From: Mike Frysinger <vapier@gentoo.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Subject: Pull request blackfin.git (for-linus branch)
Date: Tue, 15 Dec 2009 12:36:50 -0500 [thread overview]
Message-ID: <1260898610-25713-1-git-send-email-vapier@gentoo.org> (raw)
The following changes since commit 3ea6b3d0e6d0ffd91c0f8cadeb69b7133c038b32:
Linus Torvalds (1):
Merge branch 'for_linus' of git://git.kernel.org/.../jack/linux-udf-2.6
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin.git for-linus
Alexey Dobriyan (1):
Blackfin: convert kgdbtest to proc_fops
Barry Song (10):
Blackfin: add some bounds checking to peripheral_request
Blackfin: bf537-stamp: need io.h for writeb() funcs
Blackfin: support smaller uncached DMA chunks for memory constrained systems
Blackfin: drop 4KB reserve at end of memory
Blackfin: MPU: support XIP in async flash memory
Blackfin: workaround anomaly 05000310
Blackfin: dma-mapping.h: flesh out missing DMA mapping functions
Blackfin: convert to asm-generic pci headers
Blackfin: bf537-stamp: add CAN resources
Blackfin: add support for TIF_NOTIFY_RESUME
Bernd Schmidt (1):
Blackfin: improve async bank access checking (for cross-banks & XIP)
Cliff Cai (2):
Blackfin: bf537-stamp: add adau1371 i2c address
Blackfin: bf537-stamp: add adau1761 i2c address
David Daney (1):
Blackfin: Convert BUG() to use unreachable()
Graf Yang (1):
Blackfin: add C define of trace_buffer_init()
Michael Hennerich (13):
Blackfin: clean up bf537-lq035 board resources
Blackfin: convert DMA code to a proper bitmap
Blackfin: cpufreq: use a constant latency
Blackfin: bf538: add support for extended GPIO banks
Blackfin: update bfin_rotary defines
Blackfin: punt cache lock documentation
Blackfin: fix typo in isp1760 platform name
Blackfin: bf537-stamp/bf548-ezkit: update ADXL34x resources
Blackfin: bf537-stamp: add ADXL346 orientation sensing support
Blackfin: bf537-stamp: update ADP5520 resources
Blackfin: bf537-stamp: add ADP8870 resources
Blackfin: bf537-stamp: add AD5258 i2c address
Blackfin: bf537-stamp: add ADF702x network driver resources
Mike Frysinger (47):
Blackfin: convert to generic checksum code
Blackfin: update defconfigs
Blackfin: calculate on-chip lengths at link time rather than run time
Blackfin: clean up isp1362 board resources
Blackfin: BF51x/BF52x: fill out bfin_clear_PPI_STATUS()
Blackfin: pull in firmware Kconfig
Blackfin: push down asm/ includes and out of bfin-global.h
Blackfin: convert DMA mutex to an atomic and drop redundant code
Blackfin: coreb: switched to unlocked_ioctl
Blackfin: rename BF542 host dma defines
Blackfin: fix some BF547 header copy & paste typos
Blackfin: unify BF547/8/9 headers
Blackfin: scrub unused RTC masks
Blackfin: scrub unused watchdog mmr masks
Blackfin: BF51x: dump non-existent SPI/NFC MMRs
Blackfin: punt OTP MMRs
Blackfin: punt unused MXVR masks
Blackfin: BF54x: punt useless "masks" for count/address MMRs
Blackfin: H8606/ip0x: drop redundant SPI ctl_reg settings
Blackfin: pull in asm/dpmc.h for power defines
Blackfin: unify duplicated power masks
Blackfin: unify DMA masks
Blackfin: add an example showing how to use the gptimers API
Blackfin: don't give CPU its own line in traps output
Blackfin: add an uncompressed vmImage target
Blackfin: comment the FDPIC PTRACE defines
Blackfin: force BFD target when linking modules
Blackfin: gptimers: use unsigned timer/group ids
Blackfin: punt dead/unused flash mem_init settings
bfin-otp: add BF51x to the supported arch list
Blackfin: reject NULL callback in set_dma_callback()
Blackfin: finish_atomic_sections: optimize the RTS step
Blackfin: push BF5Xx configs down into mach-specific Kconfigs
Blackfin: drop ptrace() write support for fixed code/bootrom
