Re: [PATCH v2 2/6] clk: tegra: add TEGRA30_CLK_NOR to init table

[Marcel Ziswiler <marcel.ziswiler@toradex.com>]

On Wed, 2016-08-24 at 15:37 +0200, Mirza Krak wrote:
> 
> From: Mirza Krak <mirza.krak-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> Add TEGRA30_CLK_NOR to init table and set default rate to 127 MHz
> which
> is max rate.
> 
> Signed-off-by: Mirza Krak <mirza.krak-Re5JQEeQqe8AvxtiuMwx3w@public.g
> mane.org>
> ---
> Changes in v2:
> - no changes
> 
>  drivers/clk/tegra/clk-tegra30.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-
> tegra30.c
> index 8e2db5e..67f1677 100644
> --- a/drivers/clk/tegra/clk-tegra30.c
> +++ b/drivers/clk/tegra/clk-tegra30.c
> @@ -1252,6 +1252,7 @@ static struct tegra_clk_init_table init_table[]
> __initdata = {
>  	{ TEGRA30_CLK_SDMMC1, TEGRA30_CLK_PLL_P, 48000000, 0 },
>  	{ TEGRA30_CLK_SDMMC2, TEGRA30_CLK_PLL_P, 48000000, 0 },
>  	{ TEGRA30_CLK_SDMMC3, TEGRA30_CLK_PLL_P, 48000000, 0 },
> +	{ TEGRA30_CLK_NOR, TEGRA30_CLK_PLL_P, 127000000, 0 },

The Tegra 3 Interface Design Guide states the same 133 MHz.

> 
>  	{ TEGRA30_CLK_PLL_M, TEGRA30_CLK_CLK_MAX, 0, 1 },
>  	{ TEGRA30_CLK_PCLK, TEGRA30_CLK_CLK_MAX, 0, 1 },
>  	{ TEGRA30_CLK_CSITE, TEGRA30_CLK_CLK_MAX, 0, 1 },
> --
> 2.1.4