From: Jason Wessel <jason.wessel@windriver.com>
To: linux-kernel@vger.kernel.org
Cc: kgdb-bugreport@lists.sourceforge.net, mingo@elte.hu,
Jason Wessel <jason.wessel@windriver.com>
Subject: [PATCH 02/40] x86,hw_breakpoint,kgdb: kgdb to use hw_breakpoint API
Date: Thu, 14 Jan 2010 08:58:58 -0600 [thread overview]
Message-ID: <1263481176-1897-3-git-send-email-jason.wessel@windriver.com> (raw)
In-Reply-To: <1263481176-1897-1-git-send-email-jason.wessel@windriver.com>
In the 2.6.33 kernel, the hw_breakpoint API is now used for the
performance event counters. The hw_breakpoint_handler() now consumes
the hw breakpoints that were previously set by kgdb arch specific
code. In order for kgdb to work in conjunction with this core API
change, kgdb must use some of the low level functions of the
hw_breakpoint API to install, uninstall, and receive call backs for hw
breakpoints.
The kgdb core needs to call kgdb_disable_hw_debug anytime a slave cpu
enters kgdb_wait() in order to keep all the hw breakpoints in sync as
well as to prevent hitting a hw breakpoint while kgdb is active.
During the architecture specific initialization of kgdb, it will
pre-allocate 4 disabled (struct perf event **) structures. Kgdb will
use these to manage the capabilities for the 4 hw breakpoint
registers. Right now the hw_breakpoint API does not have a way to ask
how many breakpoints are available, on each CPU so it is possible that
the install of a breakpoint might fail when kgdb restores the system
to the run state. The intent of this patch is to first get the basic
functionality of hw breakpoints working and leave it to the person
debugging the kernel to understand what hw breakpoints are in use and
what restrictions have been imposed as a result.
While atomic, the x86 specific kgdb code will call
arch_uninstall_hw_breakpoint() and arch_install_hw_breakpoint() to
manage the cpu specific hw breakpoints.
The arch specific hw_breakpoint_handler() was changed to restore the
cpu specific dr7 instead of the dr7 that was locally saved, because
the dr7 can be modified while in a call back to kgdb.
The net result of these changes allow kgdb to use the same pool of
hw_breakpoints that are used by the perf event API, but neither knows
about future reservations for the available hw breakpoint slots.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
arch/x86/kernel/hw_breakpoint.c | 5 +-
arch/x86/kernel/kgdb.c | 191 +++++++++++++++++++++++++++------------
kernel/kgdb.c | 3 +
3 files changed, 139 insertions(+), 60 deletions(-)
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index 05d5fec..cbf19e0 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -466,7 +466,7 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args)
{
int i, cpu, rc = NOTIFY_STOP;
struct perf_event *bp;
- unsigned long dr7, dr6;
+ unsigned long dr6;
unsigned long *dr6_p;
/* The DR6 value is pointed by args->err */
@@ -477,7 +477,6 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args)
if ((dr6 & DR_TRAP_BITS) == 0)
return NOTIFY_DONE;
- get_debugreg(dr7, 7);
/* Disable breakpoints during exception handling */
set_debugreg(0UL, 7);
/*
@@ -525,7 +524,7 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args)
if (dr6 & (~DR_TRAP_BITS))
rc = NOTIFY_DONE;
- set_debugreg(dr7, 7);
+ set_debugreg(__get_cpu_var(cpu_dr7), 7);
put_cpu();
return rc;
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index dd74fe7..48384fa 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -42,6 +42,7 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/nmi.h>
+#include <linux/hw_breakpoint.h>
#include <asm/debugreg.h>
#include <asm/apicdef.h>
@@ -204,40 +205,27 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
static struct hw_breakpoint {
unsigned enabled;
- unsigned type;
- unsigned len;
unsigned long addr;
+ struct perf_event **pev;
} breakinfo[4];
static void kgdb_correct_hw_break(void)
{
- unsigned long dr7;
- int correctit = 0;
- int breakbit;
int breakno;
- get_debugreg(dr7, 7);
for (breakno = 0; breakno < 4; breakno++) {
- breakbit = 2 << (breakno << 1);
- if (!(dr7 & breakbit) && breakinfo[breakno].enabled) {
- correctit = 1;
- dr7 |= breakbit;
- dr7 &= ~(0xf0000 << (breakno << 2));
- dr7 |= ((breakinfo[breakno].len << 2) |
- breakinfo[breakno].type) <<
- ((breakno << 2) + 16);
- set_debugreg(breakinfo[breakno].addr, breakno);
-
- } else {
- if ((dr7 & breakbit) && !breakinfo[breakno].enabled) {
- correctit = 1;
- dr7 &= ~breakbit;
- dr7 &= ~(0xf0000 << (breakno << 2));
- }
- }
+ struct perf_event *bp;
+ int val;
+ int cpu = raw_smp_processor_id();
+ if (!breakinfo[breakno].enabled)
+ continue;
+ bp = *per_cpu_ptr(breakinfo[breakno].pev, cpu);
+ if (bp->attr.disabled != 1)
+ continue;
+ val = arch_install_hw_breakpoint(bp);
+ if (!val)
+ bp->attr.disabled = 0;
}
- if (correctit)
- set_debugreg(dr7, 7);
}
static int
@@ -259,46 +247,74 @@ kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
static void kgdb_remove_all_hw_break(void)
{
int i;
+ int cpu = raw_smp_processor_id();
+ struct perf_event *bp;
- for (i = 0; i < 4; i++)
- memset(&breakinfo[i], 0, sizeof(struct hw_breakpoint));
+ for (i = 0; i < 4; i++) {
+ if (!breakinfo[i].enabled)
+ continue;
+ bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
+ if (bp->attr.disabled == 1)
+ continue;
+ arch_uninstall_hw_breakpoint(bp);
+ bp->attr.disabled = 1;
+ }
}
static int
kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
{
- unsigned type;
int i;
+ struct perf_event *bp;
+ struct arch_hw_breakpoint *info;
for (i = 0; i < 4; i++)
if (!breakinfo[i].enabled)
break;
if (i == 4)
return -1;
-
+ bp = *per_cpu_ptr(breakinfo[i].pev, raw_smp_processor_id());
+ info = counter_arch_bp(bp);
switch (bptype) {
case BP_HARDWARE_BREAKPOINT:
- type = 0;
- len = 1;
+ len = 1;
+ info->type = X86_BREAKPOINT_EXECUTE;
break;
case BP_WRITE_WATCHPOINT:
- type = 1;
+ info->type = X86_BREAKPOINT_WRITE;
break;
case BP_ACCESS_WATCHPOINT:
- type = 3;
+ info->type = X86_BREAKPOINT_RW;
break;
default:
return -1;
}
- if (len == 1 || len == 2 || len == 4)
- breakinfo[i].len = len - 1;
- else
+ switch (len) {
+ case 1:
+ info->len = X86_BREAKPOINT_LEN_1;
+ break;
+ case 2:
+ info->len = X86_BREAKPOINT_LEN_2;
+ break;
+ case 4:
+ info->len = X86_BREAKPOINT_LEN_4;
+ break;
+#ifdef CONFIG_X86_64
+ case 8:
+ info->len = X86_BREAKPOINT_LEN_8;
+ break;
+#endif
+ default:
return -1;
+ }
- breakinfo[i].enabled = 1;
breakinfo[i].addr = addr;
