mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali.rohar@gmail.com>
To: Darren Hart <dvhart@infradead.org>,
	Matthew Garrett <mjg59@srcf.ucam.org>
Cc: platform-driver-x86@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Gabriele Mazzotta" <gabriele.mzt@gmail.com>,
	"Pali Rohár" <pali.rohar@gmail.com>
Subject: [PATCH v2 3/3] dell-laptop: Do not cache hwswitch state
Date: Mon,  6 Jul 2015 12:08:57 +0200	[thread overview]
Message-ID: <1436177337-13654-3-git-send-email-pali.rohar@gmail.com> (raw)
In-Reply-To: <1436177337-13654-1-git-send-email-pali.rohar@gmail.com>

It can be changed at runtime so make sure that dell-laptop knows always
current state. It can be modified by userspace utility smbios-wireless-ctl.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
---
 drivers/platform/x86/dell-laptop.c |   85 ++++++++++++++++++++++++++----------
 1 file changed, 61 insertions(+), 24 deletions(-)

diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index d9710c1..89d6004 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -308,8 +308,6 @@ static const struct dmi_system_id dell_quirks[] __initconst = {
 static struct calling_interface_buffer *buffer;
 static DEFINE_MUTEX(buffer_mutex);
 
-static int hwswitch_state;
-
 static void clear_buffer(void)
 {
 	memset(buffer, 0, sizeof(struct calling_interface_buffer));
@@ -552,20 +550,30 @@ static int dell_rfkill_set(void *data, bool blocked)
 	int disable = blocked ? 1 : 0;
 	unsigned long radio = (unsigned long)data;
 	int hwswitch_bit = (unsigned long)data - 1;
+	int hwswitch;
+	int status;
 	int ret;
 
 	get_buffer();
 
 	dell_send_request(buffer, 17, 11);
 	ret = buffer->output[0];
+	status = buffer->output[1];
 
 	if (ret != 0)
 		goto out;
 
+	clear_buffer();
+
+	buffer->input[0] = 0x2;
+	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
+	hwswitch = buffer->output[1];
+
 	/* If the hardware switch controls this radio, and the hardware
 	   switch is disabled, always disable the radio */
-	if ((hwswitch_state & BIT(hwswitch_bit)) &&
-	    !(buffer->output[1] & BIT(16)))
+	if (ret == 0 && (hwswitch & BIT(hwswitch_bit)) &&
+	    (status & BIT(0)) && !(status & BIT(16)))
 		disable = 1;
 
 	clear_buffer();
@@ -596,27 +604,43 @@ static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio,
 }
 
 static void dell_rfkill_update_hw_state(struct rfkill *rfkill, int radio,
-					int status)
+					int status, int hwswitch)
 {
-	if (hwswitch_state & (BIT(radio - 1)))
+	if (hwswitch & (BIT(radio - 1)))
 		rfkill_set_hw_state(rfkill, !(status & BIT(16)));
 }
 
 static void dell_rfkill_query(struct rfkill *rfkill, void *data)
 {
+	int radio = ((unsigned long)data & 0xF);
+	int hwswitch;
 	int status;
 	int ret;
 
 	get_buffer();
+
 	dell_send_request(buffer, 17, 11);
 	ret = buffer->output[0];
 	status = buffer->output[1];
+
+	if (ret != 0 || !(status & BIT(0))) {
+		release_buffer();
+		return;
+	}
+
+	clear_buffer();
+
+	buffer->input[0] = 0x2;
+	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
+	hwswitch = buffer->output[1];
+
 	release_buffer();
 
 	if (ret != 0)
 		return;
 
-	dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status);
+	dell_rfkill_update_hw_state(rfkill, radio, status, hwswitch);
 }
 
 static const struct rfkill_ops dell_rfkill_ops = {
@@ -628,13 +652,24 @@ static struct dentry *dell_laptop_dir;
 
 static int dell_debugfs_show(struct seq_file *s, void *data)
 {
+	int hwswitch_state;
+	int hwswitch_ret;
 	int status;
 	int ret;
 
 	get_buffer();
+
 	dell_send_request(buffer, 17, 11);
 	ret = buffer->output[0];
 	status = buffer->output[1];
+
+	clear_buffer();
+
+	buffer->input[0] = 0x2;
+	dell_send_request(buffer, 17, 11);
+	hwswitch_ret = buffer->output[0];
+	hwswitch_state = buffer->output[1];
+
 	release_buffer();
 
 	seq_printf(s, "return:\t%d\n", ret);
@@ -679,7 +714,8 @@ static int dell_debugfs_show(struct seq_file *s, void *data)
 	seq_printf(s, "Bit 21: WiGig is blocked:            %lu\n",
 		  (status & BIT(21)) >> 21);
 
-	seq_printf(s, "\nhwswitch_state:\t0x%X\n", hwswitch_state);
+	seq_printf(s, "\nhwswitch_return:\t%d\n", hwswitch_ret);
+	seq_printf(s, "hwswitch_state:\t0x%X\n", hwswitch_state);
 	seq_printf(s, "Bit 0 : Wifi controlled by switch:      %lu\n",
 		   hwswitch_state & BIT(0));
 	seq_printf(s, "Bit 1 : Bluetooth controlled by switch: %lu\n",
@@ -715,6 +751,7 @@ static const struct file_operations dell_debugfs_fops = {
 
 static void dell_update_rfkill(struct work_struct *ignored)
 {
+	int hwswitch = 0;
 	int status;
 	int ret;
 
@@ -727,16 +764,26 @@ static void dell_update_rfkill(struct work_struct *ignored)
 	if (ret != 0)
 		goto out;
 
+	clear_buffer();
+
+	buffer->input[0] = 0x2;
+	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
+
+	if (ret == 0 && (status & BIT(0)))
+		hwswitch = buffer->output[1];
+
 	if (wifi_rfkill) {
-		dell_rfkill_update_hw_state(wifi_rfkill, 1, status);
+		dell_rfkill_update_hw_state(wifi_rfkill, 1, status, hwswitch);
 		dell_rfkill_update_sw_state(wifi_rfkill, 1, status);
 	}
 	if (bluetooth_rfkill) {
-		dell_rfkill_update_hw_state(bluetooth_rfkill, 2, status);
+		dell_rfkill_update_hw_state(bluetooth_rfkill, 2, status,
+					    hwswitch);
 		dell_rfkill_update_sw_state(bluetooth_rfkill, 2, status);
 	}
 	if (wwan_rfkill) {
-		dell_rfkill_update_hw_state(wwan_rfkill, 3, status);
+		dell_rfkill_update_hw_state(wwan_rfkill, 3, status, hwswitch);
 		dell_rfkill_update_sw_state(wwan_rfkill, 3, status);
 	}
 
@@ -804,25 +851,15 @@ static int __init dell_setup_rfkill(void)
 	dell_send_request(buffer, 17, 11);
 	ret = buffer->output[0];
 	status = buffer->output[1];
-	clear_buffer();
-	buffer->input[0] = 0x2;
-	dell_send_request(buffer, 17, 11);
-	hwswitch_state = buffer->output[1];
 	release_buffer();
 
 	/* dell wireless info smbios call is not supported */
 	if (ret != 0)
 		return 0;
 
-	if (!(status & BIT(0))) {
-		if (force_rfkill) {
-			/* No hwsitch, clear all hw-controlled bits */
-			hwswitch_state &= ~7;
-		} else {
-			/* rfkill is only tested on laptops with a hwswitch */
-			return 0;
-		}
-	}
+	/* rfkill is only tested on laptops with a hwswitch */
+	if (!(status & BIT(0)) && !force_rfkill)
+		return 0;
 
 	if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) {
 		wifi_rfkill = rfkill_alloc("dell-wifi", &platform_device->dev,
-- 
1.7.9.5


  parent reply	other threads:[~2015-07-06 10:09 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-21  8:39 [PATCH 0/4] Fixes for dell-laptop.c driver Pali Rohár
2015-06-21  8:39 ` [PATCH 1/4] dell-laptop: Update information about wireless control Pali Rohár
2015-06-22 19:06   ` Darren Hart
2015-06-21  8:39 ` [PATCH 2/4] dell-laptop: Check return value of all SMBIOS calls Pali Rohár
2015-06-22 18:26   ` Darren Hart
2015-06-27  7:34   ` [PATCH v2] dell-laptop: Check return value of all SMBIOS calls and do not cache hwswitch state Pali Rohár
2015-06-29 23:02     ` Darren Hart
2015-07-01 18:04       ` Pali Rohár
2015-07-01 18:08         ` [PATCH 1/3] dell-laptop: Clear buffer before each SMBIOS call Pali Rohár
2015-07-01 18:08           ` [PATCH 2/3] dell-laptop: Check return value of " Pali Rohár
2015-07-01 18:08           ` [PATCH 3/3] dell-laptop: Do not cache hwswitch state Pali Rohár
2015-07-02  0:42             ` Darren Hart
2015-07-06 10:09               ` Pali Rohár
2015-07-02  0:45           ` [PATCH 1/3] dell-laptop: Clear buffer before each SMBIOS call Darren Hart
2015-07-03  8:10             ` Pali Rohár
2015-07-06 10:08           ` [PATCH v2 " Pali Rohár
2015-07-06 10:08             ` [PATCH v2 2/3] dell-laptop: Check return value of " Pali Rohár
2015-07-06 10:08             ` Pali Rohár [this message]
2015-07-06 22:39             ` [PATCH v2 1/3] dell-laptop: Clear buffer before " Darren Hart
2015-07-07 14:04               ` Pali Rohár
2015-07-07 15:52                 ` Darren Hart
2015-06-21  8:41 ` [PATCH 3/4] dell-laptop: Fix allocating & freeing SMI buffer page Pali Rohár
2015-06-22  8:46   ` Michal Hocko
2015-06-22 19:04   ` Darren Hart
2015-06-23  8:11   ` [PATCH] " Pali Rohár
2015-06-25  3:23     ` Darren Hart
2015-06-21  8:41 ` [PATCH 4/4] dell-laptop: Show info about WiGig and UWB in debugfs Pali Rohár
2015-06-22 19:05   ` Darren Hart
2015-06-22 18:02 ` [PATCH 0/4] Fixes for dell-laptop.c driver Darren Hart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1436177337-13654-3-git-send-email-pali.rohar@gmail.com \
    --to=pali.rohar@gmail.com \
    --cc=dvhart@infradead.org \
    --cc=gabriele.mzt@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mjg59@srcf.ucam.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome