x/otp.h>
+#include <linux/mfd/wm831x/regulator.h>
+
+/* Current settings - values are 2*2^(reg_val/4) microamps.  These are
+ * exported since they are used by multiple drivers.
+ */
+int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL] = {
+	2,
+	2,
+	3,
+	3,
+	4,
+	5,
+	6,
+	7,
+	8,
+	10,
+	11,
+	13,
+	16,
+	19,
+	23,
+	27,
+	32,
+	38,
+	45,
+	54,
+	64,
+	76,
+	91,
+	108,
+	128,
+	152,
+	181,
+	215,
+	256,
+	304,
+	362,
+	431,
+	512,
+	609,
+	724,
+	861,
+	1024,
+	1218,
+	1448,
+	1722,
+	2048,
+	2435,
+	2896,
+	3444,
+	4096,
+	4871,
+	5793,
+	6889,
+	8192,
+	9742,
+	11585,
+	13777,
+	16384,
+	19484,
+	23170,
+	27554,
+};
+EXPORT_SYMBOL_GPL(wm831x_isinkv_values);
 
 enum wm831x_parent {
 	WM8310 = 0,
diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h
new file mode 100644
index 0000000..b5d58fb
--- /dev/null
+++ b/include/linux/mfd/wm831x/regulator.h
@@ -0,0 +1,21 @@
+/*
+ * linux/mfd/wm831x/regulator.h -- Regulator definitons for wm831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_REGULATOR_H__
+#define __MFD_WM831X_REGULATOR_H__
+
+#define WM831X_ISINK_MAX_ISEL 56
+extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL];
+
+#endif
-- 
1.6.3.3


  parent reply	other threads:[~2009-07-27 13:46 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
2009-07-27 13:45 ` [PATCH 01/22] mfd: Allow multiple MFD cells with the same name Mark Brown
2009-07-27 13:45 ` [PATCH 02/22] mfd: Initial core support for WM831x series devices Mark Brown
2009-07-27 15:00   ` [PATCH] mfd: Fix comment cut'n'paste in register lock code Mark Brown
2009-07-27 13:45 ` [PATCH 03/22] mfd: Add WM831x interrupt support Mark Brown
2009-07-27 13:45 ` [PATCH 04/22] mfd: Add WM831x AUXADC support Mark Brown
2009-07-27 13:45 ` [PATCH 05/22] mfd: Conditionally add WM831x backlight subdevice Mark Brown
2009-07-27 13:45 ` [PATCH 06/22] mfd: Add basic WM831x OTP support Mark Brown
2009-07-27 13:45 ` Mark Brown [this message]
2009-07-27 13:45 ` [PATCH 08/22] mfd: Hook WM831x into build system Mark Brown
2009-07-27 13:45 ` [PATCH 09/22] backlight: Add WM831x backlight driver Mark Brown
2009-07-27 13:46 ` [PATCH 10/22] gpio: Add WM831X GPIO driver Mark Brown
2009-07-27 20:27   ` David Brownell
2009-07-27 13:46 ` [PATCH 11/22] hwmon: Add WM835x PMIC hardware monitoring driver Mark Brown
2009-07-27 13:46 ` [PATCH 12/22] hwmon: WM831x " Mark Brown
2009-07-27 19:44   ` [lm-sensors] " Jean Delvare
2009-07-27 20:46     ` Mark Brown
2009-07-28  7:26       ` Jean Delvare
2009-07-28 14:11   ` [PATCH] " Mark Brown
2009-07-28 14:26     ` Jean Delvare
2009-07-28 14:50       ` Mark Brown
2009-07-28 14:52         ` Mark Brown
2009-08-04 11:33         ` Samuel Ortiz
2009-08-04 11:53           ` Jean Delvare
2009-07-27 13:46 ` [PATCH 13/22] Input: Add support for the WM831x ON pin Mark Brown
2009-07-27 15:38   ` Dmitry Torokhov
2009-07-27 15:41     ` Mark Brown
2009-07-28 14:13   ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 14/22] leds: Add WM831x status LED driver Mark Brown
2009-07-27 13:46 ` [PATCH 15/22] power_supply: Add driver for the PMU on WM831x PMICs Mark Brown
2009-07-27 13:46 ` [PATCH 16/22] regulator: Add WM831x DC-DC buck convertor support Mark Brown
2009-07-28 14:21   ` [PATCH 17/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 17/22] regulator: Add WM831x LDO support Mark Brown
2009-07-28 14:22   ` [PATCH 18/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 18/22] regulator: Add WM831x EPE support Mark Brown
2009-07-28 14:22   ` [PATCH 19/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 19/22] regulator: Add WM831x DC-DC boost convertor support Mark Brown
2009-07-28 14:23   ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 20/22] regulator: Add WM831x ISINK support Mark Brown
2009-07-28 14:23   ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 21/22] RTC: Add support for RTCs on Wolfson WM831x devices Mark Brown
2009-07-28 14:18   ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 22/22] [WATCHDOG] Add support for WM831x watchdog Mark Brown
2009-08-04 11:35 ` [PATCH 0/22] WM831x drivers Samuel Ortiz
2009-08-04 11:44   ` Liam Girdwood
2009-08-04 14:07     ` Samuel Ortiz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1248702372-29534-7-git-send-email-broonie@opensource.wolfsonmicro.com \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome