From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Vinod Koul <vinod.koul@intel.com>, dmaengine@vger.kernel.org
Cc: "Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
"Antoine Ténart" <antoine@free-electrons.com>,
lars@metafoo.de,
"Maxime Ripard" <maxime.ripard@free-electrons.com>
Subject: [PATCH 1/9] dmaengine: Make the destination abbreviation coherent
Date: Sat, 27 Sep 2014 10:54:37 +0200 [thread overview]
Message-ID: <1411808085-27792-2-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1411808085-27792-1-git-send-email-maxime.ripard@free-electrons.com>
The dmaengine header abbreviates destination as at least two different strings.
Make a coherent use of a single one.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/dma/bcm2835-dma.c | 2 +-
drivers/dma/edma.c | 2 +-
drivers/dma/fsl-edma.c | 2 +-
drivers/dma/omap-dma.c | 2 +-
drivers/dma/pl330.c | 2 +-
drivers/dma/sirf-dma.c | 2 +-
include/linux/dmaengine.h | 12 ++++++------
7 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c
index 68007974961a..8a6a9c27fe83 100644
--- a/drivers/dma/bcm2835-dma.c
+++ b/drivers/dma/bcm2835-dma.c
@@ -571,7 +571,7 @@ static int bcm2835_dma_device_slave_caps(struct dma_chan *dchan,
struct dma_slave_caps *caps)
{
caps->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
- caps->dstn_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ caps->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
caps->cmd_pause = false;
caps->cmd_terminate = true;
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 7b65633f495e..b3d641881d9d 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -998,7 +998,7 @@ static int edma_dma_device_slave_caps(struct dma_chan *dchan,
struct dma_slave_caps *caps)
{
caps->src_addr_widths = EDMA_DMA_BUSWIDTHS;
- caps->dstn_addr_widths = EDMA_DMA_BUSWIDTHS;
+ caps->dst_addr_widths = EDMA_DMA_BUSWIDTHS;
caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
caps->cmd_pause = true;
caps->cmd_terminate = true;
diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c
index 3c5711d5fe97..13df85a16438 100644
--- a/drivers/dma/fsl-edma.c
+++ b/drivers/dma/fsl-edma.c
@@ -781,7 +781,7 @@ static int fsl_dma_device_slave_caps(struct dma_chan *dchan,
struct dma_slave_caps *caps)
{
caps->src_addr_widths = FSL_EDMA_BUSWIDTHS;
- caps->dstn_addr_widths = FSL_EDMA_BUSWIDTHS;
+ caps->dst_addr_widths = FSL_EDMA_BUSWIDTHS;
caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
caps->cmd_pause = true;
caps->cmd_terminate = true;
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index 4cf7d9a950d7..51dee6636a37 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -1095,7 +1095,7 @@ static int omap_dma_device_slave_caps(struct dma_chan *dchan,
struct dma_slave_caps *caps)
{
caps->src_addr_widths = OMAP_DMA_BUSWIDTHS;
- caps->dstn_addr_widths = OMAP_DMA_BUSWIDTHS;
+ caps->dst_addr_widths = OMAP_DMA_BUSWIDTHS;
caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
caps->cmd_pause = true;
caps->cmd_terminate = true;
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index d5149aacd2fe..8904891ed5d5 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2583,7 +2583,7 @@ static int pl330_dma_device_slave_caps(struct dma_chan *dchan,
struct dma_slave_caps *caps)
{
caps->src_addr_widths = PL330_DMA_BUSWIDTHS;
- caps->dstn_addr_widths = PL330_DMA_BUSWIDTHS;
+ caps->dst_addr_widths = PL330_DMA_BUSWIDTHS;
caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
caps->cmd_pause = false;
caps->cmd_terminate = true;
diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c
index aac03ab10c54..149d7fddfa75 100644
--- a/drivers/dma/sirf-dma.c
+++ b/drivers/dma/sirf-dma.c
@@ -652,7 +652,7 @@ static int sirfsoc_dma_device_slave_caps(struct dma_chan *dchan,
struct dma_slave_caps *caps)
{
caps->src_addr_widths = SIRFSOC_DMA_BUSWIDTHS;
- caps->dstn_addr_widths = SIRFSOC_DMA_BUSWIDTHS;
+ caps->dst_addr_widths = SIRFSOC_DMA_BUSWIDTHS;
caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
caps->cmd_pause = true;
caps->cmd_terminate = true;
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 1f9e642c66ad..f4b71ce1a0a6 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -388,7 +388,7 @@ enum dma_residue_granularity {
/* struct dma_slave_caps - expose capabilities of a slave channel only
*
* @src_addr_widths: bit mask of src addr widths the channel supports
- * @dstn_addr_widths: bit mask of dstn addr widths the channel supports
+ * @dst_addr_widths: bit mask of dstn addr widths the channel supports
* @directions: bit mask of slave direction the channel supported
* since the enum dma_transfer_direction is not defined as bits for each
* type of direction, the dma controller should fill (1 << <TYPE>) and same
@@ -399,7 +399,7 @@ enum dma_residue_granularity {
*/
struct dma_slave_caps {
u32 src_addr_widths;
- u32 dstn_addr_widths;
+ u32 dst_addr_widths;
u32 directions;
bool cmd_pause;
bool cmd_terminate;
@@ -639,10 +639,10 @@ struct dma_device {
void (*device_free_chan_resources)(struct dma_chan *chan);
struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
- struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+ struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
size_t len, unsigned long flags);
struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
- struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
+ struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src,
unsigned int src_cnt, size_t len, unsigned long flags);
struct dma_async_tx_descriptor *(*device_prep_dma_xor_val)(
struct dma_chan *chan, dma_addr_t *src, unsigned int src_cnt,
@@ -935,11 +935,11 @@ async_dma_find_channel(enum dma_transaction_type type)
#endif /* CONFIG_ASYNC_TX_DMA */
dma_cookie_t dma_async_memcpy_buf_to_buf(struct dma_chan *chan,
- void *dest, void *src, size_t len);
+ void *dst, void *src, size_t len);
dma_cookie_t dma_async_memcpy_buf_to_pg(struct dma_chan *chan,
struct page *page, unsigned int offset, void *kdata, size_t len);
dma_cookie_t dma_async_memcpy_pg_to_pg(struct dma_chan *chan,
- struct page *dest_pg, unsigned int dest_off, struct page *src_pg,
+ struct page *dst_pg, unsigned int dst_off, struct page *src_pg,
unsigned int src_off, size_t len);
void dma_async_tx_descriptor_init(struct dma_async_tx_descriptor *tx,
struct dma_chan *chan);
--
2.1.0
next prev parent reply other threads:[~2014-09-27 8:55 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-27 8:54 [PATCH 0/9] dmaengine: Implement generic slave capabilities retrieval Maxime Ripard
2014-09-27 8:54 ` Maxime Ripard [this message]
2014-09-27 8:54 ` [PATCH 2/9] dmaengine: Make channel allocation callbacks optional Maxime Ripard
2014-09-28 16:07 ` Vinod Koul
2014-10-01 8:39 ` Maxime Ripard
2014-09-27 8:54 ` [PATCH 3/9] dmaengine: Introduce a device_config callback Maxime Ripard
2014-09-28 16:13 ` Vinod Koul
2014-09-28 16:14 ` Vinod Koul
2014-09-27 8:54 ` [PATCH 4/9] dmaengine: split out pause/resume operations from device_control Maxime Ripard
2014-09-27 8:54 ` [PATCH 5/9] dmaengine: Add device_terminate_all callback Maxime Ripard
2014-09-27 8:54 ` [PATCH 6/9] dmaengine: Create a generic dma_slave_caps callback Maxime Ripard
2014-09-27 9:25 ` Russell King - ARM Linux
2014-10-01 8:21 ` Maxime Ripard
2014-09-27 8:54 ` [PATCH 7/9] dmaengine: Move slave caps to dma_device Maxime Ripard
2014-09-27 9:28 ` Russell King - ARM Linux
2014-10-01 8:27 ` Maxime Ripard
2014-10-01 8:55 ` Russell King - ARM Linux
2014-09-27 8:54 ` [PATCH 8/9] dmaengine: Mark device_control as deprecated Maxime Ripard
2014-09-27 8:54 ` [PATCH 9/9] dmaengine: sun6i: Convert to generic slave_caps Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411808085-27792-2-git-send-email-maxime.ripard@free-electrons.com \
--to=maxime.ripard@free-electrons.com \
--cc=antoine@free-electrons.com \
--cc=dmaengine@vger.kernel.org \
--cc=lars@metafoo.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®