[PATCH 2/6] x86/intel_rdt: Add L2 Code and Data Prioritization (CDP) support in documentation

["Fenghua Yu" <fenghua.yu@intel.com>]

From: Fenghua Yu <fenghua.yu@intel.com>

A new mount parameter "cdpl2" is added to enable L2 CDP in documentation.
The legacy mount parameter "cdp" is still used to enable L3 CDP.

L2 and L3 CDP can be enabled separately.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 Documentation/x86/intel_rdt_ui.txt | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/x86/intel_rdt_ui.txt b/Documentation/x86/intel_rdt_ui.txt
index 1ad77b1..86bc5b2 100644
--- a/Documentation/x86/intel_rdt_ui.txt
+++ b/Documentation/x86/intel_rdt_ui.txt
@@ -10,18 +10,22 @@ This feature is enabled by the CONFIG_INTEL_RDT Kconfig and the
 X86 /proc/cpuinfo flag bits:
 RDT (Resource Director Technology) Allocation - "rdt_a"
 CAT (Cache Allocation Technology) - "cat_l3", "cat_l2"
-CDP (Code and Data Prioritization ) - "cdp_l3"
+CDP (Code and Data Prioritization ) - "cdp_l3", "cdp_l2"
 CQM (Cache QoS Monitoring) - "cqm_llc", "cqm_occup_llc"
 MBM (Memory Bandwidth Monitoring) - "cqm_mbm_total", "cqm_mbm_local"
 MBA (Memory Bandwidth Allocation) - "mba"
 
 To use the feature mount the file system:
 
- # mount -t resctrl resctrl [-o cdp] /sys/fs/resctrl
+ # mount -t resctrl resctrl [-o cdp[,cdpl2]] /sys/fs/resctrl
 
 mount options are:
 
 "cdp": Enable code/data prioritization in L3 cache allocations.
+"cdpl2": Enable code/data prioritization in L2 cache allocations.
+
+Please note: We keep the "cdp" option for enabling L3 CDP to maintain
+legacy interface. L2 and L3 CDP can be enabled separately.
 
 RDT features are orthogonal. A particular system may support only
 monitoring, only control, or both monitoring and control.
-- 
1.8.3.1