mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tomasz Nowicki <tn@semihalf.com>
To: helgaas@kernel.org, will.deacon@arm.com, catalin.marinas@arm.com,
	rafael@kernel.org, Lorenzo.Pieralisi@arm.com
Cc: arnd@arndb.de, hanjun.guo@linaro.org, okaya@codeaurora.org,
	jchandra@broadcom.com, cov@codeaurora.org, dhdang@apm.com,
	ard.biesheuvel@linaro.org, robert.richter@caviumnetworks.com,
	mw@semihalf.com, Liviu.Dudau@arm.com, ddaney@caviumnetworks.com,
	wangyijing@huawei.com, msalter@redhat.com,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linaro-acpi@lists.linaro.org, jcm@redhat.com,
	andrea.gallo@linaro.org, jeremy.linton@arm.com,
	liudongdong3@huawei.com, gabriele.paoloni@huawei.com,
	jhugo@codeaurora.org, linux-acpi@vger.kernel.org,
	linux-kernel@vger.kernel.org, Tomasz Nowicki <tn@semihalf.com>
Subject: [PATCH V6 4/5] PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x silicon version
Date: Fri,  9 Sep 2016 21:24:06 +0200	[thread overview]
Message-ID: <1473449047-10499-5-git-send-email-tn@semihalf.com> (raw)
In-Reply-To: <1473449047-10499-1-git-send-email-tn@semihalf.com>

ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully
compliant with ECAM standard. It uses non-standard configuration space
accessors (see pci_thunder_pem_ops) and custom configuration space granulation
(see bus_shift = 24). In order to access configuration space and
probe PEM as ACPI based PCI host controller we need to add MCFG quirk
infrastructure. This involves:
1. Export PEM pci_thunder_pem_ops structure so it is visible to MCFG quirk
   code.
2. New quirk entries for each PEM segment. Each contains platform IDs,
   mentioned pci_thunder_pem_ops and CFG resources.

Quirk is considered for ThunderX silicon pass2.x only which is identified
via MCFG revision 1.

Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
---
 drivers/acpi/pci_mcfg.c            | 27 +++++++++++++++++++++++++++
 drivers/pci/host/pci-thunder-pem.c |  2 +-
 include/linux/pci-ecam.h           |  4 ++++
 3 files changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 2b8acc7..1f73d7b 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -51,6 +51,33 @@ struct mcfg_fixup {
 
 static struct mcfg_fixup mcfg_quirks[] = {
 /*	{ OEM_ID, OEM_TABLE_ID, REV, DOMAIN, BUS_RANGE, cfgres, ops }, */
+#ifdef CONFIG_PCI_HOST_THUNDER_PEM
+	/* SoC pass2.x */
+	{ "CAVIUM", "THUNDERX", 1, 4, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x88001f000000UL, 0x39 * SZ_16M) },
+	{ "CAVIUM", "THUNDERX", 1, 5, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x884057000000UL, 0x39 * SZ_16M) },
+	{ "CAVIUM", "THUNDERX", 1, 6, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x88808f000000UL, 0x39 * SZ_16M) },
+	{ "CAVIUM", "THUNDERX", 1, 7, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x89001f000000UL, 0x39 * SZ_16M) },
+	{ "CAVIUM", "THUNDERX", 1, 8, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x894057000000UL, 0x39 * SZ_16M) },
+	{ "CAVIUM", "THUNDERX", 1, 9, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x89808f000000UL, 0x39 * SZ_16M) },
+	{ "CAVIUM", "THUNDERX", 1, 14, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x98001f000000UL, 0x39 * SZ_16M) },
+	{ "CAVIUM", "THUNDERX", 1, 15, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x984057000000UL, 0x39 * SZ_16M) },
+	{ "CAVIUM", "THUNDERX", 1, 16, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x98808f000000UL, 0x39 * SZ_16M) },
+	{ "CAVIUM", "THUNDERX", 1, 17, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x99001f000000UL, 0x39 * SZ_16M) },
+	{ "CAVIUM", "THUNDERX", 1, 18, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x994057000000UL, 0x39 * SZ_16M) },
+	{ "CAVIUM", "THUNDERX", 1, 19, MCFG_BUS_ANY, &pci_thunder_pem_ops,
+	  DEFINE_RES_MEM(0x99808f000000UL, 0x39 * SZ_16M) },
+#endif
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index b048761..d7c10cc 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -367,7 +367,7 @@ static int thunder_pem_init(struct pci_config_window *cfg)
 	return 0;
 }
 
-static struct pci_ecam_ops pci_thunder_pem_ops = {
+struct pci_ecam_ops pci_thunder_pem_ops = {
 	.bus_shift	= 24,
 	.init		= thunder_pem_init,
 	.pci_ops	= {
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index 7adad20..65505ea 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -58,6 +58,10 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn,
 			       int where);
 /* default ECAM ops */
 extern struct pci_ecam_ops pci_generic_ecam_ops;
+/* ECAM ops for known quirks */
+#ifdef CONFIG_PCI_HOST_THUNDER_PEM
+extern struct pci_ecam_ops pci_thunder_pem_ops;
+#endif
 
 #ifdef CONFIG_PCI_HOST_GENERIC
 /* for DT-based PCI controllers that support ECAM */
-- 
1.9.1

  parent reply	other threads:[~2016-09-09 19:24 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-09 19:24 [PATCH V6 0/5] ECAM quirks handling for ARM64 platforms Tomasz Nowicki
2016-09-09 19:24 ` [PATCH V6 1/5] PCI/ACPI: Extend pci_mcfg_lookup() responsibilities Tomasz Nowicki
2016-09-09 19:24 ` [PATCH V6 2/5] PCI/ACPI: Check platform specific ECAM quirks Tomasz Nowicki
2016-09-12 22:24   ` Duc Dang
2016-09-12 22:47     ` Duc Dang
2016-09-13  5:58       ` Tomasz Nowicki
2016-09-13  6:37     ` Tomasz Nowicki
2016-09-13  2:36   ` Dongdong Liu
2016-09-13  6:32     ` Tomasz Nowicki
2016-09-13 11:38       ` Dongdong Liu
2016-09-14 12:40         ` Lorenzo Pieralisi
2016-09-15 10:58         ` Lorenzo Pieralisi
2016-09-16  9:02           ` Gabriele Paoloni
2016-09-16 12:27             ` Christopher Covington
2016-09-16 13:42               ` Gabriele Paoloni
2016-09-09 19:24 ` [PATCH V6 3/5] PCI: thunder-pem: Allow to probe PEM-specific register range for ACPI case Tomasz Nowicki
2016-09-19 18:09   ` Bjorn Helgaas
2016-09-20  7:23     ` Tomasz Nowicki
2016-09-20 13:33       ` Bjorn Helgaas
2016-09-20 13:40         ` Ard Biesheuvel
2016-09-20 14:05           ` Bjorn Helgaas
2016-09-20 15:09             ` Ard Biesheuvel
2016-09-20 19:17               ` Bjorn Helgaas
2016-09-21 14:05                 ` Lorenzo Pieralisi
2016-09-21 18:04                   ` Bjorn Helgaas
2016-09-21 18:58                     ` Duc Dang
2016-09-21 19:18                       ` Bjorn Helgaas
2016-09-23 10:53                         ` Tomasz Nowicki
2016-09-22  9:49                     ` Lorenzo Pieralisi
2016-09-22 11:10                       ` Gabriele Paoloni
2016-09-22 12:44                         ` Lorenzo Pieralisi
2016-09-22 18:31                           ` Bjorn Helgaas
2016-09-22 22:10                             ` Bjorn Helgaas
2016-09-23 10:11                               ` Lorenzo Pieralisi
2016-09-23 10:58                                 ` Gabriele Paoloni
2017-09-14 14:06                                   ` Ard Biesheuvel
2017-09-26  8:23                                     ` Gabriele Paoloni
2016-09-22 14:20                       ` Christopher Covington
2016-09-21 14:10                 ` Gabriele Paoloni
2016-09-21 18:59                   ` Bjorn Helgaas
2016-09-22 11:12                     ` Gabriele Paoloni
2016-09-09 19:24 ` Tomasz Nowicki [this message]
2016-09-19 15:45   ` [PATCH V6 4/5] PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x silicon version Bjorn Helgaas
2016-09-20  7:06     ` Tomasz Nowicki
2016-09-20 13:08       ` Bjorn Helgaas
2016-09-21  8:05         ` Tomasz Nowicki
2016-09-09 19:24 ` [PATCH V6 5/5] PCI: thunder: Enable ACPI PCI controller for ThunderX pass1.x " Tomasz Nowicki
2016-09-09 19:30 ` [PATCH V6 0/5] ECAM quirks handling for ARM64 platforms Tomasz Nowicki
2016-09-20 19:26 ` Bjorn Helgaas
2016-09-21  1:15   ` cov
2016-09-21 13:11     ` Bjorn Helgaas
2016-09-21 14:07       ` Sinan Kaya
2016-09-21 17:31         ` Bjorn Helgaas
2016-09-21 17:34           ` Sinan Kaya
2016-09-21 22:38           ` [PATCHv2] PCI: QDF2432 32 bit config space accessors Christopher Covington
2016-10-31 21:48             ` Bjorn Helgaas
2016-11-01 13:06               ` cov
2016-11-02 16:08                 ` Bjorn Helgaas
2016-11-02 16:36                   ` Sinan Kaya
2016-11-03 14:00                     ` Bjorn Helgaas
2016-11-03 16:58                       ` Sinan Kaya
2016-11-03 17:06                         ` Sinan Kaya
2016-11-03 20:43                         ` Bjorn Helgaas
2016-11-03 23:49                           ` Sinan Kaya
2016-12-02  4:58                       ` Jon Masters
2016-11-02 16:41                   ` Bjorn Helgaas
2016-11-09 19:25                   ` Christopher Covington
2016-11-09 20:06                     ` Bjorn Helgaas
2016-11-09 20:29                       ` Ard Biesheuvel
2016-11-09 22:49                         ` Bjorn Helgaas
2016-11-10 10:25                           ` Ard Biesheuvel
2016-11-10 13:57                             ` Lorenzo Pieralisi
2016-11-10 17:42                             ` Bjorn Helgaas
2016-12-02  5:12                               ` Jon Masters
2016-09-21 22:40       ` [PATCH V6 0/5] ECAM quirks handling for ARM64 platforms Christopher Covington
2016-09-22 23:08         ` Bjorn Helgaas
2016-09-23 18:41           ` Christopher Covington
2016-09-23 19:17             ` Bjorn Helgaas
2016-09-23 19:22               ` Christopher Covington
2016-11-24 11:05 ` [PATCH V6 1/1] ARM64/PCI: Manage controller-specific information on the host controller basis Tomasz Nowicki
2016-11-29 23:40   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1473449047-10499-5-git-send-email-tn@semihalf.com \
    --to=tn@semihalf.com \
    --cc=Liviu.Dudau@arm.com \
    --cc=Lorenzo.Pieralisi@arm.com \
    --cc=andrea.gallo@linaro.org \
    --cc=ard.biesheuvel@linaro.org \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=cov@codeaurora.org \
    --cc=ddaney@caviumnetworks.com \
    --cc=dhdang@apm.com \
    --cc=gabriele.paoloni@huawei.com \
    --cc=hanjun.guo@linaro.org \
    --cc=helgaas@kernel.org \
    --cc=jchandra@broadcom.com \
    --cc=jcm@redhat.com \
    --cc=jeremy.linton@arm.com \
    --cc=jhugo@codeaurora.org \
    --cc=linaro-acpi@lists.linaro.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liudongdong3@huawei.com \
    --cc=msalter@redhat.com \
    --cc=mw@semihalf.com \
    --cc=okaya@codeaurora.org \
    --cc=rafael@kernel.org \
    --cc=robert.richter@caviumnetworks.com \
    --cc=wangyijing@huawei.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome