mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: mingo@elte.hu, laijs@cn.fujitsu.com, dipankar@in.ibm.com,
	akpm@linux-foundation.org, mathieu.desnoyers@polymtl.ca,
	josh@joshtriplett.org, niv@us.ibm.com, tglx@linutronix.de,
	peterz@infradead.org, rostedt@goodmis.org,
	Valdis.Kletnieks@vt.edu, dhowells@redhat.com,
	eric.dumazet@gmail.com, darren@dvhart.com, patches@linaro.org,
	"Paul E. McKenney" <paul.mckenney@linaro.org>,
	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Subject: [PATCH RFC tip/core/rcu 25/28] rcu: Deconfuse dynticks entry-exit tracing
Date: Wed,  2 Nov 2011 13:30:46 -0700	[thread overview]
Message-ID: <1320265849-5744-25-git-send-email-paulmck@linux.vnet.ibm.com> (raw)
In-Reply-To: <20111102203017.GA3830@linux.vnet.ibm.com>

From: Paul E. McKenney <paul.mckenney@linaro.org>

The trace_rcu_dyntick() trace event did not print both the old and
the new value of the nesting level, and furthermore printed only
the low-order 32 bits of it.  This could result in some confusion
when interpreting trace-event dumps, so this commit prints both
the old and the new value, prints the full 64 bits, and also selects
the process-entry/exit increment to print nicely in hexadecimal.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
 include/trace/events/rcu.h |   15 +++++++++------
 kernel/rcu.h               |    7 +++++++
 kernel/rcutiny.c           |   28 +++++++++++++++++-----------
 kernel/rcutree.c           |   35 ++++++++++++++++++++---------------
 4 files changed, 53 insertions(+), 32 deletions(-)

diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h
index 172620a..c29fb2f 100644
--- a/include/trace/events/rcu.h
+++ b/include/trace/events/rcu.h
@@ -246,21 +246,24 @@ TRACE_EVENT(rcu_fqs,
  */
 TRACE_EVENT(rcu_dyntick,
 
-	TP_PROTO(char *polarity, int nesting),
+	TP_PROTO(char *polarity, long long oldnesting, long long newnesting),
 
-	TP_ARGS(polarity, nesting),
+	TP_ARGS(polarity, oldnesting, newnesting),
 
 	TP_STRUCT__entry(
 		__field(char *, polarity)
-		__field(int, nesting)
+		__field(long long, oldnesting)
+		__field(long long, newnesting)
 	),
 
 	TP_fast_assign(
 		__entry->polarity = polarity;
-		__entry->nesting = nesting;
+		__entry->oldnesting = oldnesting;
+		__entry->newnesting = newnesting;
 	),
 
-	TP_printk("%s %d", __entry->polarity, __entry->nesting)
+	TP_printk("%s %llx %llx", __entry->polarity,
+		  __entry->oldnesting, __entry->newnesting)
 );
 
 /*
@@ -470,7 +473,7 @@ TRACE_EVENT(rcu_torture_read,
 #define trace_rcu_unlock_preempted_task(rcuname, gpnum, pid) do { } while (0)
 #define trace_rcu_quiescent_state_report(rcuname, gpnum, mask, qsmask, level, grplo, grphi, gp_tasks) do { } while (0)
 #define trace_rcu_fqs(rcuname, gpnum, cpu, qsevent) do { } while (0)
-#define trace_rcu_dyntick(polarity, nesting) do { } while (0)
+#define trace_rcu_dyntick(polarity, oldnesting, newnesting) do { } while (0)
 #define trace_rcu_callback(rcuname, rhp, qlen) do { } while (0)
 #define trace_rcu_kfree_callback(rcuname, rhp, offset, qlen) do { } while (0)
 #define trace_rcu_batch_start(rcuname, qlen, blimit) do { } while (0)
diff --git a/kernel/rcu.h b/kernel/rcu.h
index f600868..aa88baa 100644
--- a/kernel/rcu.h
+++ b/kernel/rcu.h
@@ -30,6 +30,13 @@
 #endif /* #else #ifdef CONFIG_RCU_TRACE */
 
 /*
+ * Process-level increment to ->dynticks_nesting field.  This allows for
+ * architectures that use half-interrupts and half-exceptions from
+ * process context.
+ */
+#define DYNTICK_TASK_NESTING (LLONG_MAX / 2 - 1)
+
+/*
  * debug_rcu_head_queue()/debug_rcu_head_unqueue() are used internally
  * by call_rcu() and rcu callback execution, and are therefore not part of the
  * RCU API. Leaving in rcupdate.h because they are used by all RCU flavors.
diff --git a/kernel/rcutiny.c b/kernel/rcutiny.c
index 089820d..e0df33f 100644
--- a/kernel/rcutiny.c
+++ b/kernel/rcutiny.c
@@ -54,20 +54,21 @@ static void __call_rcu(struct rcu_head *head,
 
 #include "rcutiny_plugin.h"
 
-static long long rcu_dynticks_nesting = LLONG_MAX / 2;
+static long long rcu_dynticks_nesting = DYNTICK_TASK_NESTING;
 
 /* Common code for rcu_idle_enter() and rcu_irq_exit(), see kernel/rcutree.c. */
-static void rcu_idle_enter_common(void)
+static void rcu_idle_enter_common(long long oldval)
 {
 	if (rcu_dynticks_nesting) {
-		RCU_TRACE(trace_rcu_dyntick("--=", rcu_dynticks_nesting));
+		RCU_TRACE(trace_rcu_dyntick("--=",
+					    oldval, rcu_dynticks_nesting));
 		return;
 	}
-	RCU_TRACE(trace_rcu_dyntick("Start", rcu_dynticks_nesting));
+	RCU_TRACE(trace_rcu_dyntick("Start", oldval, rcu_dynticks_nesting));
 	if (!idle_cpu(smp_processor_id())) {
 		WARN_ON_ONCE(1);	/* must be idle task! */
 		RCU_TRACE(trace_rcu_dyntick("Error on entry: not idle task",
-					    rcu_dynticks_nesting));
+					    oldval, rcu_dynticks_nesting));
 		ftrace_dump(DUMP_ALL);
 	}
 	rcu_sched_qs(0); /* implies rcu_bh_qsctr_inc(0) */
@@ -80,10 +81,12 @@ static void rcu_idle_enter_common(void)
 void rcu_idle_enter(void)
 {
 	unsigned long flags;
+	long long oldval;
 
 	local_irq_save(flags);
+	oldval = rcu_dynticks_nesting;
 	rcu_dynticks_nesting = 0;
-	rcu_idle_enter_common();
+	rcu_idle_enter_common(oldval);
 	local_irq_restore(flags);
 }
 
@@ -93,11 +96,13 @@ void rcu_idle_enter(void)
 void rcu_irq_exit(void)
 {
 	unsigned long flags;
+	long long oldval;
 
 	local_irq_save(flags);
+	oldval = rcu_dynticks_nesting;
 	rcu_dynticks_nesting--;
 	WARN_ON_ONCE(rcu_dynticks_nesting < 0);
-	rcu_idle_enter_common();
+	rcu_idle_enter_common(oldval);
 	local_irq_restore(flags);
 }
 
@@ -105,14 +110,15 @@ void rcu_irq_exit(void)
 static void rcu_idle_exit_common(long long oldval)
 {
 	if (oldval) {
-		RCU_TRACE(trace_rcu_dyntick("++=", rcu_dynticks_nesting));
+		RCU_TRACE(trace_rcu_dyntick("++=",
+					    oldval, rcu_dynticks_nesting));
 		return;
 	}
-	RCU_TRACE(trace_rcu_dyntick("End", oldval));
+	RCU_TRACE(trace_rcu_dyntick("End", oldval, rcu_dynticks_nesting));
 	if (!idle_cpu(smp_processor_id())) {
 		WARN_ON_ONCE(1);	/* must be idle task! */
 		RCU_TRACE(trace_rcu_dyntick("Error on exit: not idle task",
-			  oldval));
+			  oldval, rcu_dynticks_nesting));
 		ftrace_dump(DUMP_ALL);
 	}
 }
@@ -128,7 +134,7 @@ void rcu_idle_exit(void)
 	local_irq_save(flags);
 	oldval = rcu_dynticks_nesting;
 	WARN_ON_ONCE(oldval != 0);
-	rcu_dynticks_nesting = LLONG_MAX / 2;
+	rcu_dynticks_nesting = DYNTICK_TASK_NESTING;
 	rcu_idle_exit_common(oldval);
 	local_irq_restore(flags);
 }
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 28f8f92..cc04876 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -196,7 +196,7 @@ void rcu_note_context_switch(int cpu)
 EXPORT_SYMBOL_GPL(rcu_note_context_switch);
 
 DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
-	.dynticks_nesting = LLONG_MAX / 2,
+	.dynticks_nesting = DYNTICK_TASK_NESTING,
 	.dynticks = ATOMIC_INIT(1),
 };
 
@@ -348,17 +348,17 @@ static int rcu_implicit_offline_qs(struct rcu_data *rdp)
  * we really have entered idle, and must do the appropriate accounting.
  * The caller must have disabled interrupts.
  */
-static void rcu_idle_enter_common(struct rcu_dynticks *rdtp)
+static void rcu_idle_enter_common(struct rcu_dynticks *rdtp, long long oldval)
 {
 	if (rdtp->dynticks_nesting) {
-		trace_rcu_dyntick("--=", rdtp->dynticks_nesting);
+		trace_rcu_dyntick("--=", oldval, rdtp->dynticks_nesting);
 		return;
 	}
-	trace_rcu_dyntick("Start", rdtp->dynticks_nesting);
+	trace_rcu_dyntick("Start", oldval, rdtp->dynticks_nesting);
 	if (!idle_cpu(smp_processor_id())) {
 		WARN_ON_ONCE(1);	/* must be idle task! */
 		trace_rcu_dyntick("Error on entry: not idle task",
-				   rdtp->dynticks_nesting);
+				   oldval, rdtp->dynticks_nesting);
 		ftrace_dump(DUMP_ALL);
 	}
 	/* CPUs seeing atomic_inc() must see prior RCU read-side crit sects */
@@ -383,12 +383,14 @@ static void rcu_idle_enter_common(struct rcu_dynticks *rdtp)
 void rcu_idle_enter(void)
 {
 	unsigned long flags;
+	long long oldval;
 	struct rcu_dynticks *rdtp;
 
 	local_irq_save(flags);
 	rdtp = &__get_cpu_var(rcu_dynticks);
+	oldval = rdtp->dynticks_nesting;
 	rdtp->dynticks_nesting = 0;
-	rcu_idle_enter_common(rdtp);
+	rcu_idle_enter_common(rdtp, oldval);
 	local_irq_restore(flags);
 }
 
@@ -411,13 +413,15 @@ void rcu_idle_enter(void)
 void rcu_irq_exit(void)
 {
 	unsigned long flags;
+	long long oldval;
 	struct rcu_dynticks *rdtp;
 
 	local_irq_save(flags);
 	rdtp = &__get_cpu_var(rcu_dynticks);
+	oldval = rdtp->dynticks_nesting;
 	rdtp->dynticks_nesting--;
 	WARN_ON_ONCE(rdtp->dynticks_nesting < 0);
-	rcu_idle_enter_common(rdtp);
+	rcu_idle_enter_common(rdtp, oldval);
 	local_irq_restore(flags);
 }
 
@@ -431,7 +435,7 @@ void rcu_irq_exit(void)
 static void rcu_idle_exit_common(struct rcu_dynticks *rdtp, long long oldval)
 {
 	if (oldval) {
-		trace_rcu_dyntick("++=", rdtp->dynticks_nesting);
+		trace_rcu_dyntick("++=", oldval, rdtp->dynticks_nesting);
 		return;
 	}
 	smp_mb__before_atomic_inc();  /* Force ordering w/previous sojourn. */
@@ -439,10 +443,11 @@ static void rcu_idle_exit_common(struct rcu_dynticks *rdtp, long long oldval)
 	/* CPUs seeing atomic_inc() must see later RCU read-side crit sects */
 	smp_mb__after_atomic_inc();  /* See above. */
 	WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1));
-	trace_rcu_dyntick("End", oldval);
+	trace_rcu_dyntick("End", oldval, rdtp->dynticks_nesting);
 	if (!idle_cpu(smp_processor_id())) {
 		WARN_ON_ONCE(1);	/* must be idle task! */
-		trace_rcu_dyntick("Error on exit: not idle task", oldval);
+		trace_rcu_dyntick("Error on exit: not idle task",
+				  oldval, rdtp->dynticks_nesting);
 		ftrace_dump(DUMP_ALL);
 	}
 }
@@ -453,8 +458,8 @@ static void rcu_idle_exit_common(struct rcu_dynticks *rdtp, long long oldval)
  * Exit idle mode, in other words, -enter- the mode in which RCU
  * read-side critical sections can occur.
  *
- * We crowbar the ->dynticks_nesting field to LLONG_MAX/2 to allow for
- * the possibility of usermode upcalls messing up our count
+ * We crowbar the ->dynticks_nesting field to DYNTICK_TASK_NESTING to
+ * allow for the possibility of usermode upcalls messing up our count
  * of interrupt nesting level during the busy period that is just
  * now starting.
  */
@@ -468,7 +473,7 @@ void rcu_idle_exit(void)
 	rdtp = &__get_cpu_var(rcu_dynticks);
 	oldval = rdtp->dynticks_nesting;
 	WARN_ON_ONCE(oldval != 0);
-	rdtp->dynticks_nesting = LLONG_MAX / 2;
+	rdtp->dynticks_nesting = DYNTICK_TASK_NESTING;
 	rcu_idle_exit_common(rdtp, oldval);
 	local_irq_restore(flags);
 }
@@ -2012,7 +2017,7 @@ rcu_boot_init_percpu_data(int cpu, struct rcu_state *rsp)
 		rdp->nxttail[i] = &rdp->nxtlist;
 	rdp->qlen = 0;
 	rdp->dynticks = &per_cpu(rcu_dynticks, cpu);
-	WARN_ON_ONCE(rdp->dynticks->dynticks_nesting != LLONG_MAX / 2);
+	WARN_ON_ONCE(rdp->dynticks->dynticks_nesting != DYNTICK_TASK_NESTING);
 	WARN_ON_ONCE(atomic_read(&rdp->dynticks->dynticks) != 1);
 	rdp->cpu = cpu;
 	rdp->rsp = rsp;
@@ -2040,7 +2045,7 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptible)
 	rdp->qlen_last_fqs_check = 0;
 	rdp->n_force_qs_snap = rsp->n_force_qs;
 	rdp->blimit = blimit;
-	WARN_ON_ONCE(rdp->dynticks->dynticks_nesting != LLONG_MAX / 2);
+	WARN_ON_ONCE(rdp->dynticks->dynticks_nesting != DYNTICK_TASK_NESTING);
 	WARN_ON_ONCE((atomic_read(&rdp->dynticks->dynticks) & 0x1) != 1);
 	raw_spin_unlock(&rnp->lock);		/* irqs remain disabled. */
 
-- 
1.7.3.2


  parent reply	other threads:[~2011-11-02 20:32 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-02 20:30 [PATCH RFC tip/core/rcu 0/28] Preview of RCU changes for 3.3 Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 01/28] powerpc: Strengthen value-returning-atomics memory barriers Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 02/28] rcu: ->signaled better named ->fqs_state Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 03/28] rcu: Avoid RCU-preempt expedited grace-period botch Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 04/28] rcu: Make synchronize_sched_expedited() better at work sharing Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 05/28] lockdep: Update documentation for lock-class leak detection Paul E. McKenney
2011-11-03  2:57   ` Josh Triplett
2011-11-03 19:42     ` Paul E. McKenney
2011-11-09 14:02       ` Peter Zijlstra
2011-11-10 17:22         ` Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 06/28] rcu: Track idleness independent of idle tasks Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 07/28] trace: Allow ftrace_dump() to be called from modules Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 08/28] rcu: Add failure tracing to rcutorture Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 09/28] rcu: Document failing tick as cause of RCU CPU stall warning Paul E. McKenney
2011-11-03  3:07   ` Josh Triplett
2011-11-03 13:25     ` Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 10/28] rcu: Disable preemption in rcu_is_cpu_idle() Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 11/28] rcu: Omit self-awaken when setting up expedited grace period Paul E. McKenney
2011-11-03  3:16   ` Josh Triplett
2011-11-03 19:43     ` Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 12/28] rcu: Detect illegal rcu dereference in extended quiescent state Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 13/28] rcu: Inform the user about extended quiescent state on PROVE_RCU warning Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 14/28] rcu: Warn when rcu_read_lock() is used in extended quiescent state Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 15/28] rcu: Remove one layer of abstraction from PROVE_RCU checking Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 16/28] rcu: Warn when srcu_read_lock() is used in an extended quiescent state Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 17/28] rcu: Make srcu_read_lock_held() call common lockdep-enabled function Paul E. McKenney
2011-11-03  3:48   ` Josh Triplett
2011-11-03 11:14     ` Frederic Weisbecker
2011-11-03 13:19       ` Steven Rostedt
2011-11-03 13:30         ` Paul E. McKenney
2011-11-03 13:29       ` Paul E. McKenney
2011-11-03 13:59         ` Steven Rostedt
2011-11-03 20:14           ` Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 18/28] nohz: Separate out irq exit and idle loop dyntick logic Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 19/28] nohz: Allow rcu extended quiescent state handling seperately from tick stop Paul E. McKenney
2011-11-03  4:00   ` Josh Triplett
2011-11-03 11:54     ` Frederic Weisbecker
2011-11-03 13:32       ` Paul E. McKenney
2011-11-03 15:31         ` Josh Triplett
2011-11-03 16:06           ` Paul E. McKenney
2011-11-09 14:28             ` Peter Zijlstra
2011-11-09 16:48             ` Frederic Weisbecker
2011-11-10 10:52               ` Peter Zijlstra
2011-11-10 17:22               ` Paul E. McKenney
2011-11-15 18:30                 ` Frederic Weisbecker
2011-11-16 19:41                   ` Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 20/28] x86: Enter rcu extended qs after idle notifier call Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 21/28] x86: Call idle notifier after irq_enter() Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 22/28] rcu: Fix early call to rcu_idle_enter() Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 23/28] powerpc: Tell RCU about idle after hcall tracing Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 24/28] rcu: Introduce bulk reference count Paul E. McKenney
2011-11-03  4:34   ` Josh Triplett
2011-11-03 13:34     ` Paul E. McKenney
2011-11-03 20:19       ` Paul E. McKenney
2011-11-28 12:41   ` Peter Zijlstra
2011-11-28 17:15     ` Paul E. McKenney
2011-11-28 18:17       ` Peter Zijlstra
2011-11-28 18:31         ` Paul E. McKenney
2011-11-28 18:35           ` Peter Zijlstra
2011-11-29 13:33             ` Peter Zijlstra
2011-11-29 17:41               ` Paul E. McKenney
2011-11-28 18:36           ` Peter Zijlstra
2011-11-02 20:30 ` Paul E. McKenney [this message]
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 26/28] rcu: Add more information to the wrong-idle-task complaint Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 27/28] rcu: Allow dyntick-idle mode for CPUs with callbacks Paul E. McKenney
2011-11-03  4:47   ` Josh Triplett
2011-11-03 19:53     ` Paul E. McKenney
2011-11-02 20:30 ` [PATCH RFC tip/core/rcu 28/28] rcu: Fix idle-task checks Paul E. McKenney
2011-11-03  4:55   ` Josh Triplett
2011-11-03 21:00     ` Paul E. McKenney
2011-11-03 23:05       ` Josh Triplett
2011-11-09 14:52     ` Peter Zijlstra
2011-11-03  4:55 ` [PATCH RFC tip/core/rcu 0/28] Preview of RCU changes for 3.3 Josh Triplett
2011-11-03 21:45   ` Paul E. McKenney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1320265849-5744-25-git-send-email-paulmck@linux.vnet.ibm.com \
    --to=paulmck@linux.vnet.ibm.com \
    --cc=Valdis.Kletnieks@vt.edu \
    --cc=akpm@linux-foundation.org \
    --cc=darren@dvhart.com \
    --cc=dhowells@redhat.com \
    --cc=dipankar@in.ibm.com \
    --cc=eric.dumazet@gmail.com \
    --cc=josh@joshtriplett.org \
    --cc=laijs@cn.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mathieu.desnoyers@polymtl.ca \
    --cc=mingo@elte.hu \
    --cc=niv@us.ibm.com \
    --cc=patches@linaro.org \
    --cc=paul.mckenney@linaro.org \
    --cc=peterz@infradead.org \
    --cc=rostedt@goodmis.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®