Blackfin: io.h: fix random busted whitespace
Blackfin: BF537: push down error masks to avoid namespace pollution
Blackfin: BF52x: unify def/cdef headers
Blackfin: BF51x: unify def/cdef headers
Blackfin: bf537-stamp: kill AD714x board-specific Kconfigs
Blackfin: drop unused ax88180 resources
Blackfin: ip0x: pull in asm/portmux.h for P_xxx defines
Blackfin: convert cyc2ns() to clocksource_cyc2ns()
Blackfin: kgdb_test: clean up code a bit
Blackfin: MPU: add missing __init markings
Blackfin: NOMPU: skip DMA ICPLB hole when it is redundant
Blackfin: drop duplicate sched_clock
Blackfin: define __NR_recvmmsg
Philippe Gerum (4):
Blackfin/ipipe: prepare status bitops for SMP support
Blackfin/ipipe: fix forward ref to barrier()
Blackfin/ipipe: introduce support for CONFIG_MPU
Blackfin/ipipe: update version stamp
Robin Getz (2):
Blackfin: announce current cpu rev when booting
Blackfin: don't walk VMAs when oopsing
Sonic Zhang (1):
Blackfin: kgdb: punt dead code
Valentin Yakovenkov (1):
Blackfin: add support for the Acvilon BF561 board
Yi Li (4):
Blackfin: fix gptimer0 clock source compile warning
Blackfin: unify sched_clock() handling between clock sources
Blackfin: use common code for cycle->nanosecond conversion
Blackfin: SMP: don't start up core b until its state has been completely onlined
Documentation/blackfin/00-INDEX | 3 -
Documentation/blackfin/Makefile | 6 +
Documentation/blackfin/cache-lock.txt | 48 -
Documentation/blackfin/cachefeatures.txt | 10 -
Documentation/blackfin/gptimers-example.c | 83 +
arch/blackfin/Kconfig | 41 +-
arch/blackfin/Makefile | 4 +-
arch/blackfin/boot/Makefile | 6 +-
arch/blackfin/configs/BF518F-EZBRD_defconfig | 14 +-
arch/blackfin/configs/BF526-EZBRD_defconfig | 2 +
arch/blackfin/configs/BF527-EZKIT_defconfig | 2 +
arch/blackfin/configs/BF533-EZKIT_defconfig | 2 +
arch/blackfin/configs/BF533-STAMP_defconfig | 2 +
arch/blackfin/configs/BF537-STAMP_defconfig | 7 +-
arch/blackfin/configs/BF538-EZKIT_defconfig | 2 +
arch/blackfin/configs/BF548-EZKIT_defconfig | 332 ++-
arch/blackfin/configs/BF561-ACVILON_defconfig | 1643 +++++++++++++
arch/blackfin/configs/BF561-EZKIT_defconfig | 214 +-
arch/blackfin/configs/BlackStamp_defconfig | 2 +
arch/blackfin/configs/CM-BF527_defconfig | 390 ++-
arch/blackfin/configs/CM-BF533_defconfig | 631 +++---
arch/blackfin/configs/CM-BF537E_defconfig | 334 +++-
arch/blackfin/configs/CM-BF537U_defconfig | 620 +++--
arch/blackfin/configs/CM-BF548_defconfig | 793 ++++---
arch/blackfin/configs/CM-BF561_defconfig | 558 ++++--
arch/blackfin/configs/H8606_defconfig | 2 +
arch/blackfin/configs/IP0X_defconfig | 2 +
arch/blackfin/configs/PNAV-10_defconfig | 2 +
arch/blackfin/configs/SRV1_defconfig | 4 +-
arch/blackfin/configs/TCM-BF537_defconfig | 577 ++++-
arch/blackfin/include/asm/bfin-global.h | 10 +-
arch/blackfin/include/asm/bug.h | 2 +-
arch/blackfin/include/asm/cacheflush.h | 1 +
arch/blackfin/include/asm/checksum.h | 70 +-
arch/blackfin/include/asm/clocks.h | 2 +
arch/blackfin/include/asm/dma-mapping.h | 121 +-
arch/blackfin/include/asm/dma.h | 93 +-
arch/blackfin/include/asm/dpmc.h | 107 +-
arch/blackfin/include/asm/gpio.h | 5 +
arch/blackfin/include/asm/gptimers.h | 32 +-
arch/blackfin/include/asm/io.h | 95 +-
arch/blackfin/include/asm/ipipe.h | 14 +-
arch/blackfin/include/asm/ipipe_base.h | 26 +-
arch/blackfin/include/asm/irqflags.h | 13 +-
arch/blackfin/include/asm/kgdb.h | 3 -
arch/blackfin/include/asm/mem_init.h | 153 --
arch/blackfin/include/asm/mmu_context.h | 33 +-
arch/blackfin/include/asm/pci.h | 130 +-
arch/blackfin/include/asm/ptrace.h | 6 +-
arch/blackfin/include/asm/sections.h | 16 +-
arch/blackfin/include/asm/thread_info.h | 2 +