- breakinfo[i].type = type;
+ info->address = addr;
+ bp->attr.bp_addr = info->address;
+ bp->attr.bp_len = info->len;
+ bp->attr.bp_type = info->type;
+ breakinfo[i].enabled = 1;
return 0;
}
@@ -313,8 +329,21 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
*/
void kgdb_disable_hw_debug(struct pt_regs *regs)
{
+ int i;
+ int cpu = raw_smp_processor_id();
+ struct perf_event *bp;
+
/* Disable hardware debugging while we are in kgdb: */
set_debugreg(0UL, 7);
+ for (i = 0; i < 4; i++) {
+ if (!breakinfo[i].enabled)
+ continue;
+ bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
+ if (bp->attr.disabled == 1)
+ continue;
+ arch_uninstall_hw_breakpoint(bp);
+ bp->attr.disabled = 1;
+ }
}
/**
@@ -378,7 +407,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
struct pt_regs *linux_regs)
{
unsigned long addr;
- unsigned long dr6;
char *ptr;
int newPC;
@@ -404,20 +432,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
raw_smp_processor_id());
}
- get_debugreg(dr6, 6);
- if (!(dr6 & 0x4000)) {
- int breakno;
-
- for (breakno = 0; breakno < 4; breakno++) {
- if (dr6 & (1 << breakno) &&
- breakinfo[breakno].type == 0) {
- /* Set restore flag: */
- linux_regs->flags |= X86_EFLAGS_RF;
- break;
- }
- }
- }
- set_debugreg(0UL, 6);
kgdb_correct_hw_break();
return 0;
@@ -448,6 +462,7 @@ single_step_cont(struct pt_regs *regs, struct die_args *args)
}
static int was_in_debug_nmi[NR_CPUS];
+static int recieved_hw_brk[NR_CPUS];
static int __kgdb_notify(struct die_args *args, unsigned long cmd)
{
@@ -485,16 +500,19 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
break;
case DIE_DEBUG:
- if (atomic_read(&kgdb_cpu_doing_single_step) ==
- raw_smp_processor_id()) {
+ if (atomic_read(&kgdb_cpu_doing_single_step) != -1) {
if (user_mode(regs))
return single_step_cont(regs, args);
break;
- } else if (test_thread_flag(TIF_SINGLESTEP))
+ } else if (test_thread_flag(TIF_SINGLESTEP)) {
/* This means a user thread is single stepping
* a system call which should be ignored
*/
return NOTIFY_DONE;
+ } else if (recieved_hw_brk[raw_smp_processor_id()] == 1) {
+ recieved_hw_brk[raw_smp_processor_id()] = 0;
+ return NOTIFY_STOP;
+ }
/* fall through */
default:
if (user_mode(regs))
@@ -531,6 +549,23 @@ static struct notifier_block kgdb_notifier = {
.priority = -INT_MAX,
};
+static void kgdb_hw_bp(struct perf_event *bp, int nmi,
+ struct perf_sample_data *data,
+ struct pt_regs *regs)
+{
+ struct die_args args;
+
+ args.trapnr = 0;
+ args.signr = 5;
+ args.err = 0;
+ args.regs = regs;
+ args.str = "debug";
+ if (__kgdb_notify(&args, DIE_DEBUG) == NOTIFY_STOP)
+ recieved_hw_brk[raw_smp_processor_id()] = 1;
+ else
+ recieved_hw_brk[raw_smp_processor_id()] = 0;
+}
+
/**
* kgdb_arch_init - Perform any architecture specific initalization.
*
@@ -539,7 +574,42 @@ static struct notifier_block kgdb_notifier = {
*/
int kgdb_arch_init(void)
{
- return register_die_notifier(&kgdb_notifier);
+ int i, cpu;
+ int ret;
+ struct perf_event_attr attr;
+ struct perf_event **pevent;
+
+ ret = register_die_notifier(&kgdb_notifier);
+ if (ret != 0)
+ return ret;
+ /*
+ * Pre-allocate the hw breakpoint structions in the non-atomic
+ * portion of kgdb because this operation requires mutexs to
+ * complete.
+ */
+ attr.bp_addr = (unsigned long)kgdb_arch_init;
+ attr.type = PERF_TYPE_BREAKPOINT;
+ attr.bp_len = HW_BREAKPOINT_LEN_1;
+ attr.bp_type = HW_BREAKPOINT_X;
+ attr.disabled = 1;
+ for (i = 0; i < 4; i++) {
+ breakinfo[i].pev = register_wide_hw_breakpoint(&attr,
+ kgdb_hw_bp);
+ if (IS_ERR(breakinfo[i].pev)) {
+ printk(KERN_ERR "kgdb: Could not allocate hw breakpoints\n");
+ breakinfo[i].pev = NULL;
+ kgdb_arch_exit();
+ return -1;
+ }
+ for_each_online_cpu(cpu) {
+ pevent = per_cpu_ptr(breakinfo[i].pev, cpu);
+ if (pevent[0]->destroy != NULL) {
+ pevent[0]->destroy = NULL;
+ release_bp_slot(*pevent);
+ }
+ }
+ }
+ return ret;
}
/**
@@ -550,6 +620,13 @@ int kgdb_arch_init(void)
*/
void kgdb_arch_exit(void)
{
+ int i;
+ for (i = 0; i < 4; i++) {
+ if (breakinfo[i].pev) {
+ unregister_wide_hw_breakpoint(breakinfo[i].pev);
+ breakinfo[i].pev = NULL;
+ }
+ }
unregister_die_notifier(&kgdb_notifier);
}
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 87f2cc5..761fdd2 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -583,6 +583,9 @@ static void kgdb_wait(struct pt_regs *regs)
smp_wmb();
atomic_set(&cpu_in_kgdb[cpu], 1);
+ /* Disable any cpu specific hw breakpoints */
+ kgdb_disable_hw_debug(regs);
+
/* Wait till primary CPU is done with debugging */
while (atomic_read(&passive_cpu_wait[cpu]))
cpu_relax();
--
1.6.3.1.9.g95405b
next prev parent reply other threads:[~2010-01-14 15:00 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-14 14:58 [PATCH 0/40] kgdb, kdb and atomic kernel modesetting series Jason Wessel
2010-01-14 14:58 ` [PATCH 01/40] softlockup: add sched_clock_tick() to avoid kernel warning on kgdb resume Jason Wessel
2010-01-14 14:58 ` Jason Wessel [this message]
2010-01-14 14:58 ` [PATCH 03/40] Move kernel/kgdb.c to kernel/debug/debug_core.c Jason Wessel
2010-01-14 14:59 ` [PATCH 04/40] Separate the gdbstub from the debug core Jason Wessel
2010-01-14 14:59 ` [PATCH 05/40] kgdb: eliminate kgdb_wait(), all cpus enter the same way Jason Wessel
2010-01-14 14:59 ` [PATCH 06/40] kgdb,sparc: Add in kgdb_arch_set_pc for sparc Jason Wessel
2010-01-14 14:59 ` [PATCH 07/40] kgdb,sh: update superh kgdb exception handling Jason Wessel
2010-01-14 14:59 ` [PATCH 08/40] kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin Jason Wessel
2010-01-14 14:59 ` [PATCH 09/40] kdb: core for kgdb back end (1 of 2) Jason Wessel
2010-01-14 14:59 ` [PATCH 10/40] kdb: core for kgdb back end (2 " Jason Wessel
2010-01-14 14:59 ` [PATCH 11/40] kgdb: core changes to support kdb Jason Wessel
2010-01-14 14:59 ` [PATCH 12/40] kgdb,8250,pl011: Return immediately from console poll Jason Wessel
2010-01-14 14:59 ` [PATCH 13/40] sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code Jason Wessel
2010-01-14 14:59 ` [PATCH 14/40] sparc,sunzilog: Add console polling support for sunzilog serial driver Jason Wessel
2010-01-14 14:59 ` [PATCH 15/40] kgdb: gdb "monitor" -> kdb passthrough Jason Wessel
2010-01-14 14:59 ` [PATCH 16/40] kgdboc,keyboard: Keyboard driver for kdb with kgdb Jason Wessel
2010-01-14 14:59 ` [PATCH 17/40] kgdb,docs: Update the kgdb docs to include kdb Jason Wessel
2010-01-14 14:59 ` [PATCH 18/40] kgdb: remove post_primary_code references Jason Wessel
2010-01-14 14:59 ` [PATCH 19/40] x86,kgdb: Add low level debug hook Jason Wessel
2010-01-14 14:59 ` [PATCH 20/40] arm,kgdb: Add hook to catch an oops with debugger Jason Wessel
2010-01-14 17:48 ` Russell King - ARM Linux
2010-01-14 18:57 ` Jason Wessel
2010-01-14 20:29 ` Jason Wessel
2010-01-14 20:46 ` Russell King - ARM Linux
2010-01-18 14:30 ` Jason Wessel
2010-01-20 16:03 ` Russell King - ARM Linux
2010-01-20 17:01 ` Jason Wessel
2010-01-14 14:59 ` [PATCH 21/40] powerpc,kgdb: Introduce low level trap catching Jason Wessel
2010-01-14 14:59 ` [PATCH 22/40] mips,kgdb: kdb low level trap catch and stack trace Jason Wessel
2010-01-14 17:29 ` David Daney
2010-01-14 22:32 ` Jason Wessel
2010-01-14 14:59 ` [PATCH 23/40] kgdb: Add the ability to schedule a breakpoint via a tasklet Jason Wessel
2010-01-14 14:59 ` [PATCH 24/40] kgdboc,kdb: Allow kdb to work on a non open console port Jason Wessel
2010-01-14 14:59 ` [PATCH 25/40] printk,kdb: capture printk() when in kdb shell Jason Wessel
2010-01-14 14:59 ` [PATCH 26/40] keyboard, input: Add hook to input to allow low level event clear Jason Wessel
2010-01-14 14:59 ` [PATCH 27/40] debug_core,kdb: Allow the debug core to process a recursive debug entry Jason Wessel
2010-01-14 14:59 ` [PATCH 28/40] kdb,panic,debug_core: Allow the debug core to receive a panic before smp_send_stop() Jason Wessel
2010-01-14 14:59 ` [PATCH 29/40] MAINTAINERS: update kgdb, kdb, and debug_core info Jason Wessel
2010-01-14 14:59 ` [PATCH 30/40] kgdboc,debug_core: Add call backs to allow kernel mode switching Jason Wessel
2010-01-14 14:59 ` [PATCH 31/40] kgdb: add ops arg to kgdb console active & restore hooks Jason Wessel
2010-01-14 14:59 ` [PATCH 32/40] drm: add KGDB/KDB support Add support for KDB entry/exit Jason Wessel
2010-01-14 14:59 ` [PATCH 33/40] kms,kdb: Force unblank a console device Jason Wessel
2010-01-14 14:59 ` [PATCH 34/40] i915: when kgdb is active display compression should be off Jason Wessel
2010-01-14 14:59 ` [PATCH 35/40] drm_fb_helper: Preserve capability to use atomic kms Jason Wessel
2010-01-14 14:59 ` [PATCH 36/40] drm,i915 - atomic mutex hacks Jason Wessel
2010-01-14 14:59 ` [PATCH 37/40] kgdb,docs: Update the kgdb docs to include kms Jason Wessel
2010-01-14 14:59 ` [PATCH 38/40] kgdbts,sh: Add in breakpoint pc offset for superh Jason Wessel
2010-01-14 14:59 ` [PATCH 39/40] debug_core: Turn off tracing while in the debugger Jason Wessel
2010-01-15 0:10 ` Steven Rostedt
2010-01-15 14:03 ` Jason Wessel
2010-01-15 15:04 ` Steven Rostedt
2010-01-14 14:59 ` [PATCH 40/40] ftrace,kdb: Extend kdb to be able to dump the ftrace buffer Jason Wessel
2010-01-15 0:14 ` Steven Rostedt
2010-01-15 13:15 ` Jason Wessel
2010-01-30 2:02 ` [PATCH 0/40] kgdb, kdb and atomic kernel modesetting series Jon Masters
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263481176-1897-3-git-send-email-jason.wessel@windriver.com \
--to=jason.wessel@windriver.com \
--cc=kgdb-bugreport@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®