mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali.rohar@gmail.com>
To: Darren Hart <dvhart@infradead.org>,
	Matthew Garrett <mjg59@srcf.ucam.org>
Cc: platform-driver-x86@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Gabriele Mazzotta" <gabriele.mzt@gmail.com>,
	"Pali Rohár" <pali.rohar@gmail.com>
Subject: [PATCH 2/3] dell-laptop: Check return value of each SMBIOS call
Date: Wed,  1 Jul 2015 20:08:20 +0200	[thread overview]
Message-ID: <1435774101-12329-2-git-send-email-pali.rohar@gmail.com> (raw)
In-Reply-To: <1435774101-12329-1-git-send-email-pali.rohar@gmail.com>

Make sure that return value of each SMBIOS call is properly checked and
do not continue of processing (received) information if call failed.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
---
 drivers/platform/x86/dell-laptop.c |   83 +++++++++++++++++++++++++-----------
 1 file changed, 58 insertions(+), 25 deletions(-)

diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 6728487..b840ab1 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -552,9 +552,15 @@ static int dell_rfkill_set(void *data, bool blocked)
 	int disable = blocked ? 1 : 0;
 	unsigned long radio = (unsigned long)data;
 	int hwswitch_bit = (unsigned long)data - 1;
+	int ret;
 
 	get_buffer();
+
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
+
+	if (ret != 0)
+		goto out;
 
 	/* If the hardware switch controls this radio, and the hardware
 	   switch is disabled, always disable the radio */
@@ -566,9 +572,11 @@ static int dell_rfkill_set(void *data, bool blocked)
 
 	buffer->input[0] = (1 | (radio<<8) | (disable << 16));
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
 
+ out:
 	release_buffer();
-	return 0;
+	return dell_smi_error(ret);
 }
 
 /* Must be called with the buffer held */
@@ -597,14 +605,18 @@ static void dell_rfkill_update_hw_state(struct rfkill *rfkill, int radio,
 static void dell_rfkill_query(struct rfkill *rfkill, void *data)
 {
 	int status;
+	int ret;
 
 	get_buffer();
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
 	status = buffer->output[1];
+	release_buffer();
 
-	dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status);
+	if (ret != 0)
+		return;
 
-	release_buffer();
+	dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status);
 }
 
 static const struct rfkill_ops dell_rfkill_ops = {
@@ -617,12 +629,15 @@ static struct dentry *dell_laptop_dir;
 static int dell_debugfs_show(struct seq_file *s, void *data)
 {
 	int status;
+	int ret;
 
 	get_buffer();
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
 	status = buffer->output[1];
 	release_buffer();
 
+	seq_printf(s, "return:\t%d\n", ret);
 	seq_printf(s, "status:\t0x%X\n", status);
 	seq_printf(s, "Bit 0 : Hardware switch supported:   %lu\n",
 		   status & BIT(0));
@@ -701,11 +716,17 @@ static const struct file_operations dell_debugfs_fops = {
 static void dell_update_rfkill(struct work_struct *ignored)
 {
 	int status;
+	int ret;
 
 	get_buffer();
+
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
 	status = buffer->output[1];
 
+	if (ret != 0)
+		goto out;
+
 	if (wifi_rfkill) {
 		dell_rfkill_update_hw_state(wifi_rfkill, 1, status);
 		dell_rfkill_update_sw_state(wifi_rfkill, 1, status);
@@ -719,6 +740,7 @@ static void dell_update_rfkill(struct work_struct *ignored)
 		dell_rfkill_update_sw_state(wwan_rfkill, 3, status);
 	}
 
+ out:
 	release_buffer();
 }
 static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill);
@@ -780,6 +802,7 @@ static int __init dell_setup_rfkill(void)
 
 	get_buffer();
 	dell_send_request(buffer, 17, 11);
+	ret = buffer->output[0];
 	status = buffer->output[1];
 	buffer->input[0] = 0x2;
 	clear_buffer();
@@ -787,6 +810,10 @@ static int __init dell_setup_rfkill(void)
 	hwswitch_state = buffer->output[1];
 	release_buffer();
 
+	/* dell wireless info smbios call is not supported */
+	if (ret != 0)
+		return 0;
+
 	if (!(status & BIT(0))) {
 		if (force_rfkill) {
 			/* No hwsitch, clear all hw-controlled bits */
@@ -940,47 +967,50 @@ static void dell_cleanup_rfkill(void)
 
 static int dell_send_intensity(struct backlight_device *bd)
 {
-	int ret = 0;
+	int token;
+	int ret;
+
+	token = find_token_location(BRIGHTNESS_TOKEN);
+	if (token == -1)
+		return -ENODEV;
 
 	get_buffer();
-	buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN);
+	buffer->input[0] = token;
 	buffer->input[1] = bd->props.brightness;
 
-	if (buffer->input[0] == -1) {
-		ret = -ENODEV;
-		goto out;
-	}
-
 	if (power_supply_is_system_supplied() > 0)
 		dell_send_request(buffer, 1, 2);
 	else
 		dell_send_request(buffer, 1, 1);
 
- out:
+	ret = dell_smi_error(buffer->output[0]);
+
 	release_buffer();
 	return ret;
 }
 
 static int dell_get_intensity(struct backlight_device *bd)
 {
-	int ret = 0;
+	int token;
+	int ret;
 
-	get_buffer();
-	buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN);
+	token = find_token_location(BRIGHTNESS_TOKEN);
+	if (token == -1)
+		return -ENODEV;
 
-	if (buffer->input[0] == -1) {
-		ret = -ENODEV;
-		goto out;
-	}
+	get_buffer();
+	buffer->input[0] = token;
 
 	if (power_supply_is_system_supplied() > 0)
 		dell_send_request(buffer, 0, 2);
 	else
 		dell_send_request(buffer, 0, 1);
 
-	ret = buffer->output[1];
+	if (buffer->output[0])
+		ret = dell_smi_error(buffer->output[0]);
+	else
+		ret = buffer->output[1];
 
- out:
 	release_buffer();
 	return ret;
 }
@@ -2044,6 +2074,7 @@ static void kbd_led_exit(void)
 static int __init dell_init(void)
 {
 	int max_intensity = 0;
+	int token;
 	int ret;
 
 	if (!dmi_check_system(dell_device_table))
@@ -2107,13 +2138,15 @@ static int __init dell_init(void)
 		return 0;
 #endif
 
-	get_buffer();
-	buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN);
-	if (buffer->input[0] != -1) {
+	token = find_token_location(BRIGHTNESS_TOKEN);
+	if (token != -1) {
+		get_buffer();
+		buffer->input[0] = token;
 		dell_send_request(buffer, 0, 2);
-		max_intensity = buffer->output[3];
+		if (buffer->output[0] == 0)
+			max_intensity = buffer->output[3];
+		release_buffer();
 	}
-	release_buffer();
 
 	if (max_intensity) {
 		struct backlight_properties props;
-- 
1.7.9.5


  reply	other threads:[~2015-07-01 18:08 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-21  8:39 [PATCH 0/4] Fixes for dell-laptop.c driver Pali Rohár
2015-06-21  8:39 ` [PATCH 1/4] dell-laptop: Update information about wireless control Pali Rohár
2015-06-22 19:06   ` Darren Hart
2015-06-21  8:39 ` [PATCH 2/4] dell-laptop: Check return value of all SMBIOS calls Pali Rohár
2015-06-22 18:26   ` Darren Hart
2015-06-27  7:34   ` [PATCH v2] dell-laptop: Check return value of all SMBIOS calls and do not cache hwswitch state Pali Rohár
2015-06-29 23:02     ` Darren Hart
2015-07-01 18:04       ` Pali Rohár
2015-07-01 18:08         ` [PATCH 1/3] dell-laptop: Clear buffer before each SMBIOS call Pali Rohár
2015-07-01 18:08           ` Pali Rohár [this message]
2015-07-01 18:08           ` [PATCH 3/3] dell-laptop: Do not cache hwswitch state Pali Rohár
2015-07-02  0:42             ` Darren Hart
2015-07-06 10:09               ` Pali Rohár
2015-07-02  0:45           ` [PATCH 1/3] dell-laptop: Clear buffer before each SMBIOS call Darren Hart
2015-07-03  8:10             ` Pali Rohár
2015-07-06 10:08           ` [PATCH v2 " Pali Rohár
2015-07-06 10:08             ` [PATCH v2 2/3] dell-laptop: Check return value of " Pali Rohár
2015-07-06 10:08             ` [PATCH v2 3/3] dell-laptop: Do not cache hwswitch state Pali Rohár
2015-07-06 22:39             ` [PATCH v2 1/3] dell-laptop: Clear buffer before each SMBIOS call Darren Hart
2015-07-07 14:04               ` Pali Rohár
2015-07-07 15:52                 ` Darren Hart
2015-06-21  8:41 ` [PATCH 3/4] dell-laptop: Fix allocating & freeing SMI buffer page Pali Rohár
2015-06-22  8:46   ` Michal Hocko
2015-06-22 19:04   ` Darren Hart
2015-06-23  8:11   ` [PATCH] " Pali Rohár
2015-06-25  3:23     ` Darren Hart
2015-06-21  8:41 ` [PATCH 4/4] dell-laptop: Show info about WiGig and UWB in debugfs Pali Rohár
2015-06-22 19:05   ` Darren Hart
2015-06-22 18:02 ` [PATCH 0/4] Fixes for dell-laptop.c driver Darren Hart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435774101-12329-2-git-send-email-pali.rohar@gmail.com \
    --to=pali.rohar@gmail.com \
    --cc=dvhart@infradead.org \
    --cc=gabriele.mzt@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mjg59@srcf.ucam.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome