From: Kuogee Hsieh <quic_khsieh@quicinc.com>
To: <robdclark@gmail.com>, <sean@poorly.run>, <swboyd@chromium.org>,
<dianders@chromium.org>, <vkoul@kernel.org>, <daniel@ffwll.ch>,
<airlied@gmail.com>, <agross@kernel.org>,
<dmitry.baryshkov@linaro.org>, <andersson@kernel.org>
Cc: <quic_abhinavk@quicinc.com>, <quic_khsieh@quicinc.com>,
<quic_sbillaka@quicinc.com>, <freedreno@lists.freedesktop.org>,
<dri-devel@lists.freedesktop.org>,
<linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v2] drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer
Date: Thu, 15 Dec 2022 10:32:39 -0800 [thread overview]
Message-ID: <1671129159-31105-1-git-send-email-quic_khsieh@quicinc.com> (raw)
There are 3 possible interrupt sources are handled by DP controller,
HPDstatus, Controller state changes and Aux read/write transaction.
At every irq, DP controller have to check isr status of every interrupt
sources and service the interrupt if its isr status bits shows interrupts
are pending. There is potential race condition may happen at current aux
isr handler implementation since it is always complete dp_aux_cmd_fifo_tx()
even irq is not for aux read or write transaction. This may cause aux read
transaction return premature if host aux data read is in the middle of
waiting for sink to complete transferring data to host while irq happen.
This will cause host's receiving buffer contains unexpected data. This
patch fixes this problem by checking aux isr and return immediately at
aux isr handler if there are no any isr status bits set.
Current there is a bug report regrading eDP edid corruption happen during
system booting up. After lengthy debugging to found that VIDEO_READY
interrupt was continuously firing during system booting up which cause
dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data
from aux hardware buffer which is not yet contains complete data transfer
from sink. This cause edid corruption.
Follows are the signature at kernel logs when problem happen,
EDID has corrupt header
panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID
panel-simple-dp-aux aux-aea0000.edp: error -EIO: Couldn't detect panel nor find a fallback
Changes in v2:
-- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr()
-- add more commit text
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
---
drivers/gpu/drm/msm/dp/dp_aux.c | 87 +++++++++++++++++++++++++++++------------
1 file changed, 63 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
index d030a93..f31e5c1 100644
--- a/drivers/gpu/drm/msm/dp/dp_aux.c
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -162,45 +162,78 @@ static ssize_t dp_aux_cmd_fifo_rx(struct dp_aux_private *aux,
return i;
}
-static void dp_aux_native_handler(struct dp_aux_private *aux, u32 isr)
+static irqreturn_t dp_aux_native_handler(struct dp_aux_private *aux, u32 isr)
{
- if (isr & DP_INTR_AUX_I2C_DONE)
+ irqreturn_t ret = IRQ_NONE;
+
+ if (isr & DP_INTR_AUX_I2C_DONE) {
aux->aux_error_num = DP_AUX_ERR_NONE;
- else if (isr & DP_INTR_WRONG_ADDR)
+ ret = IRQ_HANDLED;
+ } else if (isr & DP_INTR_WRONG_ADDR) {
aux->aux_error_num = DP_AUX_ERR_ADDR;
- else if (isr & DP_INTR_TIMEOUT)
+ ret = IRQ_HANDLED;
+ } else if (isr & DP_INTR_TIMEOUT) {
aux->aux_error_num = DP_AUX_ERR_TOUT;
- if (isr & DP_INTR_NACK_DEFER)
+ ret = IRQ_HANDLED;
+ }
+
+ if (isr & DP_INTR_NACK_DEFER) {
aux->aux_error_num = DP_AUX_ERR_NACK;
+ ret = IRQ_HANDLED;
+ }
+
if (isr & DP_INTR_AUX_ERROR) {
aux->aux_error_num = DP_AUX_ERR_PHY;
dp_catalog_aux_clear_hw_interrupts(aux->catalog);
+ ret = IRQ_HANDLED;
}
+
+ return ret;
}
-static void dp_aux_i2c_handler(struct dp_aux_private *aux, u32 isr)
+static irqreturn_t dp_aux_i2c_handler(struct dp_aux_private *aux, u32 isr)
{
+ irqreturn_t ret = IRQ_NONE;
+
if (isr & DP_INTR_AUX_I2C_DONE) {
if (isr & (DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER))
aux->aux_error_num = DP_AUX_ERR_NACK;
else
aux->aux_error_num = DP_AUX_ERR_NONE;
- } else {
- if (isr & DP_INTR_WRONG_ADDR)
- aux->aux_error_num = DP_AUX_ERR_ADDR;
- else if (isr & DP_INTR_TIMEOUT)
- aux->aux_error_num = DP_AUX_ERR_TOUT;
- if (isr & DP_INTR_NACK_DEFER)
- aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
- if (isr & DP_INTR_I2C_NACK)
- aux->aux_error_num = DP_AUX_ERR_NACK;
- if (isr & DP_INTR_I2C_DEFER)
- aux->aux_error_num = DP_AUX_ERR_DEFER;
- if (isr & DP_INTR_AUX_ERROR) {
- aux->aux_error_num = DP_AUX_ERR_PHY;
- dp_catalog_aux_clear_hw_interrupts(aux->catalog);
- }
+
+ return IRQ_HANDLED;
+ }
+
+ if (isr & DP_INTR_WRONG_ADDR) {
+ aux->aux_error_num = DP_AUX_ERR_ADDR;
+ ret = IRQ_HANDLED;
+ } else if (isr & DP_INTR_TIMEOUT) {
+ aux->aux_error_num = DP_AUX_ERR_TOUT;
+ ret = IRQ_HANDLED;
}
+
+ if (isr & DP_INTR_NACK_DEFER) {
+ aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
+ ret = IRQ_HANDLED;
+ }
+
+ if (isr & DP_INTR_I2C_NACK) {
+ aux->aux_error_num = DP_AUX_ERR_NACK;
+ ret = IRQ_HANDLED;
+ }
+
+ if (isr & DP_INTR_I2C_DEFER) {
+ aux->aux_error_num = DP_AUX_ERR_DEFER;
+ ret = IRQ_HANDLED;
+ }
+
+ if (isr & DP_INTR_AUX_ERROR) {
+ aux->aux_error_num = DP_AUX_ERR_PHY;
+ dp_catalog_aux_clear_hw_interrupts(aux->catalog);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
}
static void dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
@@ -413,6 +446,7 @@ void dp_aux_isr(struct drm_dp_aux *dp_aux)
{
u32 isr;
struct dp_aux_private *aux;
+ irqreturn_t ret = IRQ_NONE;
if (!dp_aux) {
DRM_ERROR("invalid input\n");
@@ -423,15 +457,20 @@ void dp_aux_isr(struct drm_dp_aux *dp_aux)
isr = dp_catalog_aux_get_irq(aux->catalog);
+ /* no interrupts pending, return immediately */
+ if (!isr)
+ return;
+
if (!aux->cmd_busy)
return;
if (aux->native)
- dp_aux_native_handler(aux, isr);
+ ret = dp_aux_native_handler(aux, isr);
else
- dp_aux_i2c_handler(aux, isr);
+ ret = dp_aux_i2c_handler(aux, isr);
- complete(&aux->comp);
+ if (ret == IRQ_HANDLED)
+ complete(&aux->comp);
}
void dp_aux_reconfig(struct drm_dp_aux *dp_aux)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2022-12-15 18:35 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-15 18:32 Kuogee Hsieh [this message]
2022-12-15 18:46 ` Dmitry Baryshkov
2022-12-15 20:10 ` Stephen Boyd
2022-12-15 20:12 ` Kuogee Hsieh
2022-12-15 21:15 ` Dmitry Baryshkov
2022-12-15 21:23 ` Kuogee Hsieh
2022-12-15 21:57 ` Abhinav Kumar
2022-12-15 20:30 ` Abhinav Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1671129159-31105-1-git-send-email-quic_khsieh@quicinc.com \
--to=quic_khsieh@quicinc.com \
--cc=agross@kernel.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=daniel@ffwll.ch \
--cc=dianders@chromium.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_sbillaka@quicinc.com \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
--cc=swboyd@chromium.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®