From: Chanwoo Choi <cw00.choi@samsung.com>
To: linux-kernel@vger.kernel.org
Cc: myungjoo.ham@samsung.com, balbi@ti.com, gg@slimlogic.co.uk,
kishon@ti.com, ckeepax@opensource.wolfsonmicro.com,
broonie@kernel.org, k.kozlowski@samsung.com,
kyungmin.park@samsung.com, Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCHv3 8/9] extcon: gpio: Use devm_extcon_dev_allocate for extcon_dev
Date: Thu, 24 Apr 2014 21:34:56 +0900 [thread overview]
Message-ID: <1398342897-23670-9-git-send-email-cw00.choi@samsung.com> (raw)
In-Reply-To: <1398342897-23670-1-git-send-email-cw00.choi@samsung.com>
This patch use devm_extcon_dev_allocate() to simplify the memory control
of extcon device.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
drivers/extcon/extcon-gpio.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 43af34c..41e2157 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -32,7 +32,7 @@
#include <linux/extcon/extcon-gpio.h>
struct gpio_extcon_data {
- struct extcon_dev edev;
+ struct extcon_dev *edev;
unsigned gpio;
bool gpio_active_low;
const char *state_on;
@@ -53,7 +53,7 @@ static void gpio_extcon_work(struct work_struct *work)
state = gpio_get_value(data->gpio);
if (data->gpio_active_low)
state = !state;
- extcon_set_state(&data->edev, state);
+ extcon_set_state(data->edev, state);
}
static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
@@ -67,9 +67,10 @@ static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf)
{
- struct gpio_extcon_data *extcon_data =
- container_of(edev, struct gpio_extcon_data, edev);
+ struct device *dev = edev->dev.parent;
+ struct gpio_extcon_data *extcon_data = dev_get_drvdata(dev);
const char *state;
+
if (extcon_get_state(edev))
state = extcon_data->state_on;
else
@@ -98,15 +99,21 @@ static int gpio_extcon_probe(struct platform_device *pdev)
if (!extcon_data)
return -ENOMEM;
- extcon_data->edev.name = pdata->name;
- extcon_data->edev.dev.parent = &pdev->dev;
+ extcon_data->edev = devm_extcon_dev_allocate(&pdev->dev, NULL);
+ if (!extcon_data->edev) {
+ dev_err(&pdev->dev, "failed to allocate extcon device\n");
+ return -ENOMEM;
+ }
+ extcon_data->edev->name = pdata->name;
+ extcon_data->edev->dev.parent = &pdev->dev;
+
extcon_data->gpio = pdata->gpio;
extcon_data->gpio_active_low = pdata->gpio_active_low;
extcon_data->state_on = pdata->state_on;
extcon_data->state_off = pdata->state_off;
extcon_data->check_on_resume = pdata->check_on_resume;
if (pdata->state_on && pdata->state_off)
- extcon_data->edev.print_state = extcon_gpio_print_state;
+ extcon_data->edev->print_state = extcon_gpio_print_state;
ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
pdev->name);
@@ -121,7 +128,7 @@ static int gpio_extcon_probe(struct platform_device *pdev)
msecs_to_jiffies(pdata->debounce);
}
- ret = devm_extcon_dev_register(&pdev->dev, &extcon_data->edev);
+ ret = devm_extcon_dev_register(&pdev->dev, extcon_data->edev);
if (ret < 0)
return ret;
--
1.8.0
next prev parent reply other threads:[~2014-04-24 12:35 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-24 12:34 [PATCHv3 0/9] extcon: Support devm_extcon_dev_allocate/free() Chanwoo Choi
2014-04-24 12:34 ` [PATCHv3 1/9] extcon: Add extcon_dev_allocate/free() to control the memory of extcon device Chanwoo Choi
2014-04-24 14:42 ` Felipe Balbi
2014-04-24 14:58 ` Chanwoo Choi
2014-04-24 15:03 ` Felipe Balbi
2014-04-24 15:06 ` Chanwoo Choi
2014-04-24 12:34 ` [PATCHv3 2/9] extcon: Add devm_extcon_dev_allocate/free to manage the resource " Chanwoo Choi
2014-04-24 14:44 ` Felipe Balbi
2014-04-24 15:03 ` Chanwoo Choi
2014-04-24 15:06 ` Felipe Balbi
2014-04-24 15:10 ` Chanwoo Choi
2014-04-24 12:34 ` [PATCHv3 3/9] extcon: max8997: Use devm_extcon_dev_allocate for extcon_dev Chanwoo Choi
2014-04-24 14:45 ` Felipe Balbi
2014-04-24 15:11 ` Chanwoo Choi
2014-04-24 12:34 ` [PATCHv3 4/9] extcon: max77693: " Chanwoo Choi
2014-04-24 12:34 ` [PATCHv3 5/9] extcon: max14577: " Chanwoo Choi
2014-04-24 12:34 ` [PATCHv3 6/9] extcon: arizona: " Chanwoo Choi
2014-04-24 12:34 ` [PATCHv3 7/9] extcon: adc-jack: " Chanwoo Choi
2014-04-24 12:34 ` Chanwoo Choi [this message]
2014-04-24 12:34 ` [PATCHv3 9/9] extcon: palmas: " Chanwoo Choi
2014-04-24 14:47 ` Felipe Balbi
2014-04-24 15:13 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398342897-23670-9-git-send-email-cw00.choi@samsung.com \
--to=cw00.choi@samsung.com \
--cc=balbi@ti.com \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=gg@slimlogic.co.uk \
--cc=k.kozlowski@samsung.com \
--cc=kishon@ti.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®