[BUG] cpuset: empty sched domain with isolcpus=domain, panic at CPU offline

[BUG] cpuset: empty sched domain with isolcpus=domain, panic at CPU offline

[Mathieu Desnoyers]

Hi,

With isolcpus=domain, cpuset partitions can take all the housekeeping
CPUs. The top cpuset then gets an empty sched domain. In a VM, this
gave a WARNING in build_sched_domains(), then a panic at the next CPU
offline. I hit it once, while testing a SCHED_DEADLINE series [1]. The
analysis below is from reading the code after that panic. A proposed
fix follows the scissors line.

The code involved is the same in v7.4-rc1 and in tip sched/urgent
(006991aa8997). The series does not change it.

Trigger
=======

Boot 5 CPUs with isolcpus=domain,0,1. Then, with cgroup v2:

  cd /sys/fs/cgroup
  echo +cpuset > cgroup.subtree_control
  mkdir P Q
  echo 4 > P/cpuset.cpus
  echo root > P/cpuset.cpus.partition
  echo 2-3 > Q/cpuset.cpus
  echo root > Q/cpuset.cpus.partition          # WARNING
  echo 0 > /sys/devices/system/cpu/cpu2/online  # panic

The test that hit it made these writes. It also ran a deadline task in
Q, which the analysis does not need. After the writes, the top cpuset
keeps only CPUs 0 and 1, which are isolated.

Log
===

  WARNING: kernel/sched/topology.c:3111 at build_sched_domains+0x1321/0x1830, CPU#0: orig/91
  CPU: 0 UID: 0 PID: 91 Comm: orig Not tainted 7.4.0-rc1-00300-gc36e8c1d51c9 #98 PREEMPT(lazy)
  Call Trace:
   partition_sched_domains+0x331/0x990
   cpuset_update_sd_hk_unlock+0x76/0x80
   cpuset_partition_write+0x9e/0xe0
   kernfs_fop_write_iter+0x14d/0x210
   vfs_write+0x252/0x550
   ksys_write+0x6c/0xe0
   do_syscall_64+0x109/0x5d0
  [...]
  BUG: unable to handle page fault for address: 0000000083cf6513
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  Oops: Oops: 0000 [#1] SMP NOPTI
  CPU: 2 UID: 0 PID: 26 Comm: cpuhp/2 Tainted: G        W           7.4.0-rc1-00300-gc36e8c1d51c9 #98 PREEMPT(lazy)
  RIP: 0010:partition_sched_domains+0x5ee/0x990
  RAX: 0000000083cf58c3 RBX: 0000000000000003 RCX: ff11000004f60b58
  R10: 0000000000000200 R11: 0000000000000004 R12: 0000000000000040
  Call Trace:
   cpuset_update_active_cpus+0x512/0xb00
   sched_cpu_deactivate+0x1f3/0x300
   cpuhp_invoke_callback+0x1b4/0x780
   cpuhp_thread_fun+0x183/0x260
   smpboot_thread_fn+0x143/0x300
   kthread+0xfe/0x130
   ret_from_fork+0x22a/0x330
  Kernel panic - not syncing: Fatal exception

Analysis
========

The top cpuset may hold CPUs isolated at boot. generate_sched_domains()
keeps a partition root if its effective_cpus is not empty. For the top
cpuset, it then builds the domain from effective_cpus without these
CPUs:

	if ((cp->partition_root_state == PRS_ROOT) &&
	    !cpumask_empty(cp->effective_cpus))
		csa[ndoms++] = cp;
	[...]
	if (!csa || csa[i] == &top_cpuset)
		cpumask_and(doms[i], top_cpuset.effective_cpus,
			    housekeeping_cpumask(HK_TYPE_DOMAIN_BOOT));

Here effective_cpus is 0-1, so the domain is empty.
build_sched_domains() warns and builds nothing. But
partition_sched_domains_locked() still records the empty mask in
doms_cur.

At the CPU offline, cpuset passes the empty domain again. It matches
the empty one in doms_cur. The reuse branch then reads the runqueue of
the first CPU of the mask:

	int cpu = cpumask_first(doms_cur[j]);

	guard(rcu)();
	sd = rcu_dereference(cpu_rq(cpu)->sd);

On an empty mask, cpumask_first() returns NR_CPUS when NR_CPUS is at
most BITS_PER_LONG. This kernel has NR_CPUS=64. R12 = 0x40 is that
index into __per_cpu_offset[], one entry past its end. The load of
rq->sd then faults.

The partition checks do not refuse Q. tasks_nocpu_error() tests the
effective_cpus of the top cpuset, which still holds CPUs 0 and 1.
prstate_housekeeping_conflict() keeps boot time isolated CPUs out of
root partitions. Nothing asks the top cpuset to keep a housekeeping
CPU.

Versions:
- The empty domain comes from 9b496a8bbed9 ("cgroup/cpuset: Prevent
  leakage of isolated CPUs into sched domains"), in v6.13.
- The reuse branch comes from a7660ce1590f ("sched/cache: Fix
  has_multi_llcs iff at least one partition has multiple LLCs"), in
  v7.2.

From v6.13 to v7.1, a similar read would happen elsewhere. This is from
reading only:
- detach_destroy_domains() reads per_cpu() of cpumask_any() of the
  mask, when the empty domain goes away.
- With CONFIG_ENERGY_MODEL, build_perf_domains() reads
  cpu_rq(cpumask_first()) of the mask at its first build.

Where to fix
============

Commit cd1cb3350561 ("sched/topology: Don't try to build empty sched
domains") fixed a crash of this kind in 2019. It made
generate_sched_domains() skip empty masks. Its changelog says that the
scheduler should not have to check cpumask_first() against nr_cpu_ids.
So the patch below fixes cpuset. It keeps a partition root only if its
effective_cpus holds a housekeeping CPU.

Two questions:
- Should cpuset refuse a partition that leaves the top cpuset without
  a housekeeping CPU? The patch keeps the current behaviour. The
  partition is valid. The tasks of the top cpuset run on the isolated
  CPUs.
- Should the scheduler also skip empty masks? The reuse branch, the
  perf domain code and detach_destroy_domains() all take a CPU from
  the mask.

Testing
=======

With the patch on tip sched/urgent (006991aa8997), in a VM with
5 CPUs:
- isolcpus=domain,0,1 and the sequence above. There is no WARNING.
  All CPU offlines and onlines complete. Q gets the domain 2-3, and the
  top cpuset gets none. The top cpuset gets the domain 2-3 back when Q
  becomes a member again.
- The same boot, with P as an isolated partition. Q is a root
  partition first, then isolated too. With both isolated, no partition
  root has a housekeeping CPU. The scheduler then gets no domain, and
  CPU hotplug works. Making Q isolated also warns in
  cpuset_update_sd_hk_unlock(). That is a separate problem, which I
  report separately. The patch does not touch that path.
- No isolcpus, and the same sequence. There is no WARNING. The top
  cpuset keeps its domain 0-1.

test_cpuset_prs.sh passes on 9 CPUs. It also passes on 10 CPUs with
isolcpus=domain,9. I did not run the crash sequence again on a kernel
without the fix.

The analysis and the patch were written by an LLM coding assistant
under my direction and review.

Thanks,

Mathieu

[1] https://lore.kernel.org/all/20261107014451.1487825-1-mathieu.desnoyers@efficios.com/

-- >8 --
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Subject: cgroup/cpuset: Do not build an empty sched domain for the top cpuset

The scheduler expects each sched domain from cpuset to hold at least
one CPU. Commit cd1cb3350561 ("sched/topology: Don't try to build empty
sched domains") made generate_sched_domains() skip a cpuset with an
empty effective_cpus. It also made build_sched_domains() warn on an
empty mask.

The top cpuset may hold CPUs isolated at boot. Commit 9b496a8bbed9
("cgroup/cpuset: Prevent leakage of isolated CPUs into sched domains")
removes them from its sched domain. The check for an empty domain was
not updated. It still tests effective_cpus, which includes the isolated
CPUs.

So partitions that take all the housekeeping CPUs leave the top cpuset
with an empty domain. For example, boot 5 CPUs with isolcpus=domain,0,1.
Then make CPUs 2-3 and 4 root partitions. build_sched_domains() warns.
The scheduler still records the empty mask as a current domain. At the
next rebuild, the new empty domain matches it.
partition_sched_domains_locked() then calls cpu_rq() on cpumask_first()
of the empty mask, which is not a valid CPU. In a VM, the next CPU
offline panicked there.

Fix this by keeping a partition root only if its effective_cpus holds a
housekeeping CPU. This tests the mask that the top cpuset gets.
prstate_housekeeping_conflict() keeps boot time isolated CPUs out of
the other partition roots. So nothing changes for them.

This change was developed with assistance from an LLM.

Fixes: 9b496a8bbed9 ("cgroup/cpuset: Prevent leakage of isolated CPUs into sched domains")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
---
 kernel/cgroup/cpuset.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index 3219f927c35e..426c98cf4a08 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -894,10 +894,13 @@ static int generate_sched_domains(cpumask_var_t **domains,
 	cpuset_for_each_descendant_pre(cp, pos_css, &top_cpuset) {
 		/*
 		 * Only valid partition roots that are not isolated and with
-		 * non-empty effective_cpus will be saved into csa[].
+		 * housekeeping CPUs in effective_cpus will be saved into csa[].
+		 * The top cpuset may keep only boot time isolated CPUs. It then
+		 * gets no sched domain.
 		 */
 		if ((cp->partition_root_state == PRS_ROOT) &&
-		    !cpumask_empty(cp->effective_cpus))
+		    cpumask_intersects(cp->effective_cpus,
+				       housekeeping_cpumask(HK_TYPE_DOMAIN_BOOT)))
 			csa[ndoms++] = cp;
 
 		/*

Re: [BUG] cpuset: empty sched domain with isolcpus=domain, panic at CPU offline

[Waiman Long]

On 11/8/26 9:57 AM, Mathieu Desnoyers wrote:
> Hi,
>
> With isolcpus=domain, cpuset partitions can take all the housekeeping
> CPUs. The top cpuset then gets an empty sched domain. In a VM, this
> gave a WARNING in build_sched_domains(), then a panic at the next CPU
> offline. I hit it once, while testing a SCHED_DEADLINE series [1]. The
> analysis below is from reading the code after that panic. A proposed
> fix follows the scissors line.
>
> The code involved is the same in v7.4-rc1 and in tip sched/urgent
> (006991aa8997). The series does not change it.
>
> Trigger
> =======
>
> Boot 5 CPUs with isolcpus=domain,0,1. Then, with cgroup v2:
>
>    cd /sys/fs/cgroup
>    echo +cpuset > cgroup.subtree_control
>    mkdir P Q
>    echo 4 > P/cpuset.cpus
>    echo root > P/cpuset.cpus.partition
>    echo 2-3 > Q/cpuset.cpus
>    echo root > Q/cpuset.cpus.partition          # WARNING
>    echo 0 > /sys/devices/system/cpu/cpu2/online  # panic
>
> The test that hit it made these writes. It also ran a deadline task in
> Q, which the analysis does not need. After the writes, the top cpuset
> keeps only CPUs 0 and 1, which are isolated.
>
> Log
> ===
>
>    WARNING: kernel/sched/topology.c:3111 at build_sched_domains+0x1321/0x1830, CPU#0: orig/91
>    CPU: 0 UID: 0 PID: 91 Comm: orig Not tainted 7.4.0-rc1-00300-gc36e8c1d51c9 #98 PREEMPT(lazy)
>    Call Trace:
>     partition_sched_domains+0x331/0x990
>     cpuset_update_sd_hk_unlock+0x76/0x80
>     cpuset_partition_write+0x9e/0xe0
>     kernfs_fop_write_iter+0x14d/0x210
>     vfs_write+0x252/0x550
>     ksys_write+0x6c/0xe0
>     do_syscall_64+0x109/0x5d0
>    [...]
>    BUG: unable to handle page fault for address: 0000000083cf6513
>    #PF: supervisor read access in kernel mode
>    #PF: error_code(0x0000) - not-present page
>    Oops: Oops: 0000 [#1] SMP NOPTI
>    CPU: 2 UID: 0 PID: 26 Comm: cpuhp/2 Tainted: G        W           7.4.0-rc1-00300-gc36e8c1d51c9 #98 PREEMPT(lazy)
>    RIP: 0010:partition_sched_domains+0x5ee/0x990
>    RAX: 0000000083cf58c3 RBX: 0000000000000003 RCX: ff11000004f60b58
>    R10: 0000000000000200 R11: 0000000000000004 R12: 0000000000000040
>    Call Trace:
>     cpuset_update_active_cpus+0x512/0xb00
>     sched_cpu_deactivate+0x1f3/0x300
>     cpuhp_invoke_callback+0x1b4/0x780
>     cpuhp_thread_fun+0x183/0x260
>     smpboot_thread_fn+0x143/0x300
>     kthread+0xfe/0x130
>     ret_from_fork+0x22a/0x330
>    Kernel panic - not syncing: Fatal exception
>
> Analysis
> ========
>
> The top cpuset may hold CPUs isolated at boot. generate_sched_domains()
> keeps a partition root if its effective_cpus is not empty. For the top
> cpuset, it then builds the domain from effective_cpus without these
> CPUs:
>
> 	if ((cp->partition_root_state == PRS_ROOT) &&
> 	    !cpumask_empty(cp->effective_cpus))
> 		csa[ndoms++] = cp;
> 	[...]
> 	if (!csa || csa[i] == &top_cpuset)
> 		cpumask_and(doms[i], top_cpuset.effective_cpus,
> 			    housekeeping_cpumask(HK_TYPE_DOMAIN_BOOT));
>
> Here effective_cpus is 0-1, so the domain is empty.
> build_sched_domains() warns and builds nothing. But
> partition_sched_domains_locked() still records the empty mask in
> doms_cur.

This is a known problem and we are working to address this in the cpuset 
code to make sure that there is at least one online domain housekeeping 
CPUs for the top_cpuset.

>
> At the CPU offline, cpuset passes the empty domain again. It matches
> the empty one in doms_cur. The reuse branch then reads the runqueue of
> the first CPU of the mask:
>
> 	int cpu = cpumask_first(doms_cur[j]);
>
> 	guard(rcu)();
> 	sd = rcu_dereference(cpu_rq(cpu)->sd);
>
> On an empty mask, cpumask_first() returns NR_CPUS when NR_CPUS is at
> most BITS_PER_LONG. This kernel has NR_CPUS=64. R12 = 0x40 is that
> index into __per_cpu_offset[], one entry past its end. The load of
> rq->sd then faults.
>
> The partition checks do not refuse Q. tasks_nocpu_error() tests the
> effective_cpus of the top cpuset, which still holds CPUs 0 and 1.
> prstate_housekeeping_conflict() keeps boot time isolated CPUs out of
> root partitions. Nothing asks the top cpuset to keep a housekeeping
> CPU.
>
> Versions:
> - The empty domain comes from 9b496a8bbed9 ("cgroup/cpuset: Prevent
>    leakage of isolated CPUs into sched domains"), in v6.13.
> - The reuse branch comes from a7660ce1590f ("sched/cache: Fix
>    has_multi_llcs iff at least one partition has multiple LLCs"), in
>    v7.2.
>
>  From v6.13 to v7.1, a similar read would happen elsewhere. This is from
> reading only:
> - detach_destroy_domains() reads per_cpu() of cpumask_any() of the
>    mask, when the empty domain goes away.
> - With CONFIG_ENERGY_MODEL, build_perf_domains() reads
>    cpu_rq(cpumask_first()) of the mask at its first build.
>
> Where to fix
> ============
>
> Commit cd1cb3350561 ("sched/topology: Don't try to build empty sched
> domains") fixed a crash of this kind in 2019. It made
> generate_sched_domains() skip empty masks. Its changelog says that the
> scheduler should not have to check cpumask_first() against nr_cpu_ids.
> So the patch below fixes cpuset. It keeps a partition root only if its
> effective_cpus holds a housekeeping CPU.
>
> Two questions:
> - Should cpuset refuse a partition that leaves the top cpuset without
>    a housekeeping CPU? The patch keeps the current behaviour. The
>    partition is valid. The tasks of the top cpuset run on the isolated
>    CPUs.

Yes, we are going to add the check to make sure that there will be at 
least one housekeeping CPU left for the top_cpuset sched domain.

See 
https://lore.kernel.org/lkml/20261105130344.664336-1-guopeng.zhang@linux.dev/

> - Should the scheduler also skip empty masks? The reuse branch, the
>    perf domain code and detach_destroy_domains() all take a CPU from
>    the mask.
>
> Testing1
> =======
>
> With the patch on tip sched/urgent (006991aa8997), in a VM with
> 5 CPUs:
> - isolcpus=domain,0,1 and the sequence above. There is no WARNING.
>    All CPU offlines and onlines complete. Q gets the domain 2-3, and the
>    top cpuset gets none. The top cpuset gets the domain 2-3 back when Q
>    becomes a member again.
> - The same boot, with P as an isolated partition. Q is a root
>    partition first, then isolated too. With both isolated, no partition
>    root has a housekeeping CPU. The scheduler then gets no domain, and
>    CPU hotplug works. Making Q isolated also warns in
>    cpuset_update_sd_hk_unlock(). That is a separate problem, which I
>    report separately. The patch does not touch that path.
> - No isolcpus, and the same sequence. There is no WARNING. The top
>    cpuset keeps its domain 0-1.
>
> test_cpuset_prs.sh passes on 9 CPUs. It also passes on 10 CPUs with
> isolcpus=domain,9. I did not run the crash sequence again on a kernel
> without the fix.
>
> The analysis and the patch were written by an LLM coding assistant
> under my direction and review.
>
> Thanks,
>
> Mathieu
>
> [1] https://lore.kernel.org/all/20261107014451.1487825-1-mathieu.desnoyers@efficios.com/
>
> -- >8 --
> From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
> Subject: cgroup/cpuset: Do not build an empty sched domain for the top cpuset
>
> The scheduler expects each sched domain from cpuset to hold at least
> one CPU. Commit cd1cb3350561 ("sched/topology: Don't try to build empty
> sched domains") made generate_sched_domains() skip a cpuset with an
> empty effective_cpus. It also made build_sched_domains() warn on an
> empty mask.
>
> The top cpuset may hold CPUs isolated at boot. Commit 9b496a8bbed9
> ("cgroup/cpuset: Prevent leakage of isolated CPUs into sched domains")
> removes them from its sched domain. The check for an empty domain was
> not updated. It still tests effective_cpus, which includes the isolated
> CPUs.
>
> So partitions that take all the housekeeping CPUs leave the top cpuset
> with an empty domain. For example, boot 5 CPUs with isolcpus=domain,0,1.
> Then make CPUs 2-3 and 4 root partitions. build_sched_domains() warns.
> The scheduler still records the empty mask as a current domain. At the
> next rebuild, the new empty domain matches it.
> partition_sched_domains_locked() then calls cpu_rq() on cpumask_first()
> of the empty mask, which is not a valid CPU. In a VM, the next CPU
> offline panicked there.
>
> Fix this by keeping a partition root only if its effective_cpus holds a
> housekeeping CPU. This tests the mask that the top cpuset gets.
> prstate_housekeeping_conflict() keeps boot time isolated CPUs out of
> the other partition roots. So nothing changes for them.
>
> This change was developed with assistance from an LLM.
>
> Fixes: 9b496a8bbed9 ("cgroup/cpuset: Prevent leakage of isolated CPUs into sched domains")
> Cc: stable@vger.kernel.org
> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
> ---
>   kernel/cgroup/cpuset.c | 7 +++++--
>   1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
> index 3219f927c35e..426c98cf4a08 100644
> --- a/kernel/cgroup/cpuset.c
> +++ b/kernel/cgroup/cpuset.c
> @@ -894,10 +894,13 @@ static int generate_sched_domains(cpumask_var_t **domains,
>   	cpuset_for_each_descendant_pre(cp, pos_css, &top_cpuset) {
>   		/*
>   		 * Only valid partition roots that are not isolated and with
> -		 * non-empty effective_cpus will be saved into csa[].
> +		 * housekeeping CPUs in effective_cpus will be saved into csa[].
> +		 * The top cpuset may keep only boot time isolated CPUs. It then
> +		 * gets no sched domain.
>   		 */
>   		if ((cp->partition_root_state == PRS_ROOT) &&
> -		    !cpumask_empty(cp->effective_cpus))
> +		    cpumask_intersects(cp->effective_cpus,
> +				       housekeeping_cpumask(HK_TYPE_DOMAIN_BOOT)))
>   			csa[ndoms++] = cp;
>   
>   		/*

This patch is correct AFAICS. I am not against it but it may not be 
necessary after we make sure that there is at least one HK online CPU in 
the top sched domain.

Cheers,
Longman

Re: [BUG] cpuset: empty sched domain with isolcpus=domain, panic at CPU offline

[Mathieu Desnoyers]

On 2026-11-08 13:35, Waiman Long wrote:
[...]
> Yes, we are going to add the check to make sure that there will be at
> least one housekeeping CPU left for the top_cpuset sched domain.
>
> See
> https://lore.kernel.org/lkml/20261105130344.664336-1-guopeng.zhang@linux.dev/

Thanks, I had missed that series. Refusing such a partition is a better
fix than giving the top cpuset no sched domain.

> This patch is correct AFAICS. I am not against it but it may not be
> necessary after we make sure that there is at least one HK online CPU in
> the top sched domain.

Then I will drop my patch and rely on Guopeng's series. I can test its
v3 on the setup that hit the panic: 5 vCPUs with isolcpus=domain,0,1.

By my reading, your _cpu_down() patch covers a case that cpuset cannot
fix. With no partition, the last online housekeeping CPU could go
offline. No partition could then give one back.

Thanks,

Mathieu