[PATCH 9/9] drm/i915: Initialize PCH refclks at modeset init time

[Keith Packard <keithp@keithp.com>]

The reference clock configuration must be done before any mode setting
can occur as all outputs must be disabled to change
anything. Initialize the clocks after turning everything off during
the initialization process.

Signed-off-by: Keith Packard <keithp@keithp.com>
---
 drivers/gpu/drm/i915/intel_display.c |   10 +++++++---
 1 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 919db79..1cc0962 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5109,7 +5109,10 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 	return ret;
 }
 
-static void ironlake_update_pch_refclk(struct drm_device *dev)
+/*
+ * Initialize reference clocks when the driver loads
+ */
+static void ironlake_init_pch_refclk(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_mode_config *mode_config = &dev->mode_config;
@@ -5401,8 +5404,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
 			     &m_n);
 
-	ironlake_update_pch_refclk(dev);
-
 	fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
 	if (has_reduced_clock)
 		fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
@@ -7274,6 +7275,9 @@ static void intel_setup_outputs(struct drm_device *dev)
 
 	/* disable all the possible outputs/crtcs before entering KMS mode */
 	drm_helper_disable_unused_functions(dev);
+
+	if (HAS_PCH_SPLIT(dev))
+		ironlake_init_pch_refclk(dev);
 }
 
 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
-- 
1.7.6.3