From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <kishon@ti.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 03/14] phy: sun4i-usb: Replace the deprecated extcon API
Date: Mon, 30 Jan 2017 17:19:29 +0530 [thread overview]
Message-ID: <1485776992-8818-7-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1485776992-8818-1-git-send-email-kishon@ti.com>
From: Chanwoo Choi <cw00.choi@samsung.com>
This patch replaces the deprecated extcon API as following:
- extcon_set_cable_state_() -> extcon_set_state_sync()
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-sun4i-usb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 4102841..a21b5f2 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -536,7 +536,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
mutex_unlock(&phy0->mutex);
if (id_notify) {
- extcon_set_cable_state_(data->extcon, EXTCON_USB_HOST,
+ extcon_set_state_sync(data->extcon, EXTCON_USB_HOST,
!id_det);
/* When leaving host mode force end the session here */
if (force_session_end && id_det == 1) {
@@ -549,7 +549,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
}
if (vbus_notify)
- extcon_set_cable_state_(data->extcon, EXTCON_USB, vbus_det);
+ extcon_set_state_sync(data->extcon, EXTCON_USB, vbus_det);
if (sun4i_usb_phy0_poll(data))
queue_delayed_work(system_wq, &data->detect, POLL_TIME);
--
1.7.9.5
next prev parent reply other threads:[~2017-01-30 11:52 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-30 11:49 [GIT PULL] phy: for 4.11 Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 01/15] phy: rockchip-inno-usb2: Set EXTCON_USB when EXTCON_CHG_USB_SDP was set Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 01/14] phy: sun4i-usb: add support for V3s USB PHY Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 02/14] phy: rcar-gen3-usb2: Replace the deprecated extcon API Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 02/15] phy: sun4i-usb: add support for V3s USB PHY Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 03/15] phy: rcar-gen3-usb2: Replace the deprecated extcon API Kishon Vijay Abraham I
2017-01-30 11:49 ` Kishon Vijay Abraham I [this message]
2017-01-30 11:49 ` [PATCH 04/14] drivers: phy: constify phy_ops structures Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 04/15] phy: sun4i-usb: Replace the deprecated extcon API Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 05/15] drivers: phy: constify phy_ops structures Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 05/14] phy: Add support for Qualcomm's USB HSIC phy Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 06/14] phy: Add support for Qualcomm's USB HS phy Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 06/15] phy: Add support for Qualcomm's USB HSIC phy Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 07/15] phy: Add support for Qualcomm's USB HS phy Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 07/14] phy: qcom-ufs: Don't kfree devres resource Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 08/15] " Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 09/15] phy: qcom-ufs: Correct usage of regulator_get() Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 09/14] phy: qcom-ufs: Remove -always-on property Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 10/15] " Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 10/14] phy: qcom-ufs: Suppress extraneous logging Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 11/14] dt-bindings: phy: Add documentation for NSP USB3 PHY Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 11/15] phy: qcom-ufs: Suppress extraneous logging Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 12/15] dt-bindings: phy: Add documentation for NSP USB3 PHY Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 12/14] phy: Add USB3 PHY support for Broadcom NSP SoC Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 13/15] " Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 13/14] phy: fix rockchip-inno-usb2 build errors Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 14/15] " Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 14/14] phy: qcom-ufs: Fix misplaced jump label Kishon Vijay Abraham I
2017-01-30 11:49 ` [PATCH 15/15] " Kishon Vijay Abraham I
2017-01-31 9:53 ` [GIT PULL] phy: for 4.11 Greg KH
2017-01-31 10:03 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485776992-8818-7-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome