From: Guenter Roeck <linux@roeck-us.net>
To: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
Benoit Cousson <bcousson@baylibre.com>,
Patrick Titiano <ptitiano@baylibre.com>,
LM Sensors <lm-sensors@lm-sensors.org>
Subject: Re: [PATCH v2 1/3] hwmon: tmp401: add support for TI TMP435
Date: Thu, 4 Dec 2014 08:23:18 -0800 [thread overview]
Message-ID: <20141204162318.GC7385@roeck-us.net> (raw)
In-Reply-To: <1417706574-1023-2-git-send-email-bgolaszewski@baylibre.com>
On Thu, Dec 04, 2014 at 04:22:52PM +0100, Bartosz Golaszewski wrote:
> From: Patrick Titiano <ptitiano@baylibre.com>
>
> Signed-off-by: Patrick Titiano <ptitiano@baylibre.com>
> [Bartosz Golaszewski: prepared for submission, code review fixes]
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> drivers/hwmon/tmp401.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
> index 7fa6e7d..a5f0973 100644
> --- a/drivers/hwmon/tmp401.c
> +++ b/drivers/hwmon/tmp401.c
> @@ -8,6 +8,9 @@
> * Cleanup and support for TMP431 and TMP432 by Guenter Roeck
> * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
> *
> + * Support for TMP435 by Patrick Titiano
> + * Copyright (c) 2014 Patrick Titiano <ptitiano@baylibre.com>
> + *
Really ?
Adding a copyright for a couple of device detection lines is excessive
and highly unusual. I'll have to think hard about this.
Guenter
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> * the Free Software Foundation; either version 2 of the License, or
> @@ -46,7 +49,7 @@
> /* Addresses to scan */
> static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
>
> -enum chips { tmp401, tmp411, tmp431, tmp432 };
> +enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
>
> /*
> * The TMP401 registers, note some registers have different addresses for
> @@ -136,6 +139,7 @@ static const u8 TMP432_STATUS_REG[] = {
> #define TMP411C_DEVICE_ID 0x10
> #define TMP431_DEVICE_ID 0x31
> #define TMP432_DEVICE_ID 0x32
> +#define TMP435_DEVICE_ID 0x35
>
> /*
> * Driver data (common to all clients)
> @@ -146,6 +150,7 @@ static const struct i2c_device_id tmp401_id[] = {
> { "tmp411", tmp411 },
> { "tmp431", tmp431 },
> { "tmp432", tmp432 },
> + { "tmp435", tmp435 },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, tmp401_id);
> @@ -684,6 +689,11 @@ static int tmp401_detect(struct i2c_client *client,
> return -ENODEV;
> kind = tmp432;
> break;
> + case TMP435_DEVICE_ID:
> + if (client->addr != 0x4c)
> + return -ENODEV;
> + kind = tmp435;
> + break;
> default:
> return -ENODEV;
> }
> @@ -705,7 +715,9 @@ static int tmp401_detect(struct i2c_client *client,
> static int tmp401_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> - const char *names[] = { "TMP401", "TMP411", "TMP431", "TMP432" };
> + static const char * const names[] = {
> + "TMP401", "TMP411", "TMP431", "TMP432", "TMP435"
> + };
> struct device *dev = &client->dev;
> struct device *hwmon_dev;
> struct tmp401_data *data;
> --
> 2.1.3
>
next prev parent reply other threads:[~2014-12-04 16:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 15:22 [PATCH v2 0/3] hwmon: tmp401: support for TMP435 and fix for a probe issue Bartosz Golaszewski
2014-12-04 15:22 ` [PATCH v2 1/3] hwmon: tmp401: add support for TI TMP435 Bartosz Golaszewski
2014-12-04 16:23 ` Guenter Roeck [this message]
2014-12-04 15:22 ` [PATCH v2 2/3] hwmon: tmp401: add TMP435 to the list of supported chips in docs and Kconfig Bartosz Golaszewski
2014-12-04 15:22 ` [PATCH v2 3/3] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors Bartosz Golaszewski
2014-12-04 16:25 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141204162318.GC7385@roeck-us.net \
--to=linux@roeck-us.net \
--cc=bcousson@baylibre.com \
--cc=bgolaszewski@baylibre.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=ptitiano@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome