From: Wei Ni <wni@nvidia.com>
To: <khali@linux-fr.org>, <linux@roeck-us.net>, <swarren@wwwdotorg.org>
Cc: <MLongnecker@nvidia.com>, <linux-arm-kernel@lists.infradead.org>,
<lm-sensors@lm-sensors.org>, <linux-kernel@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, Wei Ni <wni@nvidia.com>
Subject: [PATCH v2 2/3] ARM: dt: t114 dalmore: add dt entry for nct1008
Date: Thu, 8 Aug 2013 14:56:30 +0800 [thread overview]
Message-ID: <1375944991-29182-3-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1375944991-29182-1-git-send-email-wni@nvidia.com>
Enable thermal sensor nct1008 for t114 dalmore.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm/boot/dts/tegra114-dalmore.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index b5a42f0..9d4d2b2 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -738,6 +738,14 @@
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
+
+ nct1008 {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ vdd-supply = <&palmas_ldo6_reg>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+ };
};
i2c@7000d000 {
@@ -945,7 +953,7 @@
regulator-max-microvolt = <1800000>;
};
- ldo6 {
+ palmas_ldo6_reg: ldo6 {
regulator-name = "vdd-sensor-2v85";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
--
1.7.9.5
next prev parent reply other threads:[~2013-08-08 6:57 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-08 6:56 [PATCH v2 0/3] Add power control for lm90 Wei Ni
2013-08-08 6:56 ` [PATCH v2 1/3] hwmon: (lm90) Add power control Wei Ni
2013-08-08 7:13 ` Alexander Shiyan
2013-08-08 9:26 ` Wei Ni
2013-08-08 8:42 ` Guenter Roeck
2013-08-08 9:47 ` Wei Ni
2013-08-08 9:57 ` Alexander Shiyan
2013-08-08 9:59 ` Wei Ni
2013-08-08 10:07 ` Wei Ni
2013-08-08 11:23 ` Guenter Roeck
2013-08-08 17:33 ` Stephen Warren
2013-08-08 17:59 ` Guenter Roeck
2013-08-08 18:45 ` Stephen Warren
2013-08-08 17:30 ` Stephen Warren
2013-08-08 17:59 ` Guenter Roeck
2013-08-08 19:27 ` Mark Brown
2013-08-08 11:01 ` Mark Brown
2013-08-08 11:25 ` Guenter Roeck
2013-08-08 13:08 ` Mark Brown
2013-08-08 15:21 ` Guenter Roeck
2013-08-08 17:15 ` Mark Brown
2013-08-08 20:00 ` Guenter Roeck
2013-08-08 21:18 ` Mark Brown
2013-08-08 21:30 ` Guenter Roeck
2013-08-09 5:57 ` Proposal: I2C device power (Was: hwmon: (lm90) Add power control) Alexander Shiyan
2013-08-09 10:27 ` Mark Brown
2013-08-09 10:50 ` Alexander Shiyan
2013-08-09 11:09 ` Mark Brown
2013-08-09 7:23 ` [PATCH v2 1/3] hwmon: (lm90) Add power control Wei Ni
2013-08-09 10:56 ` Mark Brown
2013-08-08 6:56 ` Wei Ni [this message]
2013-08-08 17:35 ` [PATCH v2 2/3] ARM: dt: t114 dalmore: add dt entry for nct1008 Stephen Warren
2013-08-09 6:06 ` Wei Ni
2013-08-08 20:36 ` Sergei Shtylyov
2013-08-08 20:40 ` Stephen Warren
2013-08-08 21:33 ` Guenter Roeck
2013-08-09 6:16 ` Wei Ni
2013-08-08 6:56 ` [PATCH v2 3/3] Documentation: dt: hwmon: add OF document for lm90 Wei Ni
2013-08-08 17:37 ` Stephen Warren
2013-08-09 6:10 ` Wei Ni
2013-08-09 16:35 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375944991-29182-3-git-send-email-wni@nvidia.com \
--to=wni@nvidia.com \
--cc=MLongnecker@nvidia.com \
--cc=khali@linux-fr.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome