mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Oskar Schirmer" <oskar@scara.com>
To: "Fabio Estevam" <fabio.estevam@freescale.com>
Cc: "Andrew Morton" <akpm@linux-foundation.org>,
	linux-kernel@vger.kernel.org,
	"Zeng Zhaoming" <zengzm.kernel@gmail.com>,
	alsa-devel@alsa-project.org,
	"Liam Girdwood" <lgirdwood@gmail.com>,
	"Takashi Iwai" <tiwai@suse.de>,
	"Jaroslav Kysela" <perex@perex.cz>,
	"Wolfram Sang" <w.sang@pengutronix.de>,
	broonie@kernel.org, "Oskar Schirmer" <oskar@scara.com>
Subject: [PATCH v3] sound/sgtl5000: fix codec register initial values and handling
Date: 19 Jun 2013 13:16:06 +0000	[thread overview]
Message-ID: <1371647766-4900-1-git-send-email-oskar@scara.com> (raw)
In-Reply-To: <51B749F5.3010907@freescale.com>

According to documentation bit 3:2 in register SSS_CTRL are
reserved and zero, so initially setting the register to 0x0008
does not make much sense. Instead, bit 4 should be marked set,
as this is the power up default.

Further, mask computation in declarative part is obviously wrong:
Fix FRAC DIVISOR to provide an 11 bit mask correctly.

Next, powering down PLL before switching to a mode that
does not use it, is a bad idea. So first set the mode control,
then power down PLL.

Signed-off-by: Oskar Schirmer <oskar@scara.com>
---
 sound/soc/codecs/sgtl5000.c |   11 +++++++----
 sound/soc/codecs/sgtl5000.h |    2 +-
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 92bbfec..6162e19 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -38,7 +38,7 @@
 static const struct reg_default sgtl5000_reg_defaults[] = {
 	{ SGTL5000_CHIP_CLK_CTRL,		0x0008 },
 	{ SGTL5000_CHIP_I2S_CTRL,		0x0010 },
-	{ SGTL5000_CHIP_SSS_CTRL,		0x0008 },
+	{ SGTL5000_CHIP_SSS_CTRL,		0x0010 },
 	{ SGTL5000_CHIP_DAC_VOL,		0x3c3c },
 	{ SGTL5000_CHIP_PAD_STRENGTH,		0x015f },
 	{ SGTL5000_CHIP_ANA_HP_CTRL,		0x1818 },
@@ -644,16 +644,19 @@ static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
 		snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
 			SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
 			SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP);
+
+		/* if using pll, clk_ctrl must be set after pll power up */
+		snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
 	} else {
+		/* otherwise, clk_ctrl must be set before pll power down */
+		snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
+
 		/* power down pll */
 		snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
 			SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
 			0);
 	}
 
-	/* if using pll, clk_ctrl must be set after pll power up */
-	snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
-
 	return 0;
 }
 
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
index 8a9f435..d3a68bb 100644
--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -347,7 +347,7 @@
 #define SGTL5000_PLL_INT_DIV_MASK		0xf800
 #define SGTL5000_PLL_INT_DIV_SHIFT		11
 #define SGTL5000_PLL_INT_DIV_WIDTH		5
-#define SGTL5000_PLL_FRAC_DIV_MASK		0x0700
+#define SGTL5000_PLL_FRAC_DIV_MASK		0x07ff
 #define SGTL5000_PLL_FRAC_DIV_SHIFT		0
 #define SGTL5000_PLL_FRAC_DIV_WIDTH		11
 
-- 
1.7.9.5


  parent reply	other threads:[~2013-06-19 13:16 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-11  8:12 [PATCH] sound/sgtl5000: fix codec register initial values and mask Oskar Schirmer
2013-06-11 12:20 ` Fabio Estevam
2013-06-11 15:22   ` [PATCH v2] " Oskar Schirmer
2013-06-11 16:01     ` Fabio Estevam
2013-06-12 16:08       ` Mark Brown
2013-06-19 13:16       ` Oskar Schirmer [this message]
2013-06-19 15:26         ` [PATCH v3] sound/sgtl5000: fix codec register initial values and handling Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371647766-4900-1-git-send-email-oskar@scara.com \
    --to=oskar@scara.com \
    --cc=akpm@linux-foundation.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=fabio.estevam@freescale.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.de \
    --cc=w.sang@pengutronix.de \
    --cc=zengzm.kernel@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®