From: Thierry Escande <thierry.escande@collabora.com>
To: Jonathan Cameron <jic23@kernel.org>,
Gwendal Grignou <gwendal@chromium.org>
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org
Subject: [PATCH 3/3] iio: cros_ec_activity: add ChromeOS EC Activity Sensors
Date: Mon, 5 Dec 2016 10:13:18 +0100 [thread overview]
Message-ID: <1480929198-13671-4-git-send-email-thierry.escande@collabora.com> (raw)
In-Reply-To: <1480929198-13671-1-git-send-email-thierry.escande@collabora.com>
From: Gwendal Grignou <gwendal@chromium.org>
This patch adds a driver for handling activity/gesture recognition
coming from the EC. Only significant motion is currently supported. It
is an incomplete driver: activity can be set, but ring buffer must be
used to receive interruption.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
---
drivers/iio/common/cros_ec_sensors/Kconfig | 10 +
drivers/iio/common/cros_ec_sensors/Makefile | 1 +
.../iio/common/cros_ec_sensors/cros_ec_activity.c | 300 +++++++++++++++++++++
.../common/cros_ec_sensors/cros_ec_sensors_core.c | 24 ++
.../common/cros_ec_sensors/cros_ec_sensors_core.h | 1 +
5 files changed, 336 insertions(+)
create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_activity.c
diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
index 3349c9d..0a64928 100644
--- a/drivers/iio/common/cros_ec_sensors/Kconfig
+++ b/drivers/iio/common/cros_ec_sensors/Kconfig
@@ -21,3 +21,13 @@ config IIO_CROS_EC_SENSORS
Accelerometers, Gyroscope and Magnetometer that are
presented by the ChromeOS EC Sensor hub.
Creates an IIO device for each functions.
+
+config IIO_CROS_EC_ACTIVITY
+ tristate "ChromeOS EC Activity Sensors"
+ select IIO_CROS_EC_SENSORS_CORE
+ help
+ Module to handle activity events detections presented by the ChromeOS
+ EC Sensor hub.
+ Activities can be simple (low/no motion) or more complex (riding train).
+ They are being reported by physical devices or the EC itself.
+ Creates an IIO device to manage all activities.
diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
index ec716ff..a4a2d6c 100644
--- a/drivers/iio/common/cros_ec_sensors/Makefile
+++ b/drivers/iio/common/cros_ec_sensors/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
+obj-$(CONFIG_IIO_CROS_EC_ACTIVITY) += cros_ec_activity.o
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_activity.c b/drivers/iio/common/cros_ec_sensors/cros_ec_activity.c
new file mode 100644
index 0000000..f14c3d3
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_activity.c
@@ -0,0 +1,300 @@
+/*
+ * cros_ec_sensors_activity - Driver for activities/gesture recognition.
+ *
+ * Copyright (C) 2015 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This driver uses the cros-ec interface to communicate with the Chrome OS
+ * EC about accelerometer data. Accelerometer access is presented through
+ * iio sysfs.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include "cros_ec_sensors_core.h"
+
+#define DRV_NAME "cros-ec-activity"
+
+/* st data for ec_sensors iio driver. */
+struct cros_ec_sensors_state {
+ /* Shared by all sensors */
+ struct cros_ec_sensors_core_state core;
+
+ struct iio_chan_spec *channels;
+ unsigned int nb_activities;
+};
+
+static const struct iio_event_spec cros_ec_activity_single_shot[] = {
+ {
+ .type = IIO_EV_TYPE_CHANGE,
+ /* significant motion trigger when we get out of still. */
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ },
+};
+
+static int ec_sensors_read(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ dev_warn(&indio_dev->dev, "%s: Not Expected: %d\n", __func__,
+ chan->channel2);
+
+ return -EPERM;
+}
+
+static int ec_sensors_write(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ dev_warn(&indio_dev->dev, "%s: Not Expected: %d\n", __func__,
+ chan->channel2);
+
+ return -EPERM;
+}
+
+static int cros_ec_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+ int ret;
+
+ if (chan->type != IIO_ACTIVITY)
+ return -EINVAL;
+
+ mutex_lock(&st->core.cmd_lock);
+
+ st->core.param.cmd = MOTIONSENSE_CMD_LIST_ACTIVITIES;
+
+ if (cros_ec_motion_send_host_cmd(&st->core, 0) != EC_RES_SUCCESS) {
+ ret = -EIO;
+ goto exit;
+ }
+
+ switch (chan->channel2) {
+ case IIO_MOD_STILL:
+ ret = !!(st->core.resp->list_activities.enabled &
+ (1 << MOTIONSENSE_ACTIVITY_SIG_MOTION));
+ break;
+ case IIO_MOD_DOUBLE_TAP:
+ ret = !!(st->core.resp->list_activities.enabled &
+ (1 << MOTIONSENSE_ACTIVITY_DOUBLE_TAP));
+ break;
+ default:
+ dev_warn(&indio_dev->dev, "Unknown activity: %d\n",
+ chan->channel2);
+ ret = -EINVAL;
+ }
+
+exit:
+ mutex_unlock(&st->core.cmd_lock);
+
+ return ret;
+}
+
+static int cros_ec_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir, int state)
+{
+ struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+ int ret;
+
+ if (chan->type != IIO_ACTIVITY)
+ return -EINVAL;
+
+ mutex_lock(&st->core.cmd_lock);
+ st->core.param.cmd = MOTIONSENSE_CMD_SET_ACTIVITY;
+
+ switch (chan->channel2) {
+ case IIO_MOD_STILL:
+ st->core.param.set_activity.activity =
+ MOTIONSENSE_ACTIVITY_SIG_MOTION;
+ break;
+ case IIO_MOD_DOUBLE_TAP:
+ st->core.param.set_activity.activity =
+ MOTIONSENSE_ACTIVITY_DOUBLE_TAP;
+ break;
+ default:
+ dev_warn(&indio_dev->dev, "Unknown activity: %d\n",
+ chan->channel2);
+ }
+
+ st->core.param.set_activity.enable = state;
+
+ ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+
+ mutex_unlock(&st->core.cmd_lock);
+
+ return ret;
+}
+
+/* Not implemented */
+static int cros_ec_read_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
+ dev_warn(&indio_dev->dev, "%s: Not Expected: %d\n", __func__,
+ chan->channel2);
+
+ return -EPERM;
+}
+
+static int cros_ec_write_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ dev_warn(&indio_dev->dev, "%s: Not Expected: %d\n", __func__,
+ chan->channel2);
+
+ return -EPERM;
+}
+
+static const struct iio_info ec_sensors_info = {
+ .read_raw = &ec_sensors_read,
+ .write_raw = &ec_sensors_write,
+ .read_event_config = cros_ec_read_event_config,
+ .write_event_config = cros_ec_write_event_config,
+ .read_event_value = cros_ec_read_event_value,
+ .write_event_value = cros_ec_write_event_value,
+};
+
+static int cros_ec_sensors_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
+ struct cros_ec_device *ec_device;
+ struct iio_dev *indio_dev;
+ struct cros_ec_sensors_state *st;
+ struct iio_chan_spec *channel;
+ unsigned long activities;
+ int i, index, ret, nb_activities;
+
+ if (!ec_dev || !ec_dev->ec_dev) {
+ dev_warn(&pdev->dev, "No CROS EC device found.\n");
+ return -EINVAL;
+ }
+
+ ec_device = ec_dev->ec_dev;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+ if (ret)
+ return ret;
+
+ indio_dev->info = &ec_sensors_info;
+ st = iio_priv(indio_dev);
+ st->core.type = st->core.resp->info.type;
+ st->core.loc = st->core.resp->info.location;
+
+ /* List all available activities */
+ st->core.param.cmd = MOTIONSENSE_CMD_LIST_ACTIVITIES;
+ ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+ if (ret)
+ return ret;
+
+ activities = st->core.resp->list_activities.enabled |
+ st->core.resp->list_activities.disabled;
+ nb_activities = hweight_long(activities) + 1;
+
+ if (!activities)
+ return -ENODEV;
+
+ /* Allocate a channel per activity and one for timestamp */
+ st->channels = devm_kcalloc(&pdev->dev, nb_activities,
+ sizeof(*st->channels), GFP_KERNEL);
+ if (!st->channels)
+ return -ENOMEM;
+
+ channel = &st->channels[0];
+ index = 0;
+ for_each_set_bit(i, &activities, BITS_PER_LONG) {
+ channel->scan_index = index;
+
+ /* List all available activities */
+ channel->type = IIO_ACTIVITY;
+ channel->modified = 1;
+ channel->event_spec = cros_ec_activity_single_shot;
+ channel->num_event_specs =
+ ARRAY_SIZE(cros_ec_activity_single_shot);
+ switch (i) {
+ case MOTIONSENSE_ACTIVITY_SIG_MOTION:
+ channel->channel2 = IIO_MOD_STILL;
+ break;
+ case MOTIONSENSE_ACTIVITY_DOUBLE_TAP:
+ channel->channel2 = IIO_MOD_DOUBLE_TAP;
+ break;
+ default:
+ dev_warn(&pdev->dev, "Unknown activity: %d\n", i);
+ continue;
+ }
+ channel->ext_info = cros_ec_sensors_limited_info;
+ channel++;
+ index++;
+ }
+
+ /* Timestamp */
+ channel->scan_index = index;
+ channel->type = IIO_TIMESTAMP;
+ channel->channel = -1;
+ channel->scan_type.sign = 's';
+ channel->scan_type.realbits = 64;
+ channel->scan_type.storagebits = 64;
+
+ indio_dev->channels = st->channels;
+ indio_dev->num_channels = index + 1;
+
+ st->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
+
+ /* Driver is incomplete: by itself, no way to get event directly */
+ return iio_device_register(indio_dev);
+}
+
+static int cros_ec_sensors_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+ iio_device_unregister(indio_dev);
+
+ return 0;
+}
+
+static struct platform_driver cros_ec_sensors_platform_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = cros_ec_sensors_probe,
+ .remove = cros_ec_sensors_remove,
+};
+module_platform_driver(cros_ec_sensors_platform_driver);
+
+MODULE_DESCRIPTION("ChromeOS EC activity sensors driver");
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index a3be799..6010718 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -135,6 +135,15 @@ static ssize_t cros_ec_sensors_calibrate(struct iio_dev *indio_dev,
return ret ? ret : len;
}
+static ssize_t cros_ec_sensors_id(struct iio_dev *indio_dev,
+ uintptr_t private, const struct iio_chan_spec *chan,
+ char *buf)
+{
+ struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", st->param.info.sensor_num);
+}
+
static ssize_t cros_ec_sensors_loc(struct iio_dev *indio_dev,
uintptr_t private, const struct iio_chan_spec *chan,
char *buf)
@@ -159,6 +168,21 @@ const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[] = {
};
EXPORT_SYMBOL_GPL(cros_ec_sensors_ext_info);
+const struct iio_chan_spec_ext_info cros_ec_sensors_limited_info[] = {
+ {
+ .name = "id",
+ .shared = IIO_SHARED_BY_ALL,
+ .read = cros_ec_sensors_id
+ },
+ {
+ .name = "location",
+ .shared = IIO_SHARED_BY_ALL,
+ .read = cros_ec_sensors_loc
+ },
+ { },
+};
+EXPORT_SYMBOL_GPL(cros_ec_sensors_limited_info);
+
/**
* cros_ec_sensors_idx_to_reg - convert index into offset in shared memory
* @st: pointer to state information for device
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
index 8bc2ca3..b785f2b 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
@@ -171,5 +171,6 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
/* List of extended channel specification for all sensors */
extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[];
+extern const struct iio_chan_spec_ext_info cros_ec_sensors_limited_info[];
#endif /* __CROS_EC_SENSORS_CORE_H */
--
2.7.4
next prev parent reply other threads:[~2016-12-05 9:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-05 9:13 [PATCH 0/3] Add ChromeOS EC Activity Sensors driver Thierry Escande
2016-12-05 9:13 ` [PATCH 1/3] mfd: cros_ec: Add activity motion sense definitions Thierry Escande
2017-01-03 15:51 ` Lee Jones
2016-12-05 9:13 ` [PATCH 2/3] iio: core: Add double tap as possible gesture Thierry Escande
2016-12-06 11:25 ` Peter Meerwald-Stadler
2016-12-19 21:11 ` Jonathan Cameron
2017-06-08 1:10 ` Gwendal Grignou
2017-06-11 14:46 ` Jonathan Cameron
2016-12-05 9:13 ` Thierry Escande [this message]
2016-12-07 2:15 ` [PATCH 3/3] iio: cros_ec_activity: add ChromeOS EC Activity Sensors kbuild test robot
2016-12-18 16:37 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480929198-13671-4-git-send-email-thierry.escande@collabora.com \
--to=thierry.escande@collabora.com \
--cc=gwendal@chromium.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®