mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: LKML <linux-kernel@vger.kernel.org>,
	Benoit Cousson <bcousson@baylibre.com>,
	Patrick Titiano <ptitiano@baylibre.com>,
	LM Sensors <lm-sensors@lm-sensors.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH v2 2/3] hwmon: tmp401: add TMP435 to the list of supported chips in docs and Kconfig
Date: Thu,  4 Dec 2014 16:22:53 +0100	[thread overview]
Message-ID: <1417706574-1023-3-git-send-email-bgolaszewski@baylibre.com> (raw)
In-Reply-To: <1417706574-1023-1-git-send-email-bgolaszewski@baylibre.com>

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 Documentation/hwmon/tmp401 | 8 ++++++--
 drivers/hwmon/Kconfig      | 2 +-
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401
index f91e3fa..445ff7b 100644
--- a/Documentation/hwmon/tmp401
+++ b/Documentation/hwmon/tmp401
@@ -18,6 +18,10 @@ Supported chips:
     Prefix: 'tmp432'
     Addresses scanned: I2C 0x4c, 0x4d
     Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html
+  * Texas Instruments TMP435
+    Prefix: 'tmp435'
+    Addresses scanned: I2C 0x4c
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html
 
 Authors:
          Hans de Goede <hdegoede@redhat.com>
@@ -27,8 +31,8 @@ Description
 -----------
 
 This driver implements support for Texas Instruments TMP401, TMP411,
-TMP431, and TMP432 chips. These chips implement one or two remote and
-one local temperature sensors. Temperature is measured in degrees
+TMP431, TMP432 and TMP435 chips. These chips implement one or two remote
+and one local temperature sensors. Temperature is measured in degrees
 Celsius. Resolution of the remote sensor is 0.0625 degree. Local
 sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
 supported by the driver so far, so using the default resolution of 0.5
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index b1ce6a0..6529c09 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1466,7 +1466,7 @@ config SENSORS_TMP401
 	depends on I2C
 	help
 	  If you say yes here you get support for Texas Instruments TMP401,
-	  TMP411, TMP431, and TMP432 temperature sensor chips.
+	  TMP411, TMP431, TMP432 and TMP435 temperature sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called tmp401.
-- 
2.1.3


  parent reply	other threads:[~2014-12-04 15:23 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-04 15:22 [PATCH v2 0/3] hwmon: tmp401: support for TMP435 and fix for a probe issue Bartosz Golaszewski
2014-12-04 15:22 ` [PATCH v2 1/3] hwmon: tmp401: add support for TI TMP435 Bartosz Golaszewski
2014-12-04 16:23   ` Guenter Roeck
2014-12-04 15:22 ` Bartosz Golaszewski [this message]
2014-12-04 15:22 ` [PATCH v2 3/3] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors Bartosz Golaszewski
2014-12-04 16:25   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1417706574-1023-3-git-send-email-bgolaszewski@baylibre.com \
    --to=bgolaszewski@baylibre.com \
    --cc=bcousson@baylibre.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lm-sensors@lm-sensors.org \
    --cc=ptitiano@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome