From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH] mfd: Fix comment cut'n'paste in register lock code
Date: Mon, 27 Jul 2009 16:00:37 +0100 [thread overview]
Message-ID: <1248706837-9656-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1248702372-29534-2-git-send-email-broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm831x-core.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 49b7885..05e5724 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -115,11 +115,11 @@ static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
}
/**
- * wm831x_reg_unlock: Unlock user keyed registers
+ * wm831x_reg_lock: Unlock user keyed registers
*
* The WM831x has a user key preventing writes to particularly
* critical registers. This function locks those registers,
- * allowing writes to them.
+ * disallowing writes to them.
*/
void wm831x_reg_lock(struct wm831x *wm831x)
{
@@ -145,7 +145,7 @@ EXPORT_SYMBOL_GPL(wm831x_reg_lock);
*
* The WM831x has a user key preventing writes to particularly
* critical registers. This function locks those registers,
- * preventing spurious writes.
+ * allowing writes to them.
*/
int wm831x_reg_unlock(struct wm831x *wm831x)
{
--
1.6.3.3
next prev parent reply other threads:[~2009-07-27 15:00 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
2009-07-27 13:45 ` [PATCH 01/22] mfd: Allow multiple MFD cells with the same name Mark Brown
2009-07-27 13:45 ` [PATCH 02/22] mfd: Initial core support for WM831x series devices Mark Brown
2009-07-27 15:00 ` Mark Brown [this message]
2009-07-27 13:45 ` [PATCH 03/22] mfd: Add WM831x interrupt support Mark Brown
2009-07-27 13:45 ` [PATCH 04/22] mfd: Add WM831x AUXADC support Mark Brown
2009-07-27 13:45 ` [PATCH 05/22] mfd: Conditionally add WM831x backlight subdevice Mark Brown
2009-07-27 13:45 ` [PATCH 06/22] mfd: Add basic WM831x OTP support Mark Brown
2009-07-27 13:45 ` [PATCH 07/22] mfd: Export ISEL values from WM831x core Mark Brown
2009-07-27 13:45 ` [PATCH 08/22] mfd: Hook WM831x into build system Mark Brown
2009-07-27 13:45 ` [PATCH 09/22] backlight: Add WM831x backlight driver Mark Brown
2009-07-27 13:46 ` [PATCH 10/22] gpio: Add WM831X GPIO driver Mark Brown
2009-07-27 20:27 ` David Brownell
2009-07-27 13:46 ` [PATCH 11/22] hwmon: Add WM835x PMIC hardware monitoring driver Mark Brown
2009-07-27 13:46 ` [PATCH 12/22] hwmon: WM831x " Mark Brown
2009-07-27 19:44 ` [lm-sensors] " Jean Delvare
2009-07-27 20:46 ` Mark Brown
2009-07-28 7:26 ` Jean Delvare
2009-07-28 14:11 ` [PATCH] " Mark Brown
2009-07-28 14:26 ` Jean Delvare
2009-07-28 14:50 ` Mark Brown
2009-07-28 14:52 ` Mark Brown
2009-08-04 11:33 ` Samuel Ortiz
2009-08-04 11:53 ` Jean Delvare
2009-07-27 13:46 ` [PATCH 13/22] Input: Add support for the WM831x ON pin Mark Brown
2009-07-27 15:38 ` Dmitry Torokhov
2009-07-27 15:41 ` Mark Brown
2009-07-28 14:13 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 14/22] leds: Add WM831x status LED driver Mark Brown
2009-07-27 13:46 ` [PATCH 15/22] power_supply: Add driver for the PMU on WM831x PMICs Mark Brown
2009-07-27 13:46 ` [PATCH 16/22] regulator: Add WM831x DC-DC buck convertor support Mark Brown
2009-07-28 14:21 ` [PATCH 17/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 17/22] regulator: Add WM831x LDO support Mark Brown
2009-07-28 14:22 ` [PATCH 18/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 18/22] regulator: Add WM831x EPE support Mark Brown
2009-07-28 14:22 ` [PATCH 19/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 19/22] regulator: Add WM831x DC-DC boost convertor support Mark Brown
2009-07-28 14:23 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 20/22] regulator: Add WM831x ISINK support Mark Brown
2009-07-28 14:23 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 21/22] RTC: Add support for RTCs on Wolfson WM831x devices Mark Brown
2009-07-28 14:18 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 22/22] [WATCHDOG] Add support for WM831x watchdog Mark Brown
2009-08-04 11:35 ` [PATCH 0/22] WM831x drivers Samuel Ortiz
2009-08-04 11:44 ` Liam Girdwood
2009-08-04 14:07 ` Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1248706837-9656-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome