From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Vinod Koul <vinod.koul@intel.com>, dmaengine@vger.kernel.org
Cc: "Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
"Antoine Ténart" <antoine@free-electrons.com>,
lars@metafoo.de,
"Maxime Ripard" <maxime.ripard@free-electrons.com>
Subject: [PATCH 9/9] dmaengine: sun6i: Convert to generic slave_caps
Date: Sat, 27 Sep 2014 10:54:45 +0200 [thread overview]
Message-ID: <1411808085-27792-10-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1411808085-27792-1-git-send-email-maxime.ripard@free-electrons.com>
Convert the Allwinner A31 driver to the callbacks that have been introduced
before, in order to support calls to retrieve slave capabilities.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/dma/sun6i-dma.c | 158 ++++++++++++++++++++++++++----------------------
1 file changed, 86 insertions(+), 72 deletions(-)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 1f92a56fd2b6..447de4d42251 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -358,38 +358,6 @@ static void sun6i_dma_free_desc(struct virt_dma_desc *vd)
kfree(txd);
}
-static int sun6i_dma_terminate_all(struct sun6i_vchan *vchan)
-{
- struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
- struct sun6i_pchan *pchan = vchan->phy;
- unsigned long flags;
- LIST_HEAD(head);
-
- spin_lock(&sdev->lock);
- list_del_init(&vchan->node);
- spin_unlock(&sdev->lock);
-
- spin_lock_irqsave(&vchan->vc.lock, flags);
-
- vchan_get_all_descriptors(&vchan->vc, &head);
-
- if (pchan) {
- writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
- writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
-
- vchan->phy = NULL;
- pchan->vchan = NULL;
- pchan->desc = NULL;
- pchan->done = NULL;
- }
-
- spin_unlock_irqrestore(&vchan->vc.lock, flags);
-
- vchan_dma_desc_free_list(&vchan->vc, &head);
-
- return 0;
-}
-
static int sun6i_dma_start_desc(struct sun6i_vchan *vchan)
{
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
@@ -673,57 +641,92 @@ err_lli_free:
return NULL;
}
-static int sun6i_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
- unsigned long arg)
+static int sun6i_dma_config(struct dma_chan *chan,
+ struct dma_slave_config *config)
+{
+ struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+
+ memcpy(&vchan->cfg, config, sizeof(*config));
+
+ return 0;
+}
+
+static int sun6i_dma_pause(struct dma_chan *chan)
+{
+ struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+ struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+ struct sun6i_pchan *pchan = vchan->phy;
+
+ dev_dbg(chan2dev(chan), "vchan %p: pause\n", &vchan->vc);
+
+ if (pchan) {
+ writel(DMA_CHAN_PAUSE_PAUSE,
+ pchan->base + DMA_CHAN_PAUSE);
+ } else {
+ spin_lock(&sdev->lock);
+ list_del_init(&vchan->node);
+ spin_unlock(&sdev->lock);
+ }
+
+ return 0;
+}
+
+static int sun6i_dma_resume(struct dma_chan *chan)
{
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
struct sun6i_pchan *pchan = vchan->phy;
unsigned long flags;
- int ret = 0;
- switch (cmd) {
- case DMA_RESUME:
- dev_dbg(chan2dev(chan), "vchan %p: resume\n", &vchan->vc);
+ dev_dbg(chan2dev(chan), "vchan %p: resume\n", &vchan->vc);
- spin_lock_irqsave(&vchan->vc.lock, flags);
+ spin_lock_irqsave(&vchan->vc.lock, flags);
- if (pchan) {
- writel(DMA_CHAN_PAUSE_RESUME,
- pchan->base + DMA_CHAN_PAUSE);
- } else if (!list_empty(&vchan->vc.desc_issued)) {
- spin_lock(&sdev->lock);
- list_add_tail(&vchan->node, &sdev->pending);
- spin_unlock(&sdev->lock);
- }
+ if (pchan) {
+ writel(DMA_CHAN_PAUSE_RESUME,
+ pchan->base + DMA_CHAN_PAUSE);
+ } else if (!list_empty(&vchan->vc.desc_issued)) {
+ spin_lock(&sdev->lock);
+ list_add_tail(&vchan->node, &sdev->pending);
+ spin_unlock(&sdev->lock);
+ }
- spin_unlock_irqrestore(&vchan->vc.lock, flags);
- break;
+ spin_unlock_irqrestore(&vchan->vc.lock, flags);
- case DMA_PAUSE:
- dev_dbg(chan2dev(chan), "vchan %p: pause\n", &vchan->vc);
+ return 0;
+}
- if (pchan) {
- writel(DMA_CHAN_PAUSE_PAUSE,
- pchan->base + DMA_CHAN_PAUSE);
- } else {
- spin_lock(&sdev->lock);
- list_del_init(&vchan->node);
- spin_unlock(&sdev->lock);
- }
- break;
+static int sun6i_dma_terminate_all(struct dma_chan *chan)
+{
+ struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+ struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+ struct sun6i_pchan *pchan = vchan->phy;
+ unsigned long flags;
+ LIST_HEAD(head);
- case DMA_TERMINATE_ALL:
- ret = sun6i_dma_terminate_all(vchan);
- break;
- case DMA_SLAVE_CONFIG:
- memcpy(&vchan->cfg, (void *)arg, sizeof(struct dma_slave_config));
- break;
- default:
- ret = -ENXIO;
- break;
+ spin_lock(&sdev->lock);
+ list_del_init(&vchan->node);
+ spin_unlock(&sdev->lock);
+
+ spin_lock_irqsave(&vchan->vc.lock, flags);
+
+ vchan_get_all_descriptors(&vchan->vc, &head);
+
+ if (pchan) {
+ writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
+ writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
+
+ vchan->phy = NULL;
+ pchan->vchan = NULL;
+ pchan->desc = NULL;
+ pchan->done = NULL;
}
- return ret;
+
+ spin_unlock_irqrestore(&vchan->vc.lock, flags);
+
+ vchan_dma_desc_free_list(&vchan->vc, &head);
+
+ return 0;
}
static enum dma_status sun6i_dma_tx_status(struct dma_chan *chan,
@@ -936,9 +939,20 @@ static int sun6i_dma_probe(struct platform_device *pdev)
sdc->slave.device_issue_pending = sun6i_dma_issue_pending;
sdc->slave.device_prep_slave_sg = sun6i_dma_prep_slave_sg;
sdc->slave.device_prep_dma_memcpy = sun6i_dma_prep_dma_memcpy;
- sdc->slave.device_control = sun6i_dma_control;
+ sdc->slave.device_config = sun6i_dma_config;
+ sdc->slave.device_pause = sun6i_dma_pause;
+ sdc->slave.device_resume = sun6i_dma_resume;
+ sdc->slave.device_terminate_all = sun6i_dma_terminate_all;
sdc->slave.chancnt = NR_MAX_VCHANS;
-
+ sdc->slave.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ sdc->slave.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ sdc->slave.directions = BIT(DMA_DEV_TO_MEM) |
+ BIT(DMA_MEM_TO_DEV);
+ sdc->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
sdc->slave.dev = &pdev->dev;
sdc->pchans = devm_kcalloc(&pdev->dev, NR_MAX_CHANNELS,
--
2.1.0
prev parent reply other threads:[~2014-09-27 8:57 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-27 8:54 [PATCH 0/9] dmaengine: Implement generic slave capabilities retrieval Maxime Ripard
2014-09-27 8:54 ` [PATCH 1/9] dmaengine: Make the destination abbreviation coherent Maxime Ripard
2014-09-27 8:54 ` [PATCH 2/9] dmaengine: Make channel allocation callbacks optional Maxime Ripard
2014-09-28 16:07 ` Vinod Koul
2014-10-01 8:39 ` Maxime Ripard
2014-09-27 8:54 ` [PATCH 3/9] dmaengine: Introduce a device_config callback Maxime Ripard
2014-09-28 16:13 ` Vinod Koul
2014-09-28 16:14 ` Vinod Koul
2014-09-27 8:54 ` [PATCH 4/9] dmaengine: split out pause/resume operations from device_control Maxime Ripard
2014-09-27 8:54 ` [PATCH 5/9] dmaengine: Add device_terminate_all callback Maxime Ripard
2014-09-27 8:54 ` [PATCH 6/9] dmaengine: Create a generic dma_slave_caps callback Maxime Ripard
2014-09-27 9:25 ` Russell King - ARM Linux
2014-10-01 8:21 ` Maxime Ripard
2014-09-27 8:54 ` [PATCH 7/9] dmaengine: Move slave caps to dma_device Maxime Ripard
2014-09-27 9:28 ` Russell King - ARM Linux
2014-10-01 8:27 ` Maxime Ripard
2014-10-01 8:55 ` Russell King - ARM Linux
2014-09-27 8:54 ` [PATCH 8/9] dmaengine: Mark device_control as deprecated Maxime Ripard
2014-09-27 8:54 ` Maxime Ripard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411808085-27792-10-git-send-email-maxime.ripard@free-electrons.com \
--to=maxime.ripard@free-electrons.com \
--cc=antoine@free-electrons.com \
--cc=dmaengine@vger.kernel.org \
--cc=lars@metafoo.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®