mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: LKML <linux-kernel@vger.kernel.org>,
	Benoit Cousson <bcousson@baylibre.com>,
	Patrick Titiano <ptitiano@baylibre.com>,
	LM Sensors <lm-sensors@lm-sensors.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH v2 3/3] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors
Date: Thu,  4 Dec 2014 16:22:54 +0100	[thread overview]
Message-ID: <1417706574-1023-4-git-send-email-bgolaszewski@baylibre.com> (raw)
In-Reply-To: <1417706574-1023-1-git-send-email-bgolaszewski@baylibre.com>

The return value of i2c_smbus_read_byte_data() is checked in
tmp401_init_client(), but only a warning is printed and the device is
registered anyway. This leads to devices being registered even if they
cannot be physically detected.

Bail-out from probe in case of write errors and notify the user.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/hwmon/tmp401.c | 29 ++++++++++++++++++-----------
 1 file changed, 18 insertions(+), 11 deletions(-)

diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index a5f0973..ce7e579 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -618,10 +618,10 @@ static const struct attribute_group tmp432_group = {
  * Begin non sysfs callback code (aka Real code)
  */
 
-static void tmp401_init_client(struct tmp401_data *data,
-			       struct i2c_client *client)
+static int tmp401_init_client(struct tmp401_data *data,
+			      struct i2c_client *client)
 {
-	int config, config_orig;
+	int config, config_orig, status;
 
 	/* Set the conversion rate to 2 Hz */
 	i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
@@ -629,16 +629,21 @@ static void tmp401_init_client(struct tmp401_data *data,
 
 	/* Start conversions (disable shutdown if necessary) */
 	config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
-	if (config < 0) {
-		dev_warn(&client->dev, "Initialization failed!\n");
-		return;
-	}
+	if (config < 0)
+		return config;
 
 	config_orig = config;
 	config &= ~TMP401_CONFIG_SHUTDOWN;
 
-	if (config != config_orig)
-		i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
+	if (config != config_orig) {
+		status = i2c_smbus_write_byte_data(client,
+						   TMP401_CONFIG_WRITE,
+						   config);
+		if (status < 0)
+			return status;
+	}
+
+	return 0;
 }
 
 static int tmp401_detect(struct i2c_client *client,
@@ -721,7 +726,7 @@ static int tmp401_probe(struct i2c_client *client,
 	struct device *dev = &client->dev;
 	struct device *hwmon_dev;
 	struct tmp401_data *data;
-	int groups = 0;
+	int groups = 0, status;
 
 	data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
 	if (!data)
@@ -732,7 +737,9 @@ static int tmp401_probe(struct i2c_client *client,
 	data->kind = id->driver_data;
 
 	/* Initialize the TMP401 chip */
-	tmp401_init_client(data, client);
+	status = tmp401_init_client(data, client);
+	if (status < 0)
+		return status;
 
 	/* Register sysfs hooks */
 	data->groups[groups++] = &tmp401_group;
-- 
2.1.3


  parent reply	other threads:[~2014-12-04 15:23 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-04 15:22 [PATCH v2 0/3] hwmon: tmp401: support for TMP435 and fix for a probe issue Bartosz Golaszewski
2014-12-04 15:22 ` [PATCH v2 1/3] hwmon: tmp401: add support for TI TMP435 Bartosz Golaszewski
2014-12-04 16:23   ` Guenter Roeck
2014-12-04 15:22 ` [PATCH v2 2/3] hwmon: tmp401: add TMP435 to the list of supported chips in docs and Kconfig Bartosz Golaszewski
2014-12-04 15:22 ` Bartosz Golaszewski [this message]
2014-12-04 16:25   ` [PATCH v2 3/3] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1417706574-1023-4-git-send-email-bgolaszewski@baylibre.com \
    --to=bgolaszewski@baylibre.com \
    --cc=bcousson@baylibre.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lm-sensors@lm-sensors.org \
    --cc=ptitiano@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome