From: Matthew Garrett <mjg@redhat.com>
To: torvalds@linux-foundation.org
Cc: linux-kernel@vger.kernel.org, Stuart Hayes <stuart_hayes@dell.com>
Subject: [PATCH 09/14] dell-laptop: Use buffer with 32-bit physical address
Date: Fri, 26 Feb 2010 10:18:42 -0500 [thread overview]
Message-ID: <1267197527-18062-10-git-send-email-mjg@redhat.com> (raw)
In-Reply-To: <1267197527-18062-1-git-send-email-mjg@redhat.com>
From: Stuart Hayes <stuart_hayes@dell.com>
Calls to communicate with system firmware via a SMI (using dcdbas)
need to use a buffer that has a physical address of 4GB or less.
Currently the dell-laptop driver does not guarantee this, and when the
buffer address is higher than 4GB, the address is truncated to 32 bits
and the SMI handler writes to the wrong memory address.
Signed-off-by: Stuart Hayes <stuart_hayes@dell.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
---
drivers/platform/x86/dell-laptop.c | 122 ++++++++++++++++++++++++-----------
1 files changed, 83 insertions(+), 39 deletions(-)
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index d8b1b39..1a0bfd4 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -22,6 +22,7 @@
#include <linux/rfkill.h>
#include <linux/power_supply.h>
#include <linux/acpi.h>
+#include <linux/mm.h>
#include <linux/i8042.h>
#include "../../firmware/dcdbas.h"
@@ -123,6 +124,21 @@ static struct dmi_system_id __devinitdata dell_blacklist[] = {
{}
};
+static struct calling_interface_buffer *buffer;
+struct page *bufferpage;
+DEFINE_MUTEX(buffer_mutex);
+
+static void get_buffer(void)
+{
+ mutex_lock(&buffer_mutex);
+ memset(buffer, 0, sizeof(struct calling_interface_buffer));
+}
+
+static void release_buffer(void)
+{
+ mutex_unlock(&buffer_mutex);
+}
+
static void __init parse_da_table(const struct dmi_header *dm)
{
/* Final token is a terminator, so we don't want to copy it */
@@ -225,30 +241,35 @@ dell_send_request(struct calling_interface_buffer *buffer, int class,
static int dell_rfkill_set(void *data, bool blocked)
{
- struct calling_interface_buffer buffer;
int disable = blocked ? 1 : 0;
unsigned long radio = (unsigned long)data;
+ int ret = 0;
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- dell_send_request(&buffer, 17, 11);
- if (!(buffer.output[1] & BIT(16)))
- return -EINVAL;
+ get_buffer();
+ dell_send_request(buffer, 17, 11);
- buffer.input[0] = (1 | (radio<<8) | (disable << 16));
- dell_send_request(&buffer, 17, 11);
+ if (!(buffer->output[1] & BIT(16))) {
+ ret = -EINVAL;
+ goto out;
+ }
- return 0;
+ buffer->input[0] = (1 | (radio<<8) | (disable << 16));
+ dell_send_request(buffer, 17, 11);
+
+out:
+ release_buffer();
+ return ret;
}
static void dell_rfkill_query(struct rfkill *rfkill, void *data)
{
- struct calling_interface_buffer buffer;
int status;
int bit = (unsigned long)data + 16;
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- dell_send_request(&buffer, 17, 11);
- status = buffer.output[1];
+ get_buffer();
+ dell_send_request(buffer, 17, 11);
+ status = buffer->output[1];
+ release_buffer();
rfkill_set_sw_state(rfkill, !!(status & BIT(bit)));
rfkill_set_hw_state(rfkill, !(status & BIT(16)));
@@ -273,7 +294,6 @@ static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill);
static int __init dell_setup_rfkill(void)
{
- struct calling_interface_buffer buffer;
int status;
int ret;
@@ -283,9 +303,10 @@ static int __init dell_setup_rfkill(void)
return 0;
}
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- dell_send_request(&buffer, 17, 11);
- status = buffer.output[1];
+ get_buffer();
+ dell_send_request(buffer, 17, 11);
+ status = buffer->output[1];
+ release_buffer();
if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) {
wifi_rfkill = rfkill_alloc("dell-wifi", &platform_device->dev,
@@ -361,39 +382,49 @@ static void dell_cleanup_rfkill(void)
static int dell_send_intensity(struct backlight_device *bd)
{
- struct calling_interface_buffer buffer;
+ int ret = 0;
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
- buffer.input[1] = bd->props.brightness;
+ get_buffer();
+ buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN);
+ buffer->input[1] = bd->props.brightness;
- if (buffer.input[0] == -1)
- return -ENODEV;
+ if (buffer->input[0] == -1) {
+ ret = -ENODEV;
+ goto out;
+ }
if (power_supply_is_system_supplied() > 0)
- dell_send_request(&buffer, 1, 2);
+ dell_send_request(buffer, 1, 2);
else
- dell_send_request(&buffer, 1, 1);
+ dell_send_request(buffer, 1, 1);
+out:
+ release_buffer();
return 0;
}
static int dell_get_intensity(struct backlight_device *bd)
{
- struct calling_interface_buffer buffer;
+ int ret = 0;
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
+ get_buffer();
+ buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN);
- if (buffer.input[0] == -1)
- return -ENODEV;
+ if (buffer->input[0] == -1) {
+ ret = -ENODEV;
+ goto out;
+ }
if (power_supply_is_system_supplied() > 0)
- dell_send_request(&buffer, 0, 2);
+ dell_send_request(buffer, 0, 2);
else
- dell_send_request(&buffer, 0, 1);
+ dell_send_request(buffer, 0, 1);
- return buffer.output[1];
+out:
+ release_buffer();
+ if (ret)
+ return ret;
+ return buffer->output[1];
}
static struct backlight_ops dell_ops = {
@@ -427,7 +458,6 @@ bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
static int __init dell_init(void)
{
- struct calling_interface_buffer buffer;
int max_intensity = 0;
int ret;
@@ -453,6 +483,17 @@ static int __init dell_init(void)
if (ret)
goto fail_platform_device2;
+ /*
+ * Allocate buffer below 4GB for SMI data--only 32-bit physical addr
+ * is passed to SMI handler.
+ */
+ bufferpage = alloc_page(GFP_KERNEL | GFP_DMA32);
+
+ if (!bufferpage)
+ goto fail_buffer;
+ buffer = page_address(bufferpage);
+ mutex_init(&buffer_mutex);
+
ret = dell_setup_rfkill();
if (ret) {
@@ -475,13 +516,13 @@ static int __init dell_init(void)
return 0;
#endif
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
-
- if (buffer.input[0] != -1) {
- dell_send_request(&buffer, 0, 2);
- max_intensity = buffer.output[3];
+ get_buffer();
+ buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN);
+ if (buffer->input[0] != -1) {
+ dell_send_request(buffer, 0, 2);
+ max_intensity = buffer->output[3];
}
+ release_buffer();
if (max_intensity) {
dell_backlight_device = backlight_device_register(
@@ -508,6 +549,8 @@ fail_backlight:
fail_filter:
dell_cleanup_rfkill();
fail_rfkill:
+ free_page((unsigned long)bufferpage);
+fail_buffer:
platform_device_del(platform_device);
fail_platform_device2:
platform_device_put(platform_device);
@@ -529,6 +572,7 @@ static void __exit dell_exit(void)
platform_driver_unregister(&platform_driver);
}
kfree(da_tokens);
+ free_page((unsigned long)buffer);
}
module_init(dell_init);
--
1.6.6.1
next prev parent reply other threads:[~2010-02-26 15:20 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-26 15:18 [GIT PULL] x86 platform drivers tree Matthew Garrett
2010-02-26 15:18 ` [PATCH 01/14] MAINTAINERS: update drivers/platform/x86 information Matthew Garrett
2010-02-26 16:18 ` Thadeu Lima de Souza Cascardo
2010-02-26 16:39 ` Anisse Astier
2010-02-26 16:44 ` Anisse Astier
2010-02-26 23:58 ` Henrique de Moraes Holschuh
2010-02-26 21:53 ` Corentin Chary
2010-03-01 17:59 ` Len Brown
2010-03-01 18:02 ` Matthew Garrett
2010-03-01 18:23 ` Len Brown
2010-02-26 23:51 ` Peter Feuerer
2010-02-27 3:42 ` Jonathan Woithe
2010-02-27 4:39 ` Harald Welte
2010-02-26 15:18 ` [PATCH 02/14] compal-laptop: Add support for known Compal made Dell laptops Matthew Garrett
2010-02-26 15:18 ` [PATCH 03/14] compal-laptop: Replace sysfs support with rfkill support Matthew Garrett
2010-02-26 15:18 ` [PATCH 04/14] dell-laptop: Update rfkill state on kill switch Matthew Garrett
2010-02-27 8:06 ` Dmitry Torokhov
2010-02-26 15:18 ` [PATCH 05/14] dell-laptop: Fix platform device unregistration Matthew Garrett
2010-02-27 8:09 ` Dmitry Torokhov
2010-02-26 15:18 ` [PATCH 06/14] dell-laptop: Fix small memory leak Matthew Garrett
2010-02-26 15:18 ` [PATCH 07/14] dell-laptop: Block software state changes when rfkill hard blocked Matthew Garrett
2010-02-26 15:18 ` [PATCH 08/14] dell-laptop: Blacklist machines not supporting dell-laptop Matthew Garrett
2010-02-26 15:18 ` Matthew Garrett [this message]
2010-02-27 8:11 ` [PATCH 09/14] dell-laptop: Use buffer with 32-bit physical address Dmitry Torokhov
2010-02-26 15:18 ` [PATCH 10/14] dell-laptop: Pay attention to which devices the hardware switch controls Matthew Garrett
2010-02-26 15:18 ` [PATCH 11/14] classmate-laptop: use a single MODULE_DEVICE_TABLE to get correct aliases Matthew Garrett
2010-02-26 15:18 ` [PATCH 12/14] dell-laptop: Add another Dell laptop to the DMI whitelist Matthew Garrett
2010-02-26 15:18 ` [PATCH 13/14] hp-wmi: Add support for tablet rotation key Matthew Garrett
2010-02-27 8:12 ` Dmitry Torokhov
2010-02-26 15:18 ` [PATCH 14/14] toshiba_acpi: Add full hotkey support Matthew Garrett
2010-02-27 0:07 ` [GIT PULL] x86 platform drivers tree Henrique de Moraes Holschuh
2010-03-01 14:45 ` Matthew Garrett
2010-02-28 19:59 ` tip: origin tree build failure Ingo Molnar
2010-03-02 13:56 ` [PATCH] compal-laptop: Make it depend on CONFIG_RFKILL Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1267197527-18062-10-git-send-email-mjg@redhat.com \
--to=mjg@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stuart_hayes@dell.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®