[PATCH 0/8] Add pmics supported in Qualcomm's SDX75 platform

[Rohit Agarwal <quic_rohiagar@quicinc.com>]

Hi,

This series add support of pmics that are found in SDX75 platform and
add the corresponding regulators in the IDP platform as well.
It also parallely updates the pmic found in SDX65 to PM7250b and add pinctrl
support for the same pmic chip.
This series is based on the new header inclusion[1] and movement of the
regulators level from rpmpd to rpmhpd[2].
This series can be picked after successfully picking [2] and [3] as [1] has
already been applied.

[1] https://lore.kernel.org/all/1689744162-9421-1-git-send-email-quic_rohiagar@quicinc.com/
[2] https://lore.kernel.org/all/1690781104-2290-1-git-send-email-quic_rohiagar@quicinc.com/
[3] https://lore.kernel.org/all/1690461813-22564-1-git-send-email-quic_rohiagar@quicinc.com/

Thanks,
Rohit.

Rohit Agarwal (8):
  arm64: dts: qcom: sdx75: Add spmi node
  arm64: dts: qcom: Add pinctrl gpio support for pm7250b
  arm64: dts: qcom: Add PMIC pm7550ba dtsi
  arm64: dts: qcom: Add PMIC pmx75 dtsi
  ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65
  arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
  arm64: dts: qcom: sdx75: Add rpmhpd node
  arm64: dts: qcom: sdx75-idp: Add regulator nodes

 arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts |   2 +-
 arch/arm64/boot/dts/qcom/pm7250b.dtsi     |  10 ++
 arch/arm64/boot/dts/qcom/pm7550ba.dtsi    |  70 ++++++++++
 arch/arm64/boot/dts/qcom/pmx75.dtsi       |  64 ++++++++++
 arch/arm64/boot/dts/qcom/sdx75-idp.dts    | 205 ++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdx75.dtsi       |  74 +++++++++++
 6 files changed, 424 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/qcom/pm7550ba.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pmx75.dtsi

-- 
2.7.4