arch/blackfin/include/asm/trace.h | 2 +
arch/blackfin/include/asm/uaccess.h | 4 +-
arch/blackfin/include/asm/unistd.h | 3 +-
arch/blackfin/kernel/bfin_dma_5xx.c | 52 +-
arch/blackfin/kernel/bfin_gpio.c | 99 +
arch/blackfin/kernel/cplb-mpu/cplbinit.c | 2 +-
arch/blackfin/kernel/cplb-mpu/cplbmgr.c | 13 +-
arch/blackfin/kernel/cplb-nompu/cplbinit.c | 31 +-
arch/blackfin/kernel/dma-mapping.c | 68 +-
arch/blackfin/kernel/gptimers.c | 32 +-
arch/blackfin/kernel/ipipe.c | 67 +
arch/blackfin/kernel/kgdb.c | 17 -
arch/blackfin/kernel/kgdb_test.c | 67 +-
arch/blackfin/kernel/process.c | 95 +-
arch/blackfin/kernel/ptrace.c | 13 -
arch/blackfin/kernel/setup.c | 46 +-
arch/blackfin/kernel/signal.c | 18 +
arch/blackfin/kernel/time-ts.c | 47 +-
arch/blackfin/kernel/time.c | 8 -
arch/blackfin/kernel/traps.c | 45 +-
arch/blackfin/kernel/vmlinux.lds.S | 28 +-
arch/blackfin/lib/Makefile | 2 +-
arch/blackfin/lib/checksum.c | 125 -
arch/blackfin/mach-bf518/Kconfig | 4 +
arch/blackfin/mach-bf518/include/mach/blackfin.h | 6 -
arch/blackfin/mach-bf518/include/mach/cdefBF514.h | 13 +-
arch/blackfin/mach-bf518/include/mach/cdefBF516.h | 80 +-
arch/blackfin/mach-bf518/include/mach/cdefBF518.h | 247 +--
.../mach-bf518/include/mach/cdefBF51x_base.h | 75 +-
arch/blackfin/mach-bf518/include/mach/defBF514.h | 45 +-
arch/blackfin/mach-bf518/include/mach/defBF516.h | 213 +--
arch/blackfin/mach-bf518/include/mach/defBF518.h | 592 +-----
.../mach-bf518/include/mach/defBF51x_base.h | 186 --
arch/blackfin/mach-bf527/Kconfig | 4 +
arch/blackfin/mach-bf527/boards/cm_bf527.c | 48 +-
arch/blackfin/mach-bf527/boards/ezkit.c | 62 +-
arch/blackfin/mach-bf527/include/mach/blackfin.h | 6 -
arch/blackfin/mach-bf527/include/mach/cdefBF525.h | 11 +-
arch/blackfin/mach-bf527/include/mach/cdefBF527.h | 424 +----
.../mach-bf527/include/mach/cdefBF52x_base.h | 23 +-
arch/blackfin/mach-bf527/include/mach/defBF525.h | 11 +-
arch/blackfin/mach-bf527/include/mach/defBF527.h | 679 +------
.../mach-bf527/include/mach/defBF52x_base.h | 186 --
arch/blackfin/mach-bf533/boards/H8606.c | 8 -
arch/blackfin/mach-bf533/boards/ip0x.c | 15 +-
arch/blackfin/mach-bf533/boards/stamp.c | 6 -
arch/blackfin/mach-bf533/include/mach/defBF532.h | 115 +-
arch/blackfin/mach-bf537/boards/pnav10.c | 46 -
arch/blackfin/mach-bf537/boards/stamp.c | 386 ++-
arch/blackfin/mach-bf537/include/mach/bf537.h | 10 -
arch/blackfin/mach-bf537/include/mach/blackfin.h | 6 -
arch/blackfin/mach-bf537/include/mach/defBF534.h | 95 -
arch/blackfin/mach-bf538/Makefile | 1 +
arch/blackfin/mach-bf538/boards/ezkit.c | 42 +
arch/blackfin/mach-bf538/ext-gpio.c | 123 +
arch/blackfin/mach-bf538/include/mach/blackfin.h | 6 -
arch/blackfin/mach-bf538/include/mach/defBF539.h | 1261 +----------
arch/blackfin/mach-bf538/include/mach/gpio.h | 7 +-
arch/blackfin/mach-bf538/include/mach/portmux.h | 2 +-
arch/blackfin/mach-bf548/Kconfig | 24 +
arch/blackfin/mach-bf548/boards/ezkit.c | 59 +-
arch/blackfin/mach-bf548/include/mach/bf548.h | 12 -
arch/blackfin/mach-bf548/include/mach/blackfin.h | 6 -
arch/blackfin/mach-bf548/include/mach/cdefBF547.h | 12 +-
arch/blackfin/mach-bf548/include/mach/cdefBF548.h | 788 +------
arch/blackfin/mach-bf548/include/mach/cdefBF549.h | 1533 +------------
.../mach-bf548/include/mach/cdefBF54x_base.h | 22 -
arch/blackfin/mach-bf548/include/mach/defBF544.h | 4 +-
arch/blackfin/mach-bf548/include/mach/defBF547.h | 10 +-
arch/blackfin/mach-bf548/include/mach/defBF548.h | 1203 +----------
arch/blackfin/mach-bf548/include/mach/defBF549.h | 2526 +-------------------
.../mach-bf548/include/mach/defBF54x_base.h | 289 ---
arch/blackfin/mach-bf561/boards/Kconfig | 7 +
arch/blackfin/mach-bf561/boards/Makefile | 1 +
