* [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support
@ 2014-01-10 2:39 John Tobias
2014-01-10 2:39 ` [PATCH v4 2/2] cpufreq: imx6q-cpufreq driver depends on SOC_IMX6Q/SOC_IMX6SL John Tobias
2014-01-13 3:20 ` [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support Shawn Guo
0 siblings, 2 replies; 8+ messages in thread
From: John Tobias @ 2014-01-10 2:39 UTC (permalink / raw)
To: rjw, viresh.kumar, cpufreq, linux-pm, linux-kernel, kernel,
linux, linux-arm-kernel, shawn.guo, festevam
Cc: John Tobias
Moved ARCH_HAS_CPUFREQ, HAVE_IMX_ANATOP and PM_OPP on ARCH_MXC so that
the user can enable the cpufreq support for iMX6Q and/or iMX6SL.
Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
---
arch/arm/mach-imx/Kconfig | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 7a6e6f7..d6aa34d 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,6 @@
config ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+ select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select ARM_PATCH_PHYS_VIRT
@@ -9,8 +10,10 @@ config ARCH_MXC
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
+ select HAVE_IMX_ANATOP if SOC_IMX6Q || SOC_IMX6SL
select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
select MULTI_IRQ_HANDLER
+ select PM_OPP if PM
select SOC_BUS
select SPARSE_IRQ
select USE_OF
@@ -779,16 +782,14 @@ config SOC_IMX53
config SOC_IMX6Q
bool "i.MX6 Quad/DualLite support"
- select ARCH_HAS_CPUFREQ
- select ARCH_HAS_OPP
+ select ARCH_HAS_OPP
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
select ARM_GIC
select CPU_V7
select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_IMX_ANATOP
+ select HAVE_ARM_TWD if SMP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
@@ -800,8 +801,7 @@ config SOC_IMX6Q
select PINCTRL_IMX6Q
select PL310_ERRATA_588369 if CACHE_PL310
select PL310_ERRATA_727915 if CACHE_PL310
- select PL310_ERRATA_769419 if CACHE_PL310
- select PM_OPP if PM
+ select PL310_ERRATA_769419 if CACHE_PL310
help
This enables support for Freescale i.MX6 Quad processor.
@@ -812,7 +812,6 @@ config SOC_IMX6SL
select ARM_ERRATA_775420
select ARM_GIC
select CPU_V7
- select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
--
1.8.3.2
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v4 2/2] cpufreq: imx6q-cpufreq driver depends on SOC_IMX6Q/SOC_IMX6SL
2014-01-10 2:39 [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support John Tobias
@ 2014-01-10 2:39 ` John Tobias
2014-01-13 3:26 ` Shawn Guo
2014-01-13 3:20 ` [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support Shawn Guo
1 sibling, 1 reply; 8+ messages in thread
From: John Tobias @ 2014-01-10 2:39 UTC (permalink / raw)
To: rjw, viresh.kumar, cpufreq, linux-pm, linux-kernel, kernel,
linux, linux-arm-kernel, shawn.guo, festevam
Cc: John Tobias
The ARCH_HAS_CPUFREQ, HAVE_IMX_ANATOP and PM_OPP are moved up to ARCH_MCX.
The driver should show if the SOC_IMX6Q and/or SOC_IMX6SL is/are selected.
Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
---
drivers/cpufreq/Kconfig.arm | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 3ba5dcc..230c663 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -80,7 +80,7 @@ config ARM_HIGHBANK_CPUFREQ
config ARM_IMX6Q_CPUFREQ
tristate "Freescale i.MX6 cpufreq support"
- depends on ARCH_MXC
+ depends on SOC_IMX6Q || SOC_IMX6SL
depends on REGULATOR_ANATOP
help
This adds cpufreq driver support for Freescale i.MX6 series SoCs.
--
1.8.3.2
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 2/2] cpufreq: imx6q-cpufreq driver depends on SOC_IMX6Q/SOC_IMX6SL
2014-01-10 2:39 ` [PATCH v4 2/2] cpufreq: imx6q-cpufreq driver depends on SOC_IMX6Q/SOC_IMX6SL John Tobias
@ 2014-01-13 3:26 ` Shawn Guo
2014-01-13 4:55 ` John Tobias
0 siblings, 1 reply; 8+ messages in thread
From: Shawn Guo @ 2014-01-13 3:26 UTC (permalink / raw)
To: John Tobias
Cc: rjw, viresh.kumar, cpufreq, linux-pm, linux-kernel, kernel,
linux, linux-arm-kernel, festevam
On Thu, Jan 09, 2014 at 06:39:52PM -0800, John Tobias wrote:
> The ARCH_HAS_CPUFREQ, HAVE_IMX_ANATOP and PM_OPP are moved up to ARCH_MCX.
> The driver should show if the SOC_IMX6Q and/or SOC_IMX6SL is/are selected.
>
> Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
> ---
> drivers/cpufreq/Kconfig.arm | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 3ba5dcc..230c663 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -80,7 +80,7 @@ config ARM_HIGHBANK_CPUFREQ
>
> config ARM_IMX6Q_CPUFREQ
> tristate "Freescale i.MX6 cpufreq support"
> - depends on ARCH_MXC
> + depends on SOC_IMX6Q || SOC_IMX6SL
No. We do not want to touch this line where there is another IMX6xx can
reuse the driver. Depending on ARCH_MXC is good enough, since we
already have the symbol prompt and help text to tell the targets that
the driver supports.
Shawn
> depends on REGULATOR_ANATOP
> help
> This adds cpufreq driver support for Freescale i.MX6 series SoCs.
> --
> 1.8.3.2
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 2/2] cpufreq: imx6q-cpufreq driver depends on SOC_IMX6Q/SOC_IMX6SL
2014-01-13 3:26 ` Shawn Guo
@ 2014-01-13 4:55 ` John Tobias
0 siblings, 0 replies; 8+ messages in thread
From: John Tobias @ 2014-01-13 4:55 UTC (permalink / raw)
To: Shawn Guo
Cc: rjw, Viresh Kumar, cpufreq, linux-pm,
<linux-kernel@vger.kernel.org>,
<kernel@pengutronix.de>, <linux@arm.linux.org.uk>,
<linux-arm-kernel@lists.infradead.org>,
Fabio Estevam
That's ok.
On Sun, Jan 12, 2014 at 7:26 PM, Shawn Guo <shawn.guo@linaro.org> wrote:
> On Thu, Jan 09, 2014 at 06:39:52PM -0800, John Tobias wrote:
>> The ARCH_HAS_CPUFREQ, HAVE_IMX_ANATOP and PM_OPP are moved up to ARCH_MCX.
>> The driver should show if the SOC_IMX6Q and/or SOC_IMX6SL is/are selected.
>>
>> Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
>> ---
>> drivers/cpufreq/Kconfig.arm | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
>> index 3ba5dcc..230c663 100644
>> --- a/drivers/cpufreq/Kconfig.arm
>> +++ b/drivers/cpufreq/Kconfig.arm
>> @@ -80,7 +80,7 @@ config ARM_HIGHBANK_CPUFREQ
>>
>> config ARM_IMX6Q_CPUFREQ
>> tristate "Freescale i.MX6 cpufreq support"
>> - depends on ARCH_MXC
>> + depends on SOC_IMX6Q || SOC_IMX6SL
>
> No. We do not want to touch this line where there is another IMX6xx can
> reuse the driver. Depending on ARCH_MXC is good enough, since we
> already have the symbol prompt and help text to tell the targets that
> the driver supports.
>
> Shawn
>
>> depends on REGULATOR_ANATOP
>> help
>> This adds cpufreq driver support for Freescale i.MX6 series SoCs.
>> --
>> 1.8.3.2
>>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support
2014-01-10 2:39 [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support John Tobias
2014-01-10 2:39 ` [PATCH v4 2/2] cpufreq: imx6q-cpufreq driver depends on SOC_IMX6Q/SOC_IMX6SL John Tobias
@ 2014-01-13 3:20 ` Shawn Guo
2014-01-13 4:54 ` John Tobias
1 sibling, 1 reply; 8+ messages in thread
From: Shawn Guo @ 2014-01-13 3:20 UTC (permalink / raw)
To: John Tobias
Cc: rjw, viresh.kumar, cpufreq, linux-pm, linux-kernel, kernel,
linux, linux-arm-kernel, festevam
On Thu, Jan 09, 2014 at 06:39:51PM -0800, John Tobias wrote:
> Moved ARCH_HAS_CPUFREQ, HAVE_IMX_ANATOP and PM_OPP on ARCH_MXC so that
> the user can enable the cpufreq support for iMX6Q and/or iMX6SL.
All I was asking is to move the following:
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select PM_OPP if PM
So leave HAVE_IMX_ANATOP out there, and only move the above ones please.
Shawn
>
> Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
> ---
> arch/arm/mach-imx/Kconfig | 13 ++++++-------
> 1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 7a6e6f7..d6aa34d 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -1,5 +1,6 @@
> config ARCH_MXC
> bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
> + select ARCH_HAS_CPUFREQ
> select ARCH_REQUIRE_GPIOLIB
> select ARM_CPU_SUSPEND if PM
> select ARM_PATCH_PHYS_VIRT
> @@ -9,8 +10,10 @@ config ARCH_MXC
> select GENERIC_ALLOCATOR
> select GENERIC_CLOCKEVENTS
> select GENERIC_IRQ_CHIP
> + select HAVE_IMX_ANATOP if SOC_IMX6Q || SOC_IMX6SL
> select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
> select MULTI_IRQ_HANDLER
> + select PM_OPP if PM
> select SOC_BUS
> select SPARSE_IRQ
> select USE_OF
> @@ -779,16 +782,14 @@ config SOC_IMX53
>
> config SOC_IMX6Q
> bool "i.MX6 Quad/DualLite support"
> - select ARCH_HAS_CPUFREQ
> - select ARCH_HAS_OPP
> + select ARCH_HAS_OPP
> select ARM_ERRATA_754322
> select ARM_ERRATA_764369 if SMP
> select ARM_ERRATA_775420
> select ARM_GIC
> select CPU_V7
> select HAVE_ARM_SCU if SMP
> - select HAVE_ARM_TWD if SMP
> - select HAVE_IMX_ANATOP
> + select HAVE_ARM_TWD if SMP
> select HAVE_IMX_GPC
> select HAVE_IMX_MMDC
> select HAVE_IMX_SRC
> @@ -800,8 +801,7 @@ config SOC_IMX6Q
> select PINCTRL_IMX6Q
> select PL310_ERRATA_588369 if CACHE_PL310
> select PL310_ERRATA_727915 if CACHE_PL310
> - select PL310_ERRATA_769419 if CACHE_PL310
> - select PM_OPP if PM
> + select PL310_ERRATA_769419 if CACHE_PL310
>
> help
> This enables support for Freescale i.MX6 Quad processor.
> @@ -812,7 +812,6 @@ config SOC_IMX6SL
> select ARM_ERRATA_775420
> select ARM_GIC
> select CPU_V7
> - select HAVE_IMX_ANATOP
> select HAVE_IMX_GPC
> select HAVE_IMX_MMDC
> select HAVE_IMX_SRC
> --
> 1.8.3.2
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support
2014-01-13 3:20 ` [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support Shawn Guo
@ 2014-01-13 4:54 ` John Tobias
2014-01-13 6:01 ` Shawn Guo
0 siblings, 1 reply; 8+ messages in thread
From: John Tobias @ 2014-01-13 4:54 UTC (permalink / raw)
To: Shawn Guo
Cc: rjw, Viresh Kumar, cpufreq, linux-pm,
<linux-kernel@vger.kernel.org>,
<kernel@pengutronix.de>, <linux@arm.linux.org.uk>,
<linux-arm-kernel@lists.infradead.org>,
Fabio Estevam
I tested leaving the HAVE_IMX_ANATOP under SOC_IMX6Q and SOC_IMX6SL.
The iMX6Q cpufreq driver won't show up in menu config / gconfig and
that's the reason why I added it.
Regards,
john
On Sun, Jan 12, 2014 at 7:20 PM, Shawn Guo <shawn.guo@linaro.org> wrote:
> On Thu, Jan 09, 2014 at 06:39:51PM -0800, John Tobias wrote:
>> Moved ARCH_HAS_CPUFREQ, HAVE_IMX_ANATOP and PM_OPP on ARCH_MXC so that
>> the user can enable the cpufreq support for iMX6Q and/or iMX6SL.
>
> All I was asking is to move the following:
>
> select ARCH_HAS_CPUFREQ
> select ARCH_HAS_OPP
> select PM_OPP if PM
>
> So leave HAVE_IMX_ANATOP out there, and only move the above ones please.
>
> Shawn
>
>>
>> Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
>> ---
>> arch/arm/mach-imx/Kconfig | 13 ++++++-------
>> 1 file changed, 6 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
>> index 7a6e6f7..d6aa34d 100644
>> --- a/arch/arm/mach-imx/Kconfig
>> +++ b/arch/arm/mach-imx/Kconfig
>> @@ -1,5 +1,6 @@
>> config ARCH_MXC
>> bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
>> + select ARCH_HAS_CPUFREQ
>> select ARCH_REQUIRE_GPIOLIB
>> select ARM_CPU_SUSPEND if PM
>> select ARM_PATCH_PHYS_VIRT
>> @@ -9,8 +10,10 @@ config ARCH_MXC
>> select GENERIC_ALLOCATOR
>> select GENERIC_CLOCKEVENTS
>> select GENERIC_IRQ_CHIP
>> + select HAVE_IMX_ANATOP if SOC_IMX6Q || SOC_IMX6SL
>> select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
>> select MULTI_IRQ_HANDLER
>> + select PM_OPP if PM
>> select SOC_BUS
>> select SPARSE_IRQ
>> select USE_OF
>> @@ -779,16 +782,14 @@ config SOC_IMX53
>>
>> config SOC_IMX6Q
>> bool "i.MX6 Quad/DualLite support"
>> - select ARCH_HAS_CPUFREQ
>> - select ARCH_HAS_OPP
>> + select ARCH_HAS_OPP
>> select ARM_ERRATA_754322
>> select ARM_ERRATA_764369 if SMP
>> select ARM_ERRATA_775420
>> select ARM_GIC
>> select CPU_V7
>> select HAVE_ARM_SCU if SMP
>> - select HAVE_ARM_TWD if SMP
>> - select HAVE_IMX_ANATOP
>> + select HAVE_ARM_TWD if SMP
>> select HAVE_IMX_GPC
>> select HAVE_IMX_MMDC
>> select HAVE_IMX_SRC
>> @@ -800,8 +801,7 @@ config SOC_IMX6Q
>> select PINCTRL_IMX6Q
>> select PL310_ERRATA_588369 if CACHE_PL310
>> select PL310_ERRATA_727915 if CACHE_PL310
>> - select PL310_ERRATA_769419 if CACHE_PL310
>> - select PM_OPP if PM
>> + select PL310_ERRATA_769419 if CACHE_PL310
>>
>> help
>> This enables support for Freescale i.MX6 Quad processor.
>> @@ -812,7 +812,6 @@ config SOC_IMX6SL
>> select ARM_ERRATA_775420
>> select ARM_GIC
>> select CPU_V7
>> - select HAVE_IMX_ANATOP
>> select HAVE_IMX_GPC
>> select HAVE_IMX_MMDC
>> select HAVE_IMX_SRC
>> --
>> 1.8.3.2
>>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support
2014-01-13 4:54 ` John Tobias
@ 2014-01-13 6:01 ` Shawn Guo
2014-01-14 21:37 ` John Tobias
0 siblings, 1 reply; 8+ messages in thread
From: Shawn Guo @ 2014-01-13 6:01 UTC (permalink / raw)
To: John Tobias
Cc: rjw, Viresh Kumar, cpufreq, linux-pm,
<linux-kernel@vger.kernel.org>,
<kernel@pengutronix.de>, <linux@arm.linux.org.uk>,
<linux-arm-kernel@lists.infradead.org>,
Fabio Estevam
On Sun, Jan 12, 2014 at 08:54:18PM -0800, John Tobias wrote:
> I tested leaving the HAVE_IMX_ANATOP under SOC_IMX6Q and SOC_IMX6SL.
> The iMX6Q cpufreq driver won't show up in menu config / gconfig and
> that's the reason why I added it.
I tested the following changes against my for-next branch, and I can see
iMX6Q cpufreq driver in menuconfig. Note, the
drivers/cpufreq/Kconfig.arm change is on cpufreq tree, so I have to make
the change locally for the testing.
Shawn
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 1e70150..7071468 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,7 @@
config ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 ||
ARCH_MULTI_V6_V7
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select ARM_PATCH_PHYS_VIRT
@@ -12,6 +14,7 @@ config ARCH_MXC
select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
select MULTI_IRQ_HANDLER
select PINCTRL
+ select PM_OPP if PM
select SOC_BUS
select SPARSE_IRQ
select USE_OF
@@ -787,8 +790,6 @@ config SOC_IMX53
config SOC_IMX6Q
bool "i.MX6 Quad/DualLite support"
- select ARCH_HAS_CPUFREQ
- select ARCH_HAS_OPP
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
@@ -808,7 +809,6 @@ config SOC_IMX6Q
select PL310_ERRATA_588369 if CACHE_PL310
select PL310_ERRATA_727915 if CACHE_PL310
select PL310_ERRATA_769419 if CACHE_PL310
- select PM_OPP if PM
help
This enables support for Freescale i.MX6 Quad processor.
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index ce52ed9..21e069e 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -80,7 +80,7 @@ config ARM_HIGHBANK_CPUFREQ
config ARM_IMX6Q_CPUFREQ
tristate "Freescale i.MX6Q cpufreq support"
- depends on SOC_IMX6Q
+ depends on ARCH_MXC
depends on REGULATOR_ANATOP
help
This adds cpufreq driver support for Freescale i.MX6Q SOC.
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support
2014-01-13 6:01 ` Shawn Guo
@ 2014-01-14 21:37 ` John Tobias
0 siblings, 0 replies; 8+ messages in thread
From: John Tobias @ 2014-01-14 21:37 UTC (permalink / raw)
To: Shawn Guo
Cc: rjw, Viresh Kumar, cpufreq, linux-pm,
<linux-kernel@vger.kernel.org>,
<kernel@pengutronix.de>, <linux@arm.linux.org.uk>,
<linux-arm-kernel@lists.infradead.org>,
Fabio Estevam
I made a mistake. The HAVE_IMX_ANATOP doesn't require to move up. It
should be ARCH_HAS_OPP.
On Sun, Jan 12, 2014 at 10:01 PM, Shawn Guo <shawn.guo@linaro.org> wrote:
> On Sun, Jan 12, 2014 at 08:54:18PM -0800, John Tobias wrote:
>> I tested leaving the HAVE_IMX_ANATOP under SOC_IMX6Q and SOC_IMX6SL.
>> The iMX6Q cpufreq driver won't show up in menu config / gconfig and
>> that's the reason why I added it.
>
> I tested the following changes against my for-next branch, and I can see
> iMX6Q cpufreq driver in menuconfig. Note, the
> drivers/cpufreq/Kconfig.arm change is on cpufreq tree, so I have to make
> the change locally for the testing.
>
> Shawn
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 1e70150..7071468 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -1,5 +1,7 @@
> config ARCH_MXC
> bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 ||
> ARCH_MULTI_V6_V7
> + select ARCH_HAS_CPUFREQ
> + select ARCH_HAS_OPP
> select ARCH_REQUIRE_GPIOLIB
> select ARM_CPU_SUSPEND if PM
> select ARM_PATCH_PHYS_VIRT
> @@ -12,6 +14,7 @@ config ARCH_MXC
> select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
> select MULTI_IRQ_HANDLER
> select PINCTRL
> + select PM_OPP if PM
> select SOC_BUS
> select SPARSE_IRQ
> select USE_OF
> @@ -787,8 +790,6 @@ config SOC_IMX53
>
> config SOC_IMX6Q
> bool "i.MX6 Quad/DualLite support"
> - select ARCH_HAS_CPUFREQ
> - select ARCH_HAS_OPP
> select ARM_ERRATA_754322
> select ARM_ERRATA_764369 if SMP
> select ARM_ERRATA_775420
> @@ -808,7 +809,6 @@ config SOC_IMX6Q
> select PL310_ERRATA_588369 if CACHE_PL310
> select PL310_ERRATA_727915 if CACHE_PL310
> select PL310_ERRATA_769419 if CACHE_PL310
> - select PM_OPP if PM
>
> help
> This enables support for Freescale i.MX6 Quad processor.
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index ce52ed9..21e069e 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -80,7 +80,7 @@ config ARM_HIGHBANK_CPUFREQ
>
> config ARM_IMX6Q_CPUFREQ
> tristate "Freescale i.MX6Q cpufreq support"
> - depends on SOC_IMX6Q
> + depends on ARCH_MXC
> depends on REGULATOR_ANATOP
> help
> This adds cpufreq driver support for Freescale i.MX6Q SOC.
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-01-14 21:38 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-10 2:39 [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support John Tobias
2014-01-10 2:39 ` [PATCH v4 2/2] cpufreq: imx6q-cpufreq driver depends on SOC_IMX6Q/SOC_IMX6SL John Tobias
2014-01-13 3:26 ` Shawn Guo
2014-01-13 4:55 ` John Tobias
2014-01-13 3:20 ` [PATCH v4 1/2] ARM: imx: add select on ARCH_MXC for cpufreq support Shawn Guo
2014-01-13 4:54 ` John Tobias
2014-01-13 6:01 ` Shawn Guo
2014-01-14 21:37 ` John Tobias
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®