From: Thierry Escande <thierry.escande@collabora.com>
To: Jonathan Cameron <jic23@kernel.org>,
Gwendal Grignou <gwendal@chromium.org>
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org
Subject: [PATCH 1/3] mfd: cros_ec: Add activity motion sense definitions
Date: Mon, 5 Dec 2016 10:13:16 +0100 [thread overview]
Message-ID: <1480929198-13671-2-git-send-email-thierry.escande@collabora.com> (raw)
In-Reply-To: <1480929198-13671-1-git-send-email-thierry.escande@collabora.com>
From: Gwendal Grignou <gwendal@chromium.org>
This adds motion sense definitions to the commands header related to the
activity sensors attached behind the ChromeOS Embedded Controller.
Supported activities are MOTION and DOUBLE_TAP.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
---
include/linux/mfd/cros_ec_commands.h | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 1683003..80e6060 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1417,6 +1417,18 @@ enum motionsense_command {
*/
MOTIONSENSE_CMD_SENSOR_OFFSET = 11,
+ /*
+ * List available activities for a MOTION sensor.
+ * Indicates if they are enabled or disabled.
+ */
+ MOTIONSENSE_CMD_LIST_ACTIVITIES = 12,
+
+ /*
+ * Activity management
+ * Enable/Disable activity recognition.
+ */
+ MOTIONSENSE_CMD_SET_ACTIVITY = 13,
+
/* Number of motionsense sub-commands. */
MOTIONSENSE_NUM_CMDS
};
@@ -1494,6 +1506,21 @@ struct ec_response_motion_sensor_data {
};
} __packed;
+/* List supported activity recognition */
+enum motionsensor_activity {
+ MOTIONSENSE_ACTIVITY_RESERVED = 0,
+ MOTIONSENSE_ACTIVITY_SIG_MOTION = 1,
+ MOTIONSENSE_ACTIVITY_DOUBLE_TAP = 2,
+};
+
+struct ec_motion_sense_activity {
+ uint8_t sensor_num;
+ uint8_t activity; /* one of enum motionsensor_activity */
+ uint8_t enable; /* 1: enable, 0: disable */
+ uint8_t reserved;
+ uint16_t parameters[3]; /* activity dependent parameters */
+};
+
struct ec_params_motion_sense {
uint8_t cmd;
union {
@@ -1561,6 +1588,8 @@ struct ec_params_motion_sense {
/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
int32_t data;
} sensor_odr, sensor_range;
+
+ struct ec_motion_sense_activity set_activity;
};
} __packed;
@@ -1611,6 +1640,12 @@ struct ec_response_motion_sense {
int16_t temp;
int16_t offset[3];
} sensor_offset, perform_calib;
+
+ struct {
+ uint16_t reserved;
+ uint32_t enabled;
+ uint32_t disabled;
+ } __packed list_activities;
};
} __packed;
--
2.7.4
next prev parent reply other threads:[~2016-12-05 9:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-05 9:13 [PATCH 0/3] Add ChromeOS EC Activity Sensors driver Thierry Escande
2016-12-05 9:13 ` Thierry Escande [this message]
2017-01-03 15:51 ` [PATCH 1/3] mfd: cros_ec: Add activity motion sense definitions Lee Jones
2016-12-05 9:13 ` [PATCH 2/3] iio: core: Add double tap as possible gesture Thierry Escande
2016-12-06 11:25 ` Peter Meerwald-Stadler
2016-12-19 21:11 ` Jonathan Cameron
2017-06-08 1:10 ` Gwendal Grignou
2017-06-11 14:46 ` Jonathan Cameron
2016-12-05 9:13 ` [PATCH 3/3] iio: cros_ec_activity: add ChromeOS EC Activity Sensors Thierry Escande
2016-12-07 2:15 ` kbuild test robot
2016-12-18 16:37 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480929198-13671-2-git-send-email-thierry.escande@collabora.com \
--to=thierry.escande@collabora.com \
--cc=gwendal@chromium.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®