From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Felipe Balbi <balbi@ti.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Baolu Lu <baolu.lu@linux.intel.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [̈́PATCHv5 00/12] usb: ulpi bus
Date: Wed, 13 May 2015 15:26:41 +0300 [thread overview]
Message-ID: <1431520013-78645-1-git-send-email-heikki.krogerus@linux.intel.com> (raw)
Changes since v4:
- ulpi bus can now be build as a module
- using usleep_range instead of msleep.
Changes since v3:
- struct ulpi_bus is now static
- added a delay to sync the PHY clock after soft reset
Changes since v2:
- remove module handling from the bus driver as suggested by Paul Bolle.
- reordered the gpio requests in BYT quirk as suggested by David Cohen.
Major changes since v1:
- calling dwc3_phy_setup earlier and registering the ULPI interface there.
- new property to dwc3 for selecting the interface in case of UTMI+ and ULPI as
suggested by Felipe
- dwc3 soft reset before registration of the ULPI interface to sync the clocks
as suggested by David
- Including support for the BYT boards that have the GPIOs controlling the reset
and cs signals.
Heikki Krogerus (12):
usb: add bus type for USB ULPI
usb: dwc3: USB2 PHY register access bits
usb: dwc3: ULPI or UTMI+ select
usb: dwc3: store driver data earlier
usb: dwc3: cache hwparams earlier
usb: dwc3: soft reset to it's own function
usb: dwc3: setup phys earlier
usb: dwc3: add hsphy_interface property
usb: dwc3: pci: add quirk for Baytrails
usb: dwc3: add ULPI interface support
phy: helpers for USB ULPI PHY registering
phy: add driver for TI TUSB1210 ULPI PHY
Documentation/devicetree/bindings/usb/dwc3.txt | 2 +
MAINTAINERS | 7 +
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-tusb1210.c | 153 +++++++++++++++
drivers/phy/ulpi_phy.h | 31 +++
drivers/usb/common/Makefile | 1 +
drivers/usb/common/ulpi.c | 255 +++++++++++++++++++++++++
drivers/usb/core/Kconfig | 20 ++
drivers/usb/dwc3/Kconfig | 7 +
drivers/usb/dwc3/Makefile | 4 +
drivers/usb/dwc3/core.c | 108 ++++++++---
drivers/usb/dwc3/core.h | 26 +++
drivers/usb/dwc3/dwc3-pci.c | 36 ++++
drivers/usb/dwc3/platform_data.h | 2 +
drivers/usb/dwc3/ulpi.c | 91 +++++++++
include/linux/mod_devicetable.h | 6 +
include/linux/ulpi/driver.h | 60 ++++++
include/linux/ulpi/interface.h | 23 +++
include/linux/ulpi/regs.h | 130 +++++++++++++
include/linux/usb/ulpi.h | 134 +------------
scripts/mod/devicetable-offsets.c | 4 +
scripts/mod/file2alias.c | 13 ++
23 files changed, 964 insertions(+), 157 deletions(-)
create mode 100644 drivers/phy/phy-tusb1210.c
create mode 100644 drivers/phy/ulpi_phy.h
create mode 100644 drivers/usb/common/ulpi.c
create mode 100644 drivers/usb/dwc3/ulpi.c
create mode 100644 include/linux/ulpi/driver.h
create mode 100644 include/linux/ulpi/interface.h
create mode 100644 include/linux/ulpi/regs.h
--
2.1.4
next reply other threads:[~2015-05-13 12:26 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-13 12:26 Heikki Krogerus [this message]
2015-05-13 12:26 ` [̈́PATCHv5 01/12] usb: add bus type for USB ULPI Heikki Krogerus
2015-05-13 12:26 ` [̈́PATCHv5 02/12] usb: dwc3: USB2 PHY register access bits Heikki Krogerus
2015-05-13 12:26 ` [̈́PATCHv5 03/12] usb: dwc3: ULPI or UTMI+ select Heikki Krogerus
2015-05-13 12:26 ` [̈́PATCHv5 04/12] usb: dwc3: store driver data earlier Heikki Krogerus
2015-05-13 12:26 ` [̈́PATCHv5 05/12] usb: dwc3: cache hwparams earlier Heikki Krogerus
2015-05-13 12:26 ` [̈́PATCHv5 06/12] usb: dwc3: soft reset to it's own function Heikki Krogerus
2015-05-13 12:26 ` [̈́PATCHv5 07/12] usb: dwc3: setup phys earlier Heikki Krogerus
2015-05-13 12:26 ` [̈́PATCHv5 08/12] usb: dwc3: add hsphy_interface property Heikki Krogerus
2015-05-13 12:26 ` [̈́PATCHv5 09/12] usb: dwc3: pci: add quirk for Baytrails Heikki Krogerus
2015-05-13 12:26 ` [̈́PATCHv5 10/12] usb: dwc3: add ULPI interface support Heikki Krogerus
2015-05-13 12:26 ` [̈́PATCHv5 11/12] phy: helpers for USB ULPI PHY registering Heikki Krogerus
2015-05-13 12:26 ` [̈́PATCHv5 12/12] phy: add driver for TI TUSB1210 ULPI PHY Heikki Krogerus
2015-05-13 14:22 ` [̈́PATCHv5 00/12] usb: ulpi bus Al Viro
2015-05-15 7:09 ` Heikki Krogerus
2015-05-15 7:39 ` Tal Shorer
2015-05-15 10:31 ` Bjørn Mork
2015-05-15 12:03 ` Jeff Epler
2015-05-15 12:40 ` Al Viro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431520013-78645-1-git-send-email-heikki.krogerus@linux.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=balbi@ti.com \
--cc=baolu.lu@linux.intel.com \
--cc=david.a.cohen@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®