From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 08/22] mfd: Hook WM831x into build system
Date: Mon, 27 Jul 2009 14:45:58 +0100 [thread overview]
Message-ID: <1248702372-29534-8-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20090727134527.GA12849@rakim.wolfsonmicro.main>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/Kconfig | 10 ++++++++++
drivers/mfd/Makefile | 2 ++
2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 491ac0f..0273456 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -157,6 +157,16 @@ config MFD_WM8400
the device, additional drivers must be enabled in order to use
the functionality of the device.
+config MFD_WM831X
+ tristate "Support Wolfson Microelectronics WM831x PMICs"
+ select MFD_CORE
+ depends on I2C
+ help
+ Support for the Wolfson Microelecronics WM831x PMICs. This
+ driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
config MFD_WM8350
tristate
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 6f8a9a1..285cb32 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -15,6 +15,8 @@ obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o
obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o
obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
+wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o
+obj-$(CONFIG_MFD_WM831X) += wm831x.o
wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o
obj-$(CONFIG_MFD_WM8350) += wm8350.o
obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
--
1.6.3.3
next prev parent reply other threads:[~2009-07-27 13:49 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
2009-07-27 13:45 ` [PATCH 01/22] mfd: Allow multiple MFD cells with the same name Mark Brown
2009-07-27 13:45 ` [PATCH 02/22] mfd: Initial core support for WM831x series devices Mark Brown
2009-07-27 15:00 ` [PATCH] mfd: Fix comment cut'n'paste in register lock code Mark Brown
2009-07-27 13:45 ` [PATCH 03/22] mfd: Add WM831x interrupt support Mark Brown
2009-07-27 13:45 ` [PATCH 04/22] mfd: Add WM831x AUXADC support Mark Brown
2009-07-27 13:45 ` [PATCH 05/22] mfd: Conditionally add WM831x backlight subdevice Mark Brown
2009-07-27 13:45 ` [PATCH 06/22] mfd: Add basic WM831x OTP support Mark Brown
2009-07-27 13:45 ` [PATCH 07/22] mfd: Export ISEL values from WM831x core Mark Brown
2009-07-27 13:45 ` Mark Brown [this message]
2009-07-27 13:45 ` [PATCH 09/22] backlight: Add WM831x backlight driver Mark Brown
2009-07-27 13:46 ` [PATCH 10/22] gpio: Add WM831X GPIO driver Mark Brown
2009-07-27 20:27 ` David Brownell
2009-07-27 13:46 ` [PATCH 11/22] hwmon: Add WM835x PMIC hardware monitoring driver Mark Brown
2009-07-27 13:46 ` [PATCH 12/22] hwmon: WM831x " Mark Brown
2009-07-27 19:44 ` [lm-sensors] " Jean Delvare
2009-07-27 20:46 ` Mark Brown
2009-07-28 7:26 ` Jean Delvare
2009-07-28 14:11 ` [PATCH] " Mark Brown
2009-07-28 14:26 ` Jean Delvare
2009-07-28 14:50 ` Mark Brown
2009-07-28 14:52 ` Mark Brown
2009-08-04 11:33 ` Samuel Ortiz
2009-08-04 11:53 ` Jean Delvare
2009-07-27 13:46 ` [PATCH 13/22] Input: Add support for the WM831x ON pin Mark Brown
2009-07-27 15:38 ` Dmitry Torokhov
2009-07-27 15:41 ` Mark Brown
2009-07-28 14:13 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 14/22] leds: Add WM831x status LED driver Mark Brown
2009-07-27 13:46 ` [PATCH 15/22] power_supply: Add driver for the PMU on WM831x PMICs Mark Brown
2009-07-27 13:46 ` [PATCH 16/22] regulator: Add WM831x DC-DC buck convertor support Mark Brown
2009-07-28 14:21 ` [PATCH 17/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 17/22] regulator: Add WM831x LDO support Mark Brown
2009-07-28 14:22 ` [PATCH 18/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 18/22] regulator: Add WM831x EPE support Mark Brown
2009-07-28 14:22 ` [PATCH 19/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 19/22] regulator: Add WM831x DC-DC boost convertor support Mark Brown
2009-07-28 14:23 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 20/22] regulator: Add WM831x ISINK support Mark Brown
2009-07-28 14:23 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 21/22] RTC: Add support for RTCs on Wolfson WM831x devices Mark Brown
2009-07-28 14:18 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 22/22] [WATCHDOG] Add support for WM831x watchdog Mark Brown
2009-08-04 11:35 ` [PATCH 0/22] WM831x drivers Samuel Ortiz
2009-08-04 11:44 ` Liam Girdwood
2009-08-04 14:07 ` Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1248702372-29534-8-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome