mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <kishon@ti.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 09/14] phy: qcom-ufs: Remove -always-on property
Date: Mon, 30 Jan 2017 17:19:41 +0530	[thread overview]
Message-ID: <1485776992-8818-19-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1485776992-8818-1-git-send-email-kishon@ti.com>

From: Bjorn Andersson <bjorn.andersson@linaro.org>

The fact that a regulator is always-on is a property of the regulator,
not a specific consumer. Implementing this in the driver leads to a
system behaviour that is dependent on if the Qualcomm UFS PHY was ever
(partially) probed.

If the specific regulator should be always on in a particular device,
mark it so by specifying "regulator-always-on" in the regulator node.

Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/ufs/ufs-qcom.txt |    1 -
 drivers/phy/phy-qcom-ufs-i.h                       |    1 -
 drivers/phy/phy-qcom-ufs.c                         |    5 +----
 3 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
index b6b5130..1f69ee1 100644
--- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
+++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
@@ -29,7 +29,6 @@ Optional properties:
 - vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
 - vddp-ref-clk-supply   : phandle to UFS device ref_clk pad power supply
 - vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
-- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on
 
 Example:
 
diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/phy-qcom-ufs-i.h
index d505d98..13b02b7 100644
--- a/drivers/phy/phy-qcom-ufs-i.h
+++ b/drivers/phy/phy-qcom-ufs-i.h
@@ -77,7 +77,6 @@ struct ufs_qcom_phy_vreg {
 	int min_uV;
 	int max_uV;
 	bool enabled;
-	bool is_always_on;
 };
 
 struct ufs_qcom_phy {
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
index bbd3171..c145fa6 100644
--- a/drivers/phy/phy-qcom-ufs.c
+++ b/drivers/phy/phy-qcom-ufs.c
@@ -242,9 +242,6 @@ static int ufs_qcom_phy_init_vreg(struct device *dev,
 			}
 			err = 0;
 		}
-		snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name);
-		vreg->is_always_on = of_property_read_bool(dev->of_node,
-							   prop_name);
 	}
 
 	if (!strcmp(name, "vdda-pll")) {
@@ -402,7 +399,7 @@ static int ufs_qcom_phy_disable_vreg(struct device *dev,
 {
 	int ret = 0;
 
-	if (!vreg || !vreg->enabled || vreg->is_always_on)
+	if (!vreg || !vreg->enabled)
 		goto out;
 
 	ret = regulator_disable(vreg->reg);
-- 
1.7.9.5

  parent reply	other threads:[~2017-01-30 13:29 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-30 11:49 [GIT PULL] phy: for 4.11 Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 01/15] phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 01/14] phy: sun4i-usb: add support for V3s USB PHY Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 02/14] phy: rcar-gen3-usb2: Replace the deprecated extcon API Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 02/15] phy: sun4i-usb: add support for V3s USB PHY Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 03/15] phy: rcar-gen3-usb2: Replace the deprecated extcon API Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 03/14] phy: sun4i-usb: " Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 04/14] drivers: phy: constify phy_ops structures Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 04/15] phy: sun4i-usb: Replace the deprecated extcon API Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 05/15] drivers: phy: constify phy_ops structures Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 05/14] phy: Add support for Qualcomm's USB HSIC phy Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 06/14] phy: Add support for Qualcomm's USB HS phy Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 06/15] phy: Add support for Qualcomm's USB HSIC phy Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 07/15] phy: Add support for Qualcomm's USB HS phy Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 07/14] phy: qcom-ufs: Don't kfree devres resource Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 08/15] " Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 09/15] phy: qcom-ufs: Correct usage of regulator_get() Kishon Vijay Abraham I
2017-01-30 11:49 ` Kishon Vijay Abraham I [this message]
2017-01-30 11:49 ` [PATCH 10/15] phy: qcom-ufs: Remove -always-on property Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 10/14] phy: qcom-ufs: Suppress extraneous logging Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 11/14] dt-bindings: phy: Add documentation for NSP USB3 PHY Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 11/15] phy: qcom-ufs: Suppress extraneous logging Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 12/15] dt-bindings: phy: Add documentation for NSP USB3 PHY Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 12/14] phy: Add USB3 PHY support for Broadcom NSP SoC Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 13/15] " Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 13/14] phy: fix rockchip-inno-usb2 build errors Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 14/15] " Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 14/14] phy: qcom-ufs: Fix misplaced jump label Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 15/15] " Kishon Vijay Abraham I
2017-01-31  9:53 ` [GIT PULL] phy: for 4.11 Greg KH
2017-01-31 10:03   ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1485776992-8818-19-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome