mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ian Campbell <Ian.Campbell@citrix.com>
To: Zoltan Kiss <zoltan.kiss@citrix.com>
Cc: <wei.liu2@citrix.com>, <xen-devel@lists.xenproject.org>,
	<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<jonathan.davies@citrix.com>
Subject: Re: [PATCH net-next v7 4/9] xen-netback: Introduce TX grant mapping
Date: Thu, 13 Mar 2014 10:33:32 +0000	[thread overview]
Message-ID: <1394706812.25873.28.camel@kazak.uk.xensource.com> (raw)
In-Reply-To: <1394142511-14827-5-git-send-email-zoltan.kiss@citrix.com>

On Thu, 2014-03-06 at 21:48 +0000, Zoltan Kiss wrote:
> @@ -135,13 +146,31 @@ struct xenvif {
>  	pending_ring_idx_t pending_cons;
>  	u16 pending_ring[MAX_PENDING_REQS];
>  	struct pending_tx_info pending_tx_info[MAX_PENDING_REQS];
> +	grant_handle_t grant_tx_handle[MAX_PENDING_REQS];
>  
>  	/* Coalescing tx requests before copying makes number of grant
>  	 * copy ops greater or equal to number of slots required. In
>  	 * worst case a tx request consumes 2 gnttab_copy.
>  	 */
>  	struct gnttab_copy tx_copy_ops[2*MAX_PENDING_REQS];
> -
> +	struct gnttab_map_grant_ref tx_map_ops[MAX_PENDING_REQS];
> +	struct gnttab_unmap_grant_ref tx_unmap_ops[MAX_PENDING_REQS];

I wonder if we should break some of these arrays into separate
allocations? Wasn't there a problem with sizeof(struct xenvif) at one
point?

> diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
> index bc32627..1fe9fe5 100644
> --- a/drivers/net/xen-netback/interface.c
> +++ b/drivers/net/xen-netback/interface.c
> @@ -493,6 +533,23 @@ void xenvif_disconnect(struct xenvif *vif)
>  
>  void xenvif_free(struct xenvif *vif)
>  {
> +	int i, unmap_timeout = 0;
> +
> +	for (i = 0; i < MAX_PENDING_REQS; ++i) {
> +		if (vif->grant_tx_handle[i] != NETBACK_INVALID_HANDLE) {
> +			unmap_timeout++;
> +			schedule_timeout(msecs_to_jiffies(1000));
> +			if (unmap_timeout > 9 &&
> +			    net_ratelimit())

Does this really reach 80 columns when unwrapped?

(there seems to my eye to be a lot of overaggressive wrapping in this
patch, but nevermind)

> +				netdev_err(vif->dev,
> +					   "Page still granted! Index: %x\n",
> +					   i);
> +			i = -1;

Should there not be a break here? Otherwise don't we restart the for
loop from 0 again? If that is intentional then a comment would be very
useful.

> @@ -919,11 +873,38 @@ err:
>  	return NULL;
>  }
>  
> +static inline void xenvif_grant_handle_set(struct xenvif *vif,
> +					   u16 pending_idx,
> +					   grant_handle_t handle)
> +{
> +	if (unlikely(vif->grant_tx_handle[pending_idx] !=
> +		     NETBACK_INVALID_HANDLE)) {
> +		netdev_err(vif->dev,

Is this in any way guest triggerable? Needs to be ratelimited in that
case (and arguably even if not?)

> +			   "Trying to overwrite active handle! pending_idx: %x\n",
> +			   pending_idx);
> +		BUG();
> +	}
> +	vif->grant_tx_handle[pending_idx] = handle;
> +}
> +
> +static inline void xenvif_grant_handle_reset(struct xenvif *vif,
> +					     u16 pending_idx)
> +{
> +	if (unlikely(vif->grant_tx_handle[pending_idx] ==
> +		     NETBACK_INVALID_HANDLE)) {
> +		netdev_err(vif->dev,

Likewise.

> +			   "Trying to unmap invalid handle! pending_idx: %x\n",
> +			   pending_idx);
> +		BUG();
> +	}
> +	vif->grant_tx_handle[pending_idx] = NETBACK_INVALID_HANDLE;
> +}
> +
> @@ -1001,6 +982,17 @@ static void xenvif_fill_frags(struct xenvif *vif, struct sk_buff *skb)
>  
>  		pending_idx = frag_get_pending_idx(frag);
>  
> +		/* If this is not the first frag, chain it to the previous*/
> +		if (unlikely(prev_pending_idx == INVALID_PENDING_IDX))
> +			skb_shinfo(skb)->destructor_arg =
> +				&vif->pending_tx_info[pending_idx].callback_struct;
> +		else if (likely(pending_idx != prev_pending_idx))
> +			vif->pending_tx_info[prev_pending_idx].callback_struct.ctx =
> +				&(vif->pending_tx_info[pending_idx].callback_struct);

#define callback_for(vif, pending_idx) .... would make this and a bunch
of other places a lot less verbose IMHO.

> +		index = pending_index(vif->pending_prod);
> +		vif->pending_ring[index] = pending_idx;
> +		/* TX shouldn't use the index before we give it back here */

I hope this comment refers to the pending_prod++ and not the mb(), since
the barrier only guarantees visibility after that point, but not
invisibility before this point.

[...]
> +	/* Btw. already unmapped? */

What does this comment mean? Is it a fixme? An indicator that
xenvif_grant_handle_reset is supposed to handle this case or something
else?

I think there was another such comment earlier too.

> +	xenvif_grant_handle_reset(vif, pending_idx);
> +
> +	ret = gnttab_unmap_refs(&tx_unmap_op, NULL,
> +				&vif->mmap_pages[pending_idx], 1);
> +	BUG_ON(ret);
> +
> +	xenvif_idx_release(vif, pending_idx, XEN_NETIF_RSP_OKAY);
> +}
> +
>  static inline int rx_work_todo(struct xenvif *vif)
>  {
>  	return !skb_queue_empty(&vif->rx_queue) &&



  parent reply	other threads:[~2014-03-13 10:33 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-06 21:48 [PATCH net-next v7 0/9] xen-netback: TX grant mapping with SKBTX_DEV_ZEROCOPY instead of copy Zoltan Kiss
2014-03-06 21:48 ` [PATCH net-next v7 1/9] xen-netback: Use skb->cb for pending_idx Zoltan Kiss
2014-03-06 21:48 ` [PATCH net-next v7 2/9] xen-netback: Minor refactoring of netback code Zoltan Kiss
2014-03-06 21:48 ` [PATCH net-next v7 3/9] xen-netback: Handle foreign mapped pages on the guest RX path Zoltan Kiss
2014-03-06 21:48 ` [PATCH net-next v7 4/9] xen-netback: Introduce TX grant mapping Zoltan Kiss
2014-03-13 10:17   ` Ian Campbell
2014-03-13 12:34     ` Zoltan Kiss
2014-03-13 10:33   ` Ian Campbell [this message]
2014-03-13 10:56     ` [Xen-devel] " David Vrabel
2014-03-13 11:02       ` Ian Campbell
2014-03-13 11:09         ` David Vrabel
2014-03-13 11:13         ` Wei Liu
2014-03-13 13:17     ` Zoltan Kiss
2014-03-13 13:56       ` Ian Campbell
2014-03-13 17:43         ` Zoltan Kiss
2014-03-06 21:48 ` [PATCH net-next v7 5/9] xen-netback: Remove old TX grant copy definitons and fix indentations Zoltan Kiss
2014-03-06 21:48 ` [PATCH net-next v7 6/9] xen-netback: Add stat counters for zerocopy Zoltan Kiss
2014-03-06 21:48 ` [PATCH net-next v7 7/9] xen-netback: Handle guests with too many frags Zoltan Kiss
2014-03-06 21:48 ` [PATCH net-next v7 8/9] xen-netback: Timeout packets in RX path Zoltan Kiss
2014-03-13 10:39   ` Ian Campbell
2014-03-06 21:48 ` [PATCH net-next v7 9/9] xen-netback: Aggregate TX unmap operations Zoltan Kiss
2014-03-19 21:16   ` Zoltan Kiss
2014-03-20  9:53     ` Paul Durrant
2014-03-20 10:48     ` Wei Liu
2014-03-20 11:14       ` Paul Durrant
2014-03-20 12:38         ` Wei Liu
2014-03-20 16:11           ` Zoltan Kiss
2014-03-07 21:05 ` [PATCH net-next v7 0/9] xen-netback: TX grant mapping with SKBTX_DEV_ZEROCOPY instead of copy David Miller
2014-03-08 14:37   ` Zoltan Kiss
2014-03-08 23:57     ` David Miller
2014-03-10 10:15       ` Wei Liu
2014-03-12 15:40       ` Ian Campbell
2014-03-12 18:49         ` Zoltan Kiss
2014-03-13 10:43         ` Ian Campbell
2014-03-13 10:08 ` Ian Campbell
2014-03-13 18:23   ` Zoltan Kiss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1394706812.25873.28.camel@kazak.uk.xensource.com \
    --to=ian.campbell@citrix.com \
    --cc=jonathan.davies@citrix.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xenproject.org \
    --cc=zoltan.kiss@citrix.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®