[PATCH v2 0/3] Add power control for lm90

[Wei Ni <wni@nvidia.com>]

The device lm90 can be controlled by the vdd rail.
Add function to power on/off the vdd.
Enable the nct1008 on Tegra114 Dalmore board, and set the vdd-regulator.

This series is v2, previous version patches:
[v1]: http://www.mail-archive.com/linux-tegra@vger.kernel.org/msg12034.html

Changes from v1:
1. if get regulator failed, we should continue to run probe function,
not return fail.
2. call regulator_put() in error handler and remove function.
3. add LM90 DT binding document.

Wei Ni (3):
  hwmon: (lm90) Add power control
  ARM: dt: t114 dalmore: add dt entry for nct1008
  Documentation: dt: hwmon: add OF document for lm90

 Documentation/devicetree/bindings/hwmon/lm90.txt |   20 +++++++++
 arch/arm/boot/dts/tegra114-dalmore.dts           |   10 ++++-
 drivers/hwmon/lm90.c                             |   49 ++++++++++++++++++++++
 3 files changed, 78 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/hwmon/lm90.txt

-- 
1.7.9.5