From: Rob Herring <robh@kernel.org>
To: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: gregory.clement@bootlin.com, andrew@lunn.ch, lee@kernel.org,
devicetree@vger.kernel.org, andy.shevchenko@gmail.com,
sebastian.hesselbarth@gmail.com, conor+dt@kernel.org,
geert@linux-m68k.org, linux-leds@vger.kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
pavel@ucw.cz, ojeda@kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/3] auxdisplay: 7 segment LED display
Date: Mon, 26 Feb 2024 10:54:29 -0600 [thread overview]
Message-ID: <170896502255.859020.4639120006267962858.robh@kernel.org> (raw)
In-Reply-To: <20240225213423.690561-1-chris.packham@alliedtelesis.co.nz>
On Mon, 26 Feb 2024 10:34:20 +1300, Chris Packham wrote:
> This series adds a driver for a 7 segment LED display.
>
> I'd like to get some feedback on how this could be extended to support >1
> character. The driver as presented is sufficient for my hardware which only has
> a single character display but I can see that for this to be generically useful
> supporting more characters would be desireable.
>
> Earlier I posted an idea that the characters could be represended by
> sub-nodes[1] but there doesn't seem to be a way of having that and keeping the
> convenience of using devm_gpiod_get_array() (unless I've missed something).
>
> [1] - https://lore.kernel.org/lkml/2a8d19ee-b18b-4b7c-869f-7d601cea30b6@alliedtelesis.co.nz/
>
> Chris Packham (3):
> auxdisplay: Add 7 segment LED display driver
> dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
> ARM: dts: marvell: Add 7 segment LED display on x530
>
> .../auxdisplay/generic,gpio-7seg.yaml | 40 +++++
> .../boot/dts/marvell/armada-385-atl-x530.dts | 13 +-
> drivers/auxdisplay/Kconfig | 7 +
> drivers/auxdisplay/Makefile | 1 +
> drivers/auxdisplay/seg-led.c | 152 ++++++++++++++++++
> 5 files changed, 212 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/auxdisplay/generic,gpio-7seg.yaml
> create mode 100644 drivers/auxdisplay/seg-led.c
>
> --
> 2.43.2
>
>
>
My bot found new DT warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y marvell/armada-385-atl-x530.dtb' for 20240225213423.690561-1-chris.packham@alliedtelesis.co.nz:
arch/arm/boot/dts/marvell/armada-385-atl-x530.dtb: soc: internal-regs: {'compatible': ['simple-bus'], '#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, 4026597376, 0, 1048576]], 'sdramc@1400': {'compatible': ['marvell,armada-xp-sdram-controller'], 'reg': [[5120, 1280]]}, 'cache-controller@8000': {'compatible': ['arm,pl310-cache'], 'reg': [[32768, 4096]], 'cache-unified': True, 'cache-level': [[2]], 'arm,double-linefill-incr': [[0]], 'arm,double-linefill-wrap': [[0]], 'arm,double-linefill': [[0]], 'prefetch-data': [[1]]}, 'scu@c000': {'compatible': ['arm,cortex-a9-scu'], 'reg': [[49152, 88]]}, 'timer@c200': {'compatible': ['arm,cortex-a9-global-timer'], 'reg': [[49664, 32]], 'interrupts': [[1, 11, 769]], 'clocks': [[4, 2]]}, 'timer@c600': {'compatible': ['arm,cortex-a9-twd-timer'], 'reg': [[50688, 32]], 'interrupts': [[1, 13, 769]], 'clocks': [[4, 2]]}, 'interrupt-controller@d000': {'compatible': ['arm,cortex-a9-gic'], '#interrupt-cells': [[3]], '#size-cells': [[0]], 'interrupt-controller': True, 'reg': [[53248, 4096], [49408, 256]], 'phandle': [[3]]}, 'i2c@11000': {'compatible': ['marvell,mv78230-a0-i2c', 'marvell,mv64xxx-i2c'], 'reg': [[69632, 32]], '#address-cells': [[1]], '#size-cells': [[0]], 'interrupts': [[0, 2, 4]], 'clocks': [[4, 0]], 'status': ['okay'], 'pinctrl-names': ['default', 'gpio'], 'pinctrl-0': [[5]], 'clock-frequency': [[100000]], 'pinctrl-1': [[6]], 'scl-gpio': [[7, 2, 6]], 'sda-gpio': [[7, 3, 6]], 'mux@71': {'#address-cells': [[1]], '#size-cells': [[0]], 'compatible': ['nxp,pca9544'], 'reg': [[113]], 'i2c-mux-idle-disconnect': True, 'i2c@0': {'#address-cells': [[1]], '#size-cells': [[0]], 'reg': [[0]]}, 'i2c@1': {'#address-cells': [[1]], '#size-cells': [[0]], 'reg': [[1]], 'hwmon@2e': {'compatible': ['adi,adt7476'], 'reg': [[46]]}, 'hwmon@2d': {'compatible': ['adi,adt7476'], 'reg': [[45]]}}, 'i2c@2': {'#address-cells': [[1]], '#size-cells': [[0]], 'reg': [[2]], 'rtc@68': {'compatible': ['dallas,ds1340'], 'reg': [[104]]}}, 'i2c@3': {'#address-cells': [[1]], '#size-cells': [[0]], 'reg': [[3]], 'gpio@20': {'compatible': ['nxp,pca9554'], 'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[32]], 'phandle': [[23]]}}}}, 'i2c@11100': {'compatible': ['marvell,mv78230-a0-i2c', 'marvell,mv64xxx-i2c'], 'reg': [[69888, 32]], '#address-cells': [[1]], '#size-cells': [[0]], 'interrupts': [[0, 3, 4]], 'clocks': [[4, 0]], 'status': ['disabled']}, 'serial@12000': {'compatible': ['marvell,armada-38x-uart', 'ns16550a'], 'reg': [[73728, 256]], 'reg-shift': [[2]], 'interrupts': [[0, 12, 4]], 'reg-io-width': [[1]], 'clocks': [[4, 0]], 'status': ['okay'], 'pinctrl-names': ['default'], 'pinctrl-0': [[8]]}, 'serial@12100': {'compatible': ['marