mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] arm64: dts: qcom: glymur-crd: Enable WLAN and Bluetooth
@ 2026-03-09 17:33 Abel Vesa
  2026-03-09 19:40 ` Dmitry Baryshkov
  2026-03-10  7:27 ` Zijun Hu
  0 siblings, 2 replies; 5+ messages in thread
From: Abel Vesa @ 2026-03-09 17:33 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley
  Cc: Dmitry Baryshkov, Zijun Hu, linux-arm-msm, devicetree,
	linux-kernel, Abel Vesa

The Glymur CRD features a WCN7850 WLAN and Bluetooth combo chip.

So describe both the 0.9V and the 3.3V regulators, then WCN7850 PMU and
the PCIe WLAN and the UART Bluetooth nodes.

This enables WLAN and Bluetooth functionality on the CRD.

Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dts | 119 ++++++++++++++++++++++++++++++--
 1 file changed, 113 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
index 0de7d35e1148..bcee513e477b 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
@@ -190,17 +190,27 @@ vreg_nvmesec: regulator-nvmesec {
 		regulator-boot-on;
 	};
 
-	vreg_wlan: regulator-wlan {
+	vreg_wcn_0p95: regulator-wcn-0p95 {
 		compatible = "regulator-fixed";
 
-		regulator-name = "VREG_WLAN_3P3";
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
 		gpio = <&tlmm 94 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
-		pinctrl-0 = <&wlan_reg_en>;
+		pinctrl-0 = <&wcn_sw_en>;
 		pinctrl-names = "default";
 
 		regulator-boot-on;
@@ -219,6 +229,66 @@ vreg_wwan: regulator-wwan {
 		pinctrl-0 = <&wwan_reg_en>;
 		pinctrl-names = "default";
 	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_e0_1p8>;
+		vddio1p2-supply = <&vreg_l18b_e0_1p2>;
+		vddaon-supply = <&vreg_l15b_e0_1p8>;
+		vdddig-supply = <&vreg_l15b_e0_1p8>;
+		vddrfa1p2-supply = <&vreg_l15b_e0_1p8>;
+		vddrfa1p8-supply = <&vreg_l15b_e0_1p8>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -616,8 +686,6 @@ &pcie3b_port0 {
 };
 
 &pcie4 {
-	vddpe-3v3-supply = <&vreg_wlan>;
-
 	pinctrl-0 = <&pcie4_default>;
 	pinctrl-names = "default";
 
@@ -634,6 +702,21 @@ &pcie4_phy {
 &pcie4_port0 {
 	reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
 };
 
 &pcie5 {
@@ -873,7 +956,14 @@ wake-n-pins {
 		};
 	};
 
-	wlan_reg_en: wlan-reg-en-state {
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
 		pins = "gpio94";
 		function = "gpio";
 		drive-strength = <2>;
@@ -888,6 +978,23 @@ wwan_reg_en: wwan-reg-en-state {
 	};
 };
 
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
 &usb_0 {
 	dr_mode = "host";
 

---
base-commit: 5138081b838d92e1bfcddc7b72b9215cca6e83f0
change-id: 20260309-glymur-dts-crd-enable-bt-wlan-db90c414ebaa
prerequisite-change-id: 20260109-dts-qcom-glymur-add-usb-support-617b6d9d032c:v4
prerequisite-patch-id: df42484b224c01014637ec5a8f56bab459890557
prerequisite-patch-id: d986d8d948eaf7b80028b2244750dc7aff7de307
prerequisite-patch-id: 7ec5f802a334d96421d8f95d4d9e9773655cc947
prerequisite-patch-id: 8d9e016b49979fa817cf9eab70b809fdb9d4656f
prerequisite-change-id: 20260109-dts-qcom-glymur-crd-add-edp-03f0adde9750:v4
prerequisite-patch-id: df42484b224c01014637ec5a8f56bab459890557
prerequisite-patch-id: d986d8d948eaf7b80028b2244750dc7aff7de307
prerequisite-patch-id: 7ec5f802a334d96421d8f95d4d9e9773655cc947
prerequisite-patch-id: 8d9e016b49979fa817cf9eab70b809fdb9d4656f
prerequisite-patch-id: 6a291fd702870ca28d64439313d498593996b741
prerequisite-patch-id: c96958ab5c5605fb9577645ac5bfe5912cdfebfe
prerequisite-patch-id: bfa283218723a48e54fcd842484b004c877339b7
prerequisite-patch-id: 346f2db0933c551a039f63b945f989a5c8320657
prerequisite-patch-id: 919020405b70d588fa4356a5cbfb44e67006102e

Best regards,
--  
Abel Vesa <abel.vesa@oss.qualcomm.com>


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] arm64: dts: qcom: glymur-crd: Enable WLAN and Bluetooth
  2026-03-09 17:33 [PATCH] arm64: dts: qcom: glymur-crd: Enable WLAN and Bluetooth Abel Vesa
@ 2026-03-09 19:40 ` Dmitry Baryshkov
  2026-03-12 13:05   ` Abel Vesa
  2026-03-10  7:27 ` Zijun Hu
  1 sibling, 1 reply; 5+ messages in thread
From: Dmitry Baryshkov @ 2026-03-09 19:40 UTC (permalink / raw)
  To: Abel Vesa
  Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Zijun Hu, linux-arm-msm, devicetree, linux-kernel

On Mon, Mar 09, 2026 at 07:33:25PM +0200, Abel Vesa wrote:
> The Glymur CRD features a WCN7850 WLAN and Bluetooth combo chip.
> 
> So describe both the 0.9V and the 3.3V regulators, then WCN7850 PMU and
> the PCIe WLAN and the UART Bluetooth nodes.
> 
> This enables WLAN and Bluetooth functionality on the CRD.
> 
> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/glymur-crd.dts | 119 ++++++++++++++++++++++++++++++--
>  1 file changed, 113 insertions(+), 6 deletions(-)
> 

Is it directly wired to the board or is it connected via the M.2 slot?

-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] arm64: dts: qcom: glymur-crd: Enable WLAN and Bluetooth
  2026-03-09 17:33 [PATCH] arm64: dts: qcom: glymur-crd: Enable WLAN and Bluetooth Abel Vesa
  2026-03-09 19:40 ` Dmitry Baryshkov
@ 2026-03-10  7:27 ` Zijun Hu
  2026-03-12 13:07   ` Abel Vesa
  1 sibling, 1 reply; 5+ messages in thread
From: Zijun Hu @ 2026-03-10  7:27 UTC (permalink / raw)
  To: Abel Vesa, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley
  Cc: Dmitry Baryshkov, linux-arm-msm, devicetree, linux-kernel

On 3/10/2026 1:33 AM, Abel Vesa wrote:
> The Glymur CRD features a WCN7850 WLAN and Bluetooth combo chip.

a WCN7850 M.2 WiFi bluetooth combo card.

> 
> So describe both the 0.9V and the 3.3V regulators, then WCN7850 PMU and
> the PCIe WLAN and the UART Bluetooth nodes.
> 
> This enables WLAN and Bluetooth functionality on the CRD.
> 
> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/glymur-crd.dts | 119 ++++++++++++++++++++++++++++++--
>  1 file changed, 113 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
> index 0de7d35e1148..bcee513e477b 100644
> --- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
> @@ -190,17 +190,27 @@ vreg_nvmesec: regulator-nvmesec {
>  		regulator-boot-on;
>  	};
>  
> -	vreg_wlan: regulator-wlan {
> +	vreg_wcn_0p95: regulator-wcn-0p95 {
>  		compatible = "regulator-fixed";
>  
> -		regulator-name = "VREG_WLAN_3P3";
> +		regulator-name = "VREG_WCN_0P95";
> +		regulator-min-microvolt = <950000>;
> +		regulator-max-microvolt = <950000>;
> +
> +		vin-supply = <&vreg_wcn_3p3>;
> +	};
> +
> +	vreg_wcn_3p3: regulator-wcn-3p3 {
> +		compatible = "regulator-fixed";
> +
> +		regulator-name = "VREG_WCN_3P3";
>  		regulator-min-microvolt = <3300000>;
>  		regulator-max-microvolt = <3300000>;
>  
>  		gpio = <&tlmm 94 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  
> -		pinctrl-0 = <&wlan_reg_en>;
> +		pinctrl-0 = <&wcn_sw_en>;
>  		pinctrl-names = "default";
>  
>  		regulator-boot-on;
> @@ -219,6 +229,66 @@ vreg_wwan: regulator-wwan {
>  		pinctrl-0 = <&wwan_reg_en>;
>  		pinctrl-names = "default";
>  	};
> +
> +	wcn7850-pmu {
> +		compatible = "qcom,wcn7850-pmu";
> +
> +		vdd-supply = <&vreg_wcn_0p95>;
> +		vddio-supply = <&vreg_l15b_e0_1p8>;
> +		vddio1p2-supply = <&vreg_l18b_e0_1p2>;

may remove vddio1p2-supply since it does NOT use 1.2v IO power supply

> +		vddaon-supply = <&vreg_l15b_e0_1p8>;
> +		vdddig-supply = <&vreg_l15b_e0_1p8>;
> +		vddrfa1p2-supply = <&vreg_l15b_e0_1p8>;
> +		vddrfa1p8-supply = <&vreg_l15b_e0_1p8>;
> +
> +		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
> +		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
> +
> +		pinctrl-0 = <&wcn_wlan_bt_en>;
> +		pinctrl-names = "default";
> +
> +		regulators {
> +			vreg_pmu_rfa_cmn: ldo0 {
> +				regulator-name = "vreg_pmu_rfa_cmn";
> +			};
> +
> +			vreg_pmu_aon_0p59: ldo1 {
> +				regulator-name = "vreg_pmu_aon_0p59";
> +			};
> +
> +			vreg_pmu_wlcx_0p8: ldo2 {
> +				regulator-name = "vreg_pmu_wlcx_0p8";
> +			};
> +
> +			vreg_pmu_wlmx_0p85: ldo3 {
> +				regulator-name = "vreg_pmu_wlmx_0p85";
> +			};
> +
> +			vreg_pmu_btcmx_0p85: ldo4 {
> +				regulator-name = "vreg_pmu_btcmx_0p85";
> +			};
> +
> +			vreg_pmu_rfa_0p8: ldo5 {
> +				regulator-name = "vreg_pmu_rfa_0p8";
> +			};
> +
> +			vreg_pmu_rfa_1p2: ldo6 {
> +				regulator-name = "vreg_pmu_rfa_1p2";
> +			};
> +
> +			vreg_pmu_rfa_1p8: ldo7 {
> +				regulator-name = "vreg_pmu_rfa_1p8";
> +			};
> +
> +			vreg_pmu_pcie_0p9: ldo8 {
> +				regulator-name = "vreg_pmu_pcie_0p9";
> +			};
> +
> +			vreg_pmu_pcie_1p8: ldo9 {
> +				regulator-name = "vreg_pmu_pcie_1p8";
> +			};
> +		};
> +	};
>  };
>  
>  &apps_rsc {
> @@ -616,8 +686,6 @@ &pcie3b_port0 {
>  };
>  
>  &pcie4 {
> -	vddpe-3v3-supply = <&vreg_wlan>;
> -

Ack.

>  	pinctrl-0 = <&pcie4_default>;
>  	pinctrl-names = "default";
>  
> @@ -634,6 +702,21 @@ &pcie4_phy {
>  &pcie4_port0 {
>  	reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
>  	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
> +
> +	wifi@0 {
> +		compatible = "pci17cb,1107";
> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> +		vddaon-supply = <&vreg_pmu_aon_0p59>;
> +		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> +		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> +		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> +		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> +		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> +		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
> +		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> +		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> +	};
>  };
>  
>  &pcie5 {
> @@ -873,7 +956,14 @@ wake-n-pins {
>  		};
>  	};
>  
> -	wlan_reg_en: wlan-reg-en-state {
> +	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
> +		pins = "gpio116", "gpio117";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +
> +	wcn_sw_en: wcn-sw-en-state {
>  		pins = "gpio94";
>  		function = "gpio";
>  		drive-strength = <2>;
> @@ -888,6 +978,23 @@ wwan_reg_en: wwan-reg-en-state {
>  	};
>  };
>  
> +&uart14 {
> +	status = "okay";
> +
> +	bluetooth {
> +		compatible = "qcom,wcn7850-bt";
> +		max-speed = <3200000>;
> +
> +		vddaon-supply = <&vreg_pmu_aon_0p59>;
> +		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> +		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> +		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> +		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> +		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> +		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
> +	};
> +};
> +
>  &usb_0 {
>  	dr_mode = "host";
>  
> 
> ---
> base-commit: 5138081b838d92e1bfcddc7b72b9215cca6e83f0
> change-id: 20260309-glymur-dts-crd-enable-bt-wlan-db90c414ebaa
> prerequisite-change-id: 20260109-dts-qcom-glymur-add-usb-support-617b6d9d032c:v4
> prerequisite-patch-id: df42484b224c01014637ec5a8f56bab459890557
> prerequisite-patch-id: d986d8d948eaf7b80028b2244750dc7aff7de307
> prerequisite-patch-id: 7ec5f802a334d96421d8f95d4d9e9773655cc947
> prerequisite-patch-id: 8d9e016b49979fa817cf9eab70b809fdb9d4656f
> prerequisite-change-id: 20260109-dts-qcom-glymur-crd-add-edp-03f0adde9750:v4
> prerequisite-patch-id: df42484b224c01014637ec5a8f56bab459890557
> prerequisite-patch-id: d986d8d948eaf7b80028b2244750dc7aff7de307
> prerequisite-patch-id: 7ec5f802a334d96421d8f95d4d9e9773655cc947
> prerequisite-patch-id: 8d9e016b49979fa817cf9eab70b809fdb9d4656f
> prerequisite-patch-id: 6a291fd702870ca28d64439313d498593996b741
> prerequisite-patch-id: c96958ab5c5605fb9577645ac5bfe5912cdfebfe
> prerequisite-patch-id: bfa283218723a48e54fcd842484b004c877339b7
> prerequisite-patch-id: 346f2db0933c551a039f63b945f989a5c8320657
> prerequisite-patch-id: 919020405b70d588fa4356a5cbfb44e67006102e
> 
> Best regards,
> --  
> Abel Vesa <abel.vesa@oss.qualcomm.com>
> 


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] arm64: dts: qcom: glymur-crd: Enable WLAN and Bluetooth
  2026-03-09 19:40 ` Dmitry Baryshkov
@ 2026-03-12 13:05   ` Abel Vesa
  0 siblings, 0 replies; 5+ messages in thread
From: Abel Vesa @ 2026-03-12 13:05 UTC (permalink / raw)
  To: Dmitry Baryshkov
  Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Zijun Hu, linux-arm-msm, devicetree, linux-kernel

On 26-03-09 21:40:20, Dmitry Baryshkov wrote:
> On Mon, Mar 09, 2026 at 07:33:25PM +0200, Abel Vesa wrote:
> > The Glymur CRD features a WCN7850 WLAN and Bluetooth combo chip.
> > 
> > So describe both the 0.9V and the 3.3V regulators, then WCN7850 PMU and
> > the PCIe WLAN and the UART Bluetooth nodes.
> > 
> > This enables WLAN and Bluetooth functionality on the CRD.
> > 
> > Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> > ---
> >  arch/arm64/boot/dts/qcom/glymur-crd.dts | 119 ++++++++++++++++++++++++++++++--
> >  1 file changed, 113 insertions(+), 6 deletions(-)
> > 
> 
> Is it directly wired to the board or is it connected via the M.2 slot?

Schematics say it's via M.2 slot.

Will rework and respin.

Thanks for reviewing.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] arm64: dts: qcom: glymur-crd: Enable WLAN and Bluetooth
  2026-03-10  7:27 ` Zijun Hu
@ 2026-03-12 13:07   ` Abel Vesa
  0 siblings, 0 replies; 5+ messages in thread
From: Abel Vesa @ 2026-03-12 13:07 UTC (permalink / raw)
  To: Zijun Hu
  Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Dmitry Baryshkov, linux-arm-msm, devicetree,
	linux-kernel

On 26-03-10 15:27:25, Zijun Hu wrote:
> On 3/10/2026 1:33 AM, Abel Vesa wrote:
> > The Glymur CRD features a WCN7850 WLAN and Bluetooth combo chip.
> 
> a WCN7850 M.2 WiFi bluetooth combo card.

Will fix.

> 
> > 
> > So describe both the 0.9V and the 3.3V regulators, then WCN7850 PMU and
> > the PCIe WLAN and the UART Bluetooth nodes.
> > 
> > This enables WLAN and Bluetooth functionality on the CRD.
> > 
> > Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> > ---
> >  arch/arm64/boot/dts/qcom/glymur-crd.dts | 119 ++++++++++++++++++++++++++++++--
> >  1 file changed, 113 insertions(+), 6 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
> > index 0de7d35e1148..bcee513e477b 100644
> > --- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
> > +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
> > @@ -190,17 +190,27 @@ vreg_nvmesec: regulator-nvmesec {
> >  		regulator-boot-on;
> >  	};
> >  

[...]

> > +
> > +	wcn7850-pmu {
> > +		compatible = "qcom,wcn7850-pmu";
> > +
> > +		vdd-supply = <&vreg_wcn_0p95>;
> > +		vddio-supply = <&vreg_l15b_e0_1p8>;
> > +		vddio1p2-supply = <&vreg_l18b_e0_1p2>;
> 
> may remove vddio1p2-supply since it does NOT use 1.2v IO power supply

Will drop.

Thanks for reviewing.

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2026-03-12 13:07 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-03-09 17:33 [PATCH] arm64: dts: qcom: glymur-crd: Enable WLAN and Bluetooth Abel Vesa
2026-03-09 19:40 ` Dmitry Baryshkov
2026-03-12 13:05   ` Abel Vesa
2026-03-10  7:27 ` Zijun Hu
2026-03-12 13:07   ` Abel Vesa

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®