arch/blackfin/mach-bf561/boards/acvilon.c | 551 +++++
arch/blackfin/mach-bf561/boards/ezkit.c | 28 +-
arch/blackfin/mach-bf561/coreb.c | 8 +-
arch/blackfin/mach-bf561/include/mach/defBF561.h | 101 -
arch/blackfin/mach-bf561/smp.c | 17 +-
arch/blackfin/mach-common/clocks-init.c | 1 +
arch/blackfin/mach-common/cpufreq.c | 5 +-
arch/blackfin/mach-common/dpmc_modes.S | 30 +
arch/blackfin/mach-common/entry.S | 4 +-
arch/blackfin/mach-common/ints-priority.c | 15 +-
arch/blackfin/mach-common/smp.c | 16 +-
drivers/char/Kconfig | 2 +-
137 files changed, 6847 insertions(+), 13625 deletions(-)
create mode 100644 Documentation/blackfin/Makefile
delete mode 100644 Documentation/blackfin/cache-lock.txt
create mode 100644 Documentation/blackfin/gptimers-example.c
create mode 100644 arch/blackfin/configs/BF561-ACVILON_defconfig
delete mode 100644 arch/blackfin/lib/checksum.c
create mode 100644 arch/blackfin/mach-bf538/ext-gpio.c
create mode 100644 arch/blackfin/mach-bf561/boards/acvilon.c
next reply other threads:[~2009-12-15 17:36 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-15 17:36 Mike Frysinger [this message]
2009-12-15 17:44 ` Mike Frysinger
-- strict thread matches above, loose matches on Subject: below --
2011-10-26 8:34 [PATCH 00/15] Blackfin updates for 3.2-rc0 Mike Frysinger
2011-10-26 8:36 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2011-07-23 5:29 [PATCH 00/43] Blackfin updates for v3.1-rc0 Mike Frysinger
2011-07-23 14:05 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2011-06-03 17:04 Mike Frysinger
2011-05-29 2:38 [PATCH 0/8] (some) Blackfin updates for 2.6.40 Mike Frysinger
2011-05-29 2:40 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2011-05-25 18:44 [PATCH 00/37] Blackfin updates for 2.6.40-rc1 Mike Frysinger
2011-05-25 19:23 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2011-04-14 19:27 Mike Frysinger
2011-03-30 5:09 [PATCH 0/3] Blackfin fixes for 2.6.39-rc1 Mike Frysinger
2011-03-30 5:11 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2011-03-24 5:10 [PATCH 0/4] Blackfin updates for 2.6.39-rc0 (part two) Mike Frysinger
2011-03-24 5:11 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2011-03-18 18:11 [PATCH 00/32] Blackfin updates for 2.6.39-rc0 Mike Frysinger
2011-03-18 18:12 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2011-03-04 8:58 Mike Frysinger
2011-01-10 12:26 [PATCH 00/52] Blackfin updates for 2.6.38 Mike Frysinger
2011-01-11 0:23 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2010-10-25 9:00 [PATCH 0/5] Blackfin updates for 2.6.37 (part 2) Mike Frysinger
2010-10-26 1:26 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2010-10-22 22:39 [PATCH 00/47] Blackfin updates for 2.6.37 Mike Frysinger
2010-10-23 3:50 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2010-08-27 23:08 [PATCH 0/2] Blackfin fixes for 2.6.36-rc2 Mike Frysinger
2010-08-28 20:16 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2010-08-23 8:40 [PATCH 0/3] Blackfin updates for 2.6.36-rc2 Mike Frysinger
2010-08-23 20:23 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2010-08-06 16:30 Blackfin updates for 2.6.36-rc0 Mike Frysinger
2010-08-06 20:57 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2010-05-22 17:10 [PATCH 00/30] Blackfin updates for 2.6.35 Mike Frysinger
2010-05-22 17:13 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2010-03-09 14:25 [PATCH 00/96] Blackfin updates for 2.6.34 Mike Frysinger
2010-03-09 14:28 ` Pull request blackfin.git (for-linus branch) Mike Frysinger
2009-11-26 21:26 Mike Frysinger
2009-10-09 3:59 Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1260898610-25713-1-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®