From: "Pali Rohár" <pali.rohar@gmail.com>
To: Darren Hart <dvhart@infradead.org>,
Matthew Garrett <mjg59@srcf.ucam.org>
Cc: platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org, "Pali Rohár" <pali.rohar@gmail.com>
Subject: [PATCH 2/4] dell-laptop: Check return value of all SMBIOS calls
Date: Sun, 21 Jun 2015 10:39:27 +0200 [thread overview]
Message-ID: <1434875967-13370-3-git-send-email-pali.rohar@gmail.com> (raw)
In-Reply-To: <1434875967-13370-1-git-send-email-pali.rohar@gmail.com>
Make sure that return value of all SMBIOS calls are properly checked and
do not continue of processing (received) information if call failed.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
---
drivers/platform/x86/dell-laptop.c | 61 +++++++++++++++++++++++++++++++-----
1 file changed, 54 insertions(+), 7 deletions(-)
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index ab89103..aaef335 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -548,21 +548,27 @@ static int dell_rfkill_set(void *data, bool blocked)
int disable = blocked ? 1 : 0;
unsigned long radio = (unsigned long)data;
int hwswitch_bit = (unsigned long)data - 1;
+ int status;
+ int ret;
get_buffer();
dell_send_request(buffer, 17, 11);
+ ret = buffer->output[0];
+ status = buffer->output[1];
/* If the hardware switch controls this radio, and the hardware
switch is disabled, always disable the radio */
- if ((hwswitch_state & BIT(hwswitch_bit)) &&
- !(buffer->output[1] & BIT(16)))
+ if (ret == 0 &&
+ (hwswitch_state & BIT(hwswitch_bit)) &&
+ !(status & BIT(16)))
disable = 1;
buffer->input[0] = (1 | (radio<<8) | (disable << 16));
dell_send_request(buffer, 17, 11);
+ ret = buffer->output[0];
release_buffer();
- return 0;
+ return dell_smi_error(ret);
}
/* Must be called with the buffer held */
@@ -590,14 +596,18 @@ static void dell_rfkill_update_hw_state(struct rfkill *rfkill, int radio,
static void dell_rfkill_query(struct rfkill *rfkill, void *data)
{
int status;
+ int ret;
get_buffer();
dell_send_request(buffer, 17, 11);
+ ret = buffer->output[0];
status = buffer->output[1];
+ release_buffer();
- dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status);
+ if (ret != 0)
+ return;
- release_buffer();
+ dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status);
}
static const struct rfkill_ops dell_rfkill_ops = {
@@ -610,12 +620,15 @@ static struct dentry *dell_laptop_dir;
static int dell_debugfs_show(struct seq_file *s, void *data)
{
int status;
+ int ret;
get_buffer();
dell_send_request(buffer, 17, 11);
+ ret = buffer->output[0];
status = buffer->output[1];
release_buffer();
+ seq_printf(s, "return:\t%d\n", ret);
seq_printf(s, "status:\t0x%X\n", status);
seq_printf(s, "Bit 0 : Hardware switch supported: %lu\n",
status & BIT(0));
@@ -677,11 +690,16 @@ static const struct file_operations dell_debugfs_fops = {
static void dell_update_rfkill(struct work_struct *ignored)
{
int status;
+ int ret;
get_buffer();
dell_send_request(buffer, 17, 11);
+ ret = buffer->output[0];
status = buffer->output[1];
+ if (ret != 0)
+ goto out;
+
if (wifi_rfkill) {
dell_rfkill_update_hw_state(wifi_rfkill, 1, status);
dell_rfkill_update_sw_state(wifi_rfkill, 1, status);
@@ -695,6 +713,7 @@ static void dell_update_rfkill(struct work_struct *ignored)
dell_rfkill_update_sw_state(wwan_rfkill, 3, status);
}
+ out:
release_buffer();
}
static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill);
@@ -755,13 +774,35 @@ static int __init dell_setup_rfkill(void)
return 0;
get_buffer();
+
dell_send_request(buffer, 17, 11);
+ ret = buffer->output[0];
status = buffer->output[1];
+ if (ret != 0) {
+ /* dell wireless info smbios call is not working */
+ /* so there is no support for rfkill */
+ release_buffer();
+ return 0;
+ }
+
buffer->input[0] = 0x2;
dell_send_request(buffer, 17, 11);
+ ret = buffer->output[0];
hwswitch_state = buffer->output[1];
+
release_buffer();
+ if (ret != 0) {
+ /* dell wireless switch smbios call is not working */
+ if (force_rfkill) {
+ /* clear all hw-controlled bits */
+ hwswitch_state &= ~7;
+ } else {
+ /* rfkill is only tested on laptops with a hwswitch */
+ return 0;
+ }
+ }
+
if (!(status & BIT(0))) {
if (force_rfkill) {
/* No hwsitch, clear all hw-controlled bits */
@@ -931,6 +972,8 @@ static int dell_send_intensity(struct backlight_device *bd)
else
dell_send_request(buffer, 1, 1);
+ ret = dell_smi_error(buffer->output[0]);
+
out:
release_buffer();
return ret;
@@ -953,7 +996,10 @@ static int dell_get_intensity(struct backlight_device *bd)
else
dell_send_request(buffer, 0, 1);
- ret = buffer->output[1];
+ if (buffer->output[0])
+ ret = dell_smi_error(buffer->output[0]);
+ else
+ ret = buffer->output[1];
out:
release_buffer();
@@ -2087,7 +2133,8 @@ static int __init dell_init(void)
buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN);
if (buffer->input[0] != -1) {
dell_send_request(buffer, 0, 2);
- max_intensity = buffer->output[3];
+ if (buffer->output[0] == 0)
+ max_intensity = buffer->output[3];
}
release_buffer();
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2015-06-21 8:40 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-21 8:39 [PATCH 0/4] Fixes for dell-laptop.c driver Pali Rohár
2015-06-21 8:39 ` [PATCH 1/4] dell-laptop: Update information about wireless control Pali Rohár
2015-06-22 19:06 ` Darren Hart
2015-06-21 8:39 ` Pali Rohár [this message]
2015-06-22 18:26 ` [PATCH 2/4] dell-laptop: Check return value of all SMBIOS calls Darren Hart
2015-06-27 7:34 ` [PATCH v2] dell-laptop: Check return value of all SMBIOS calls and do not cache hwswitch state Pali Rohár
2015-06-29 23:02 ` Darren Hart
2015-07-01 18:04 ` Pali Rohár
2015-07-01 18:08 ` [PATCH 1/3] dell-laptop: Clear buffer before each SMBIOS call Pali Rohár
2015-07-01 18:08 ` [PATCH 2/3] dell-laptop: Check return value of " Pali Rohár
2015-07-01 18:08 ` [PATCH 3/3] dell-laptop: Do not cache hwswitch state Pali Rohár
2015-07-02 0:42 ` Darren Hart
2015-07-06 10:09 ` Pali Rohár
2015-07-02 0:45 ` [PATCH 1/3] dell-laptop: Clear buffer before each SMBIOS call Darren Hart
2015-07-03 8:10 ` Pali Rohár
2015-07-06 10:08 ` [PATCH v2 " Pali Rohár
2015-07-06 10:08 ` [PATCH v2 2/3] dell-laptop: Check return value of " Pali Rohár
2015-07-06 10:08 ` [PATCH v2 3/3] dell-laptop: Do not cache hwswitch state Pali Rohár
2015-07-06 22:39 ` [PATCH v2 1/3] dell-laptop: Clear buffer before each SMBIOS call Darren Hart
2015-07-07 14:04 ` Pali Rohár
2015-07-07 15:52 ` Darren Hart
2015-06-21 8:41 ` [PATCH 3/4] dell-laptop: Fix allocating & freeing SMI buffer page Pali Rohár
2015-06-22 8:46 ` Michal Hocko
2015-06-22 19:04 ` Darren Hart
2015-06-23 8:11 ` [PATCH] " Pali Rohár
2015-06-25 3:23 ` Darren Hart
2015-06-21 8:41 ` [PATCH 4/4] dell-laptop: Show info about WiGig and UWB in debugfs Pali Rohár
2015-06-22 19:05 ` Darren Hart
2015-06-22 18:02 ` [PATCH 0/4] Fixes for dell-laptop.c driver Darren Hart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434875967-13370-3-git-send-email-pali.rohar@gmail.com \
--to=pali.rohar@gmail.com \
--cc=dvhart@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg59@srcf.ucam.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome