[PATCH 0/8] reset: Use regmap_test_bits to simplify status callbacks

[PATCH 0/8] reset: Use regmap_test_bits to simplify status callbacks

[Philipp Zabel]

A lot of the regmap reset controller drivers open-code a variant
of regmap_test_bits() in their status callback function. Simplify
them by calling regmap_test_bits() instead.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Philipp Zabel (8):
      reset: a10sr: Use regmap_test_bits in a10sr_reset_status
      reset: reset-intel-gw: Use regmap_reset_bits in intel_reset_status
      reset: k210: Use regmap_test_bits in k210_rst_status
      reset: lantiq: Use regmap_test_bits in lantiq_rcu_reset_status
      reset: mpfs: Use regmap_test_bits in mpfs_status
      reset: rzv2h-usb2phy: Use regmap_test_bits in rzv2h_usbphy_reset_status
      reset: zynq: Use regmap_test_bits in zynq_reset_status
      reset: tn48m: Use regmap_test_bits in tn48m_control_status

 drivers/reset/reset-a10sr.c         | 8 +-------
 drivers/reset/reset-intel-gw.c      | 9 ++-------
 drivers/reset/reset-k210.c          | 8 +-------
 drivers/reset/reset-lantiq.c        | 8 +-------
 drivers/reset/reset-mpfs.c          | 9 +--------
 drivers/reset/reset-rzv2h-usb2phy.c | 6 ++----
 drivers/reset/reset-tn48m.c         | 8 ++------
 drivers/reset/reset-zynq.c          | 8 +-------
 8 files changed, 11 insertions(+), 53 deletions(-)
---
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
change-id: 20261103-reset-regmap-test-bits-17cb2ba9840f

Best regards,
--  
Philipp Zabel <p.zabel@pengutronix.de>

[PATCH 1/8] reset: a10sr: Use regmap_test_bits in a10sr_reset_status

[Philipp Zabel]

Simplify a10sr_reset_status() by using regmap_test_bits().
ALTR_A10SR_REG_BIT_MASK() is a single-bit mask, so no functional change.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/reset/reset-a10sr.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/reset/reset-a10sr.c b/drivers/reset/reset-a10sr.c
index 99b3bc8382f3..3285f68a72fe 100644
--- a/drivers/reset/reset-a10sr.c
+++ b/drivers/reset/reset-a10sr.c
@@ -67,18 +67,12 @@ static int a10sr_reset_deassert(struct reset_controller_dev *rcdev,
 static int a10sr_reset_status(struct reset_controller_dev *rcdev,
 			      unsigned long id)
 {
-	int ret;
 	struct a10sr_reset *a10r = to_a10sr_rst(rcdev);
 	int offset = a10sr_reset_shift(id);
 	u8 mask = ALTR_A10SR_REG_BIT_MASK(offset);
 	int index = ALTR_A10SR_HPS_RST_REG + ALTR_A10SR_REG_OFFSET(offset);
-	unsigned int value;
 
-	ret = regmap_read(a10r->regmap, index, &value);
-	if (ret < 0)
-		return ret;
-
-	return !!(value & mask);
+	return regmap_test_bits(a10r->regmap, index, mask);
 }
 
 static const struct reset_control_ops a10sr_reset_ops = {

-- 
2.47.3

[PATCH 2/8] reset: reset-intel-gw: Use regmap_reset_bits in intel_reset_status

[Philipp Zabel]

Simplify intel_reset_status() by using regmap_test_bits().
No functional change.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/reset/reset-intel-gw.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/reset/reset-intel-gw.c b/drivers/reset/reset-intel-gw.c
index 0db64cc8a282..4cac2a8b0108 100644
--- a/drivers/reset/reset-intel-gw.c
+++ b/drivers/reset/reset-intel-gw.c
@@ -112,16 +112,11 @@ static int intel_reset_status(struct reset_controller_dev *rcdev,
 			      unsigned long id)
 {
 	struct intel_reset_data *data = to_reset_data(rcdev);
-	u32 rst_req, req_bit, rst_stat, stat_bit, val;
-	int ret;
+	u32 rst_req, req_bit, rst_stat, stat_bit;
 
 	rst_stat = id_to_reg_and_bit_offsets(data, id, &rst_req,
 					     &req_bit, &stat_bit);
-	ret = regmap_read(data->regmap, rst_stat, &val);
-	if (ret)
-		return ret;
-
-	return !!(val & BIT(stat_bit));
+	return regmap_test_bits(data->regmap, rst_stat, BIT(stat_bit));
 }
 
 static const struct reset_control_ops intel_reset_ops = {

-- 
2.47.3

[PATCH 3/8] reset: k210: Use regmap_test_bits in k210_rst_status

[Philipp Zabel]

Simplify k210_rst_status() by using regmap_test_bits().
Now returns 1 if asserted for all bits.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/reset/reset-k210.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/reset/reset-k210.c b/drivers/reset/reset-k210.c
index e77e4cca377d..58ad8be18741 100644
--- a/drivers/reset/reset-k210.c
+++ b/drivers/reset/reset-k210.c
@@ -59,14 +59,8 @@ static int k210_rst_status(struct reset_controller_dev *rcdev,
 			   unsigned long id)
 {
 	struct k210_rst *ksr = to_k210_rst(rcdev);
-	u32 reg, bit = BIT(id);
-	int ret;
 
-	ret = regmap_read(ksr->map, K210_SYSCTL_PERI_RESET, &reg);
-	if (ret)
-		return ret;
-
-	return reg & bit;
+	return regmap_test_bits(ksr->map, K210_SYSCTL_PERI_RESET, BIT(id));
 }
 
 static int k210_rst_xlate(struct reset_controller_dev *rcdev,

-- 
2.47.3

Re: [PATCH 3/8] reset: k210: Use regmap_test_bits in k210_rst_status

[Damien Le Moal]

On 11/3/26 23:51, Philipp Zabel wrote:
> Simplify k210_rst_status() by using regmap_test_bits().
> Now returns 1 if asserted for all bits.
> 
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Reviewed-by: Damien Le Moal <dlemoal@kernel.org>

-- 
Damien Le Moal
Western Digital Research

[PATCH 4/8] reset: lantiq: Use regmap_test_bits in lantiq_rcu_reset_status

[Philipp Zabel]

Simplify lantiq_rcu_reset_status() by using regmap_test_bits().
No functional change.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/reset/reset-lantiq.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/reset/reset-lantiq.c b/drivers/reset/reset-lantiq.c
index 652a45890cb2..6d7200b17790 100644
--- a/drivers/reset/reset-lantiq.c
+++ b/drivers/reset/reset-lantiq.c
@@ -37,14 +37,8 @@ static int lantiq_rcu_reset_status(struct reset_controller_dev *rcdev,
 {
 	struct lantiq_rcu_reset_priv *priv = to_lantiq_rcu_reset_priv(rcdev);
 	unsigned int status = (id >> 8) & 0x1f;
-	u32 val;
-	int ret;
 
-	ret = regmap_read(priv->regmap, priv->status_offset, &val);
-	if (ret)
-		return ret;
-
-	return !!(val & BIT(status));
+	return regmap_test_bits(priv->regmap, priv->status_offset, BIT(status));
 }
 
 static int lantiq_rcu_reset_status_timeout(struct reset_controller_dev *rcdev,

-- 
2.47.3

[PATCH 5/8] reset: mpfs: Use regmap_test_bits in mpfs_status

[Philipp Zabel]

Simplify mpfs_status() by using regmap_test_bits().
Now returns 1 if asserted for all bits.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/reset/reset-mpfs.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/reset/reset-mpfs.c b/drivers/reset/reset-mpfs.c
index 8ffcc54ee6f6..ec61b4a1d753 100644
--- a/drivers/reset/reset-mpfs.c
+++ b/drivers/reset/reset-mpfs.c
@@ -63,15 +63,8 @@ static int mpfs_deassert(struct reset_controller_dev *rcdev, unsigned long id)
 static int mpfs_status(struct reset_controller_dev *rcdev, unsigned long id)
 {
 	struct mpfs_reset *rst = to_mpfs_reset(rcdev);
-	u32 reg;
 
-	regmap_read(rst->regmap, REG_SUBBLK_RESET_CR, &reg);
-
-	/*
-	 * It is safe to return here as MPFS_NUM_RESETS makes sure the sign bit
-	 * is never hit.
-	 */
-	return (reg & BIT(id));
+	return regmap_test_bits(rst->regmap, REG_SUBBLK_RESET_CR, BIT(id));
 }
 
 static int mpfs_reset(struct reset_controller_dev *rcdev, unsigned long id)

-- 
2.47.3

[PATCH 6/8] reset: rzv2h-usb2phy: Use regmap_test_bits in rzv2h_usbphy_reset_status

[Philipp Zabel]

Simplify rzv2h_usbphy_reset_status() by using regmap_test_bits().
No functional change.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/reset/reset-rzv2h-usb2phy.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/reset/reset-rzv2h-usb2phy.c b/drivers/reset/reset-rzv2h-usb2phy.c
index d96042e28cd5..e644092cc2f7 100644
--- a/drivers/reset/reset-rzv2h-usb2phy.c
+++ b/drivers/reset/reset-rzv2h-usb2phy.c
@@ -68,11 +68,9 @@ static int rzv2h_usbphy_reset_status(struct reset_controller_dev *rcdev,
 				     unsigned long id)
 {
 	struct rzv2h_usb2phy_reset_priv *priv = rzv2h_usbphy_rcdev_to_priv(rcdev);
-	u32 reg;
 
-	regmap_read(priv->regmap, priv->data->reset_reg, &reg);
-
-	return (reg & priv->data->reset_status_bits) == priv->data->reset_status_bits;
+	return regmap_test_bits(priv->regmap, priv->data->reset_reg,
+				priv->data->reset_status_bits);
 }
 
 static const struct reset_control_ops rzv2h_usbphy_reset_ops = {

-- 
2.47.3

[PATCH 7/8] reset: zynq: Use regmap_test_bits in zynq_reset_status

[Philipp Zabel]

Simplify zynq_reset_status() by using regmap_test_bits().
No functional change.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/reset/reset-zynq.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/reset/reset-zynq.c b/drivers/reset/reset-zynq.c
index 688b512882ec..b7a0445aafcf 100644
--- a/drivers/reset/reset-zynq.c
+++ b/drivers/reset/reset-zynq.c
@@ -67,17 +67,11 @@ static int zynq_reset_status(struct reset_controller_dev *rcdev,
 
 	int bank = id / BITS_PER_LONG;
 	int offset = id % BITS_PER_LONG;
-	int ret;
-	u32 reg;
 
 	pr_debug("%s: %s reset bank %u offset %u\n", KBUILD_MODNAME, __func__,
 		 bank, offset);
 
-	ret = regmap_read(priv->slcr, priv->offset + (bank * 4), &reg);
-	if (ret)
-		return ret;
-
-	return !!(reg & BIT(offset));
+	return regmap_test_bits(priv->slcr, priv->offset + (bank * 4), BIT(offset));
 }
 
 static const struct reset_control_ops zynq_reset_ops = {

-- 
2.47.3

[PATCH 8/8] reset: tn48m: Use regmap_test_bits in tn48m_control_status

[Philipp Zabel]

Simplify tn48m_control_status() by using regmap_test_bits().
No functional change.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/reset/reset-tn48m.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/reset/reset-tn48m.c b/drivers/reset/reset-tn48m.c
index 177ee5127a1e..4c7d7ef7c7a9 100644
--- a/drivers/reset/reset-tn48m.c
+++ b/drivers/reset/reset-tn48m.c
@@ -66,17 +66,13 @@ static int tn48m_control_status(struct reset_controller_dev *rcdev,
 				unsigned long id)
 {
 	struct tn48_reset_data *data = to_tn48_reset_data(rcdev);
-	unsigned int regval;
 	int ret;
 
-	ret = regmap_read(data->regmap, TN48M_RESET_REG, &regval);
+	ret = regmap_test_bits(data->regmap, TN48M_RESET_REG, BIT(tn48m_resets[id].bit));
 	if (ret < 0)
 		return ret;
 
-	if (BIT(tn48m_resets[id].bit) & regval)
-		return 0;
-	else
-		return 1;
+	return !ret;
 }
 
 static const struct reset_control_ops tn48_reset_ops = {

-- 
2.47.3