From: Jason Wessel <jason.wessel@windriver.com>
To: linux-kernel@vger.kernel.org
Cc: kgdb-bugreport@lists.sourceforge.net, mingo@elte.hu,
Jason Wessel <jason.wessel@windriver.com>
Subject: [PATCH 15/40] kgdb: gdb "monitor" -> kdb passthrough
Date: Thu, 14 Jan 2010 08:59:11 -0600 [thread overview]
Message-ID: <1263481176-1897-16-git-send-email-jason.wessel@windriver.com> (raw)
In-Reply-To: <1263481176-1897-1-git-send-email-jason.wessel@windriver.com>
One of the driving forces behind integrating another front end (kdb)
to the debug core is to allow front end commands to be accessible via
gdb's monitor command. It is true that you could write gdb macros to
get certain data, but you may want to just use gdb to access the
commands that are available in the kdb front end.
This patch implements the Rcmd gdb stub packet. In gdb you access
this with the "monitor" command. For instance you could type "monitor
help", "monitor lsmod" or "monitor ps A" etc...
There is no error checking or command restrictions on what you can and
cannot access at this point. Doing something like trying to set
breakpoints with the monitor command is going to cause nothing but
problems. Perhaps in the future only the commands that are actually
known to work with the gdb monitor command will be available.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
kernel/debug/debug_core.c | 2 +-
kernel/debug/debug_core.h | 2 ++
kernel/debug/gdbstub.c | 22 ++++++++++++++++++++++
kernel/debug/kdb/kdb_io.c | 13 +++++++++----
kernel/debug/kdb/kdb_private.h | 1 -
5 files changed, 34 insertions(+), 6 deletions(-)
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 4a90148..1281d1d 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -81,7 +81,7 @@ static int kgdb_use_con;
int dbg_switch_cpu;
/* Use kdb or gdbserver mode */
-static int dbg_kdb_mode = 1;
+int dbg_kdb_mode = 1;
static int __init opt_kgdb_con(char *str)
{
diff --git a/kernel/debug/debug_core.h b/kernel/debug/debug_core.h
index cf14dae..7d374c0 100644
--- a/kernel/debug/debug_core.h
+++ b/kernel/debug/debug_core.h
@@ -67,9 +67,11 @@ extern void gdbstub_msg_write(const char *s, int len);
/* gdbstub functions used for kdb <-> gdbstub transition */
extern int gdbstub_state(struct kgdb_state *ks, char *cmd);
+extern int dbg_kdb_mode;
#ifdef CONFIG_KGDB_KDB
extern int kdb_stub(struct kgdb_state *ks);
+extern int kdb_parse(const char *cmdstr);
#else /* ! CONFIG_KGDB_KDB */
static inline int kdb_stub(struct kgdb_state *ks)
{
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
index 6965b5c..cee2c0e 100644
--- a/kernel/debug/gdbstub.c
+++ b/kernel/debug/gdbstub.c
@@ -201,6 +201,9 @@ void gdbstub_msg_write(const char *s, int len)
int wcount;
int i;
+ if (len == 0)
+ len = strlen(s);
+
/* 'O'utput */
gdbmsgbuf[0] = 'O';
@@ -690,6 +693,25 @@ static void gdb_cmd_query(struct kgdb_state *ks)
kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
}
break;
+#ifdef CONFIG_KGDB_KDB
+ case 'R':
+ if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) {
+ int len = strlen(remcom_in_buffer + 6);
+
+ if ((len % 2) != 0) {
+ strcpy(remcom_out_buffer, "E01");
+ break;
+ }
+ kgdb_hex2mem(remcom_in_buffer + 6,
+ remcom_out_buffer, len);
+ len = len / 2;
+ remcom_out_buffer[len++] = 0;
+
+ kdb_parse(remcom_out_buffer);
+ strcpy(remcom_out_buffer, "OK");
+ }
+ break;
+#endif
}
}
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 01fc16d..8fcd22c 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -21,6 +21,7 @@
#include <linux/smp.h>
#include <linux/nmi.h>
#include <linux/delay.h>
+#include <linux/kgdb.h>
#include <linux/kdb.h>
#include <linux/kallsyms.h>
#include "kdb_private.h"
@@ -668,10 +669,14 @@ kdb_printit:
* Write to all consoles.
*/
retlen = strlen(kdb_buffer);
- while (c) {
- c->write(c, kdb_buffer, retlen);
- touch_nmi_watchdog();
- c = c->next;
+ if (!dbg_kdb_mode && kgdb_connected) {
+ gdbstub_msg_write(kdb_buffer, retlen);
+ } else {
+ while (c) {
+ c->write(c, kdb_buffer, retlen);
+ touch_nmi_watchdog();
+ c = c->next;
+ }
}
if (logging) {
saved_loglevel = console_loglevel;
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
index 768655e..2db38ff 100644
--- a/kernel/debug/kdb/kdb_private.h
+++ b/kernel/debug/kdb/kdb_private.h
@@ -317,7 +317,6 @@ extern unsigned long kdb_task_state(const struct task_struct *p,
unsigned long mask);
extern void kdb_ps_suppressed(void);
extern void kdb_ps1(const struct task_struct *p);
-extern int kdb_parse(const char *cmdstr);
extern void kdb_print_nameval(const char *name, unsigned long val);
extern void kdb_send_sig_info(struct task_struct *p,
struct siginfo *info, int seqno);
--
1.6.3.1.9.g95405b
next prev parent reply other threads:[~2010-01-14 15:09 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-14 14:58 [PATCH 0/40] kgdb, kdb and atomic kernel modesetting series Jason Wessel
2010-01-14 14:58 ` [PATCH 01/40] softlockup: add sched_clock_tick() to avoid kernel warning on kgdb resume Jason Wessel
2010-01-14 14:58 ` [PATCH 02/40] x86,hw_breakpoint,kgdb: kgdb to use hw_breakpoint API Jason Wessel
2010-01-14 14:58 ` [PATCH 03/40] Move kernel/kgdb.c to kernel/debug/debug_core.c Jason Wessel
2010-01-14 14:59 ` [PATCH 04/40] Separate the gdbstub from the debug core Jason Wessel
2010-01-14 14:59 ` [PATCH 05/40] kgdb: eliminate kgdb_wait(), all cpus enter the same way Jason Wessel
2010-01-14 14:59 ` [PATCH 06/40] kgdb,sparc: Add in kgdb_arch_set_pc for sparc Jason Wessel
2010-01-14 14:59 ` [PATCH 07/40] kgdb,sh: update superh kgdb exception handling Jason Wessel
2010-01-14 14:59 ` [PATCH 08/40] kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin Jason Wessel
2010-01-14 14:59 ` [PATCH 09/40] kdb: core for kgdb back end (1 of 2) Jason Wessel
2010-01-14 14:59 ` [PATCH 10/40] kdb: core for kgdb back end (2 " Jason Wessel
2010-01-14 14:59 ` [PATCH 11/40] kgdb: core changes to support kdb Jason Wessel
2010-01-14 14:59 ` [PATCH 12/40] kgdb,8250,pl011: Return immediately from console poll Jason Wessel
2010-01-14 14:59 ` [PATCH 13/40] sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code Jason Wessel
2010-01-14 14:59 ` [PATCH 14/40] sparc,sunzilog: Add console polling support for sunzilog serial driver Jason Wessel
2010-01-14 14:59 ` Jason Wessel [this message]
2010-01-14 14:59 ` [PATCH 16/40] kgdboc,keyboard: Keyboard driver for kdb with kgdb Jason Wessel
2010-01-14 14:59 ` [PATCH 17/40] kgdb,docs: Update the kgdb docs to include kdb Jason Wessel
2010-01-14 14:59 ` [PATCH 18/40] kgdb: remove post_primary_code references Jason Wessel
2010-01-14 14:59 ` [PATCH 19/40] x86,kgdb: Add low level debug hook Jason Wessel
2010-01-14 14:59 ` [PATCH 20/40] arm,kgdb: Add hook to catch an oops with debugger Jason Wessel
2010-01-14 17:48 ` Russell King - ARM Linux
2010-01-14 18:57 ` Jason Wessel
2010-01-14 20:29 ` Jason Wessel
2010-01-14 20:46 ` Russell King - ARM Linux
2010-01-18 14:30 ` Jason Wessel
2010-01-20 16:03 ` Russell King - ARM Linux
2010-01-20 17:01 ` Jason Wessel
2010-01-14 14:59 ` [PATCH 21/40] powerpc,kgdb: Introduce low level trap catching Jason Wessel
2010-01-14 14:59 ` [PATCH 22/40] mips,kgdb: kdb low level trap catch and stack trace Jason Wessel
2010-01-14 17:29 ` David Daney
2010-01-14 22:32 ` Jason Wessel
2010-01-14 14:59 ` [PATCH 23/40] kgdb: Add the ability to schedule a breakpoint via a tasklet Jason Wessel
2010-01-14 14:59 ` [PATCH 24/40] kgdboc,kdb: Allow kdb to work on a non open console port Jason Wessel
2010-01-14 14:59 ` [PATCH 25/40] printk,kdb: capture printk() when in kdb shell Jason Wessel
2010-01-14 14:59 ` [PATCH 26/40] keyboard, input: Add hook to input to allow low level event clear Jason Wessel
2010-01-14 14:59 ` [PATCH 27/40] debug_core,kdb: Allow the debug core to process a recursive debug entry Jason Wessel
2010-01-14 14:59 ` [PATCH 28/40] kdb,panic,debug_core: Allow the debug core to receive a panic before smp_send_stop() Jason Wessel
2010-01-14 14:59 ` [PATCH 29/40] MAINTAINERS: update kgdb, kdb, and debug_core info Jason Wessel
2010-01-14 14:59 ` [PATCH 30/40] kgdboc,debug_core: Add call backs to allow kernel mode switching Jason Wessel
2010-01-14 14:59 ` [PATCH 31/40] kgdb: add ops arg to kgdb console active & restore hooks Jason Wessel
2010-01-14 14:59 ` [PATCH 32/40] drm: add KGDB/KDB support Add support for KDB entry/exit Jason Wessel
2010-01-14 14:59 ` [PATCH 33/40] kms,kdb: Force unblank a console device Jason Wessel
2010-01-14 14:59 ` [PATCH 34/40] i915: when kgdb is active display compression should be off Jason Wessel
2010-01-14 14:59 ` [PATCH 35/40] drm_fb_helper: Preserve capability to use atomic kms Jason Wessel
2010-01-14 14:59 ` [PATCH 36/40] drm,i915 - atomic mutex hacks Jason Wessel
2010-01-14 14:59 ` [PATCH 37/40] kgdb,docs: Update the kgdb docs to include kms Jason Wessel
2010-01-14 14:59 ` [PATCH 38/40] kgdbts,sh: Add in breakpoint pc offset for superh Jason Wessel
2010-01-14 14:59 ` [PATCH 39/40] debug_core: Turn off tracing while in the debugger Jason Wessel
2010-01-15 0:10 ` Steven Rostedt
2010-01-15 14:03 ` Jason Wessel
2010-01-15 15:04 ` Steven Rostedt
2010-01-14 14:59 ` [PATCH 40/40] ftrace,kdb: Extend kdb to be able to dump the ftrace buffer Jason Wessel
2010-01-15 0:14 ` Steven Rostedt
2010-01-15 13:15 ` Jason Wessel
2010-01-30 2:02 ` [PATCH 0/40] kgdb, kdb and atomic kernel modesetting series Jon Masters
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263481176-1897-16-git-send-email-jason.wessel@windriver.com \
--to=jason.wessel@windriver.com \
--cc=kgdb-bugreport@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®