From: Keith Packard <keithp@keithp.com>
To: Dave Airlie <airlied@redhat.com>
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
intel-gfx@lists.freedesktop.org,
Keith Packard <keithp@keithp.com>
Subject: [PATCH 2/9] drm/i915: Use DRM_DEBUG_KMS for all messages in intel_bios.c
Date: Mon, 26 Sep 2011 23:11:39 -0700 [thread overview]
Message-ID: <1317103906-4649-3-git-send-email-keithp@keithp.com> (raw)
In-Reply-To: <1317103906-4649-1-git-send-email-keithp@keithp.com>
These are all KMS related anyways, so don't hide them under other
debug levels.
Signed-off-by: Keith Packard <keithp@keithp.com>
---
drivers/gpu/drm/i915/intel_bios.c | 9 +++++++--
1 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 4c530fa..dcbc839 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -309,6 +309,11 @@ parse_general_features(struct drm_i915_private *dev_priv,
dev_priv->lvds_use_ssc = general->enable_ssc;
dev_priv->lvds_ssc_freq =
intel_bios_ssc_frequency(dev, general->ssc_freq);
+ DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d\n",
+ dev_priv->int_tv_support,
+ dev_priv->int_crt_support,
+ dev_priv->lvds_use_ssc,
+ dev_priv->lvds_ssc_freq);
}
}
@@ -610,7 +615,7 @@ init_vbt_defaults(struct drm_i915_private *dev_priv)
/* Default to using SSC */
dev_priv->lvds_use_ssc = 1;
dev_priv->lvds_ssc_freq = intel_bios_ssc_frequency(dev, 1);
- DRM_DEBUG("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
+ DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
/* eDP data */
dev_priv->edp.bpp = 18;
@@ -639,7 +644,7 @@ intel_parse_bios(struct drm_device *dev)
if (dev_priv->opregion.vbt) {
struct vbt_header *vbt = dev_priv->opregion.vbt;
if (memcmp(vbt->signature, "$VBT", 4) == 0) {
- DRM_DEBUG_DRIVER("Using VBT from OpRegion: %20s\n",
+ DRM_DEBUG_KMS("Using VBT from OpRegion: %20s\n",
vbt->signature);
bdb = (struct bdb_header *)((char *)vbt + vbt->bdb_offset);
} else
--
1.7.6.3
next prev parent reply other threads:[~2011-09-27 6:12 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <yunbou6lxb4.fsf@aiko.keithp.com>
2011-09-27 6:11 ` PCH reference clock cleanups Keith Packard
2011-09-27 6:11 ` [PATCH 1/9] drm/i915: broken copyright encoding in intel_bios.c Keith Packard
2011-09-27 6:11 ` Keith Packard [this message]
2011-09-27 16:39 ` [PATCH 2/9] drm/i915: Use DRM_DEBUG_KMS for all messages " Chris Wilson
2011-09-27 6:11 ` [PATCH 3/9] drv/i915: Pull display_clock_mode out of VBT table Keith Packard
2011-09-27 16:40 ` Chris Wilson
2011-09-27 6:11 ` [PATCH 4/9] drm/i915: Document a few more BDB_GENERAL_FEATURES bits from PCH BIOS Keith Packard
2011-09-27 6:11 ` [PATCH 5/9] drm/i915: Allow SSC parameter to override VBT value Keith Packard
2011-09-27 16:41 ` Chris Wilson
2011-09-27 6:11 ` [PATCH 6/9] drm/i915: Fix PCH SSC reference clock settings Keith Packard
2011-09-27 16:47 ` Chris Wilson
2011-09-27 18:03 ` Keith Packard
2011-09-28 9:09 ` Chris Wilson
2011-09-28 16:36 ` Keith Packard
2011-09-27 6:11 ` [PATCH 7/9] drm/i915: Use CK505 as non-SSC source where available Keith Packard
2011-09-27 16:49 ` Chris Wilson
2011-09-27 6:11 ` [PATCH 8/9] drm/i915: All PCH refclks are 120MHz Keith Packard
2011-09-27 16:53 ` Chris Wilson
2011-09-27 6:11 ` [PATCH 9/9] drm/i915: Initialize PCH refclks at modeset init time Keith Packard
2011-09-27 16:56 ` Chris Wilson
2011-09-27 18:11 ` Keith Packard
2011-10-03 21:12 ` [Intel-gfx] " Jesse Barnes
2011-09-28 23:15 ` Keith Packard
2011-09-27 9:01 ` PCH reference clock cleanups Chris Wilson
2011-09-27 16:54 ` Keith Packard
2011-09-28 18:22 ` [Intel-gfx] " Paulo Zanoni
2011-09-28 20:02 ` Keith Packard
2011-10-03 21:14 ` Jesse Barnes
2011-10-03 23:18 ` Keith Packard
2011-10-03 23:21 ` Jesse Barnes
2011-10-03 23:39 ` Keith Packard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317103906-4649-3-git-send-email-keithp@keithp.com \
--to=keithp@keithp.com \
--cc=airlied@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome