mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* linux-3.1-0-rc4 bus error ... MPS configured higher than maximum supported by the device. If a bus issue occurs, try running with pci=pcie_bus_safe.
@ 2011-09-05 14:55 Jeff Chua
  2011-09-06  6:09 ` Jeff Chua
  0 siblings, 1 reply; 9+ messages in thread
From: Jeff Chua @ 2011-09-05 14:55 UTC (permalink / raw)
  To: lkml, Jordan_Hargrave, Jon Mason, Jesse Barnes

Got the following error after upgrading from linux-2.6.36 to
linux-3.1.0-rc4 on a Dell PowerEdge 2950 that has a PCIe fax card, and
the system LED panel shows "Bus Fatal Error".


Is is normal or should I try out "pci=pcie_bus_safe" or "pci=pci" as
suggested in the dmesg?

There was another error that also showed up on 2.6.36 but I'm ignoring
that for now ( ... disabling ASPM on pre-1.1 PCIe device.  You can
enable it with 'pcie_aspm=force')

pci 0000:07:00.0: Dev MPS 128 MPSS 256 MRRS 4096
pci 0000:07:00.0: Dev MPS 256 MPSS 256 MRRS 128
pci 0000:08:00.0: Dev MPS 128 MPSS 128 MRRS 128
pci 0000:08:00.0: MPS configured higher than maximum supported by the
device.  If a bus issue occurs, try running with pci=pcie_bus_safe.
pci 0000:08:00.0: Dev MPS 256 MPSS 256 MRRS 128
Uhhuh. NMI received for unknown reason 31 on CPU 0.
Do you have a strange power saving mode enabled?
Dazed and confused, but trying to continue
pci 0000:07:01.0: Dev MPS 128 MPSS 256 MRRS 4096
pci 0000:07:01.0: Dev MPS 256 MPSS 256 MRRS 128
pci 0000:00:06.0: Dev MPS 256 MPSS 256 MRRS 128
pci 0000:0e:00.0: Dev MPS 128 MPSS 128 MRRS 512
pci 0000:0e:00.0: MPS configured higher than maximum supported by the
device.  If a bus issue occurs, try running with pci=pci


Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2011-09-10 11:28 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-09-05 14:55 linux-3.1-0-rc4 bus error ... MPS configured higher than maximum supported by the device. If a bus issue occurs, try running with pci=pcie_bus_safe Jeff Chua
2011-09-06  6:09 ` Jeff Chua
2011-09-06  6:25   ` Eric Dumazet
2011-09-06  8:39     ` Jeff Chua
2011-09-10  2:55       ` Linus Torvalds
2011-09-10  4:49         ` Eric Dumazet
2011-09-10  5:55           ` Jeff Chua
2011-09-10  7:57             ` Eric Dumazet
2011-09-10 11:28               ` Jeff Chua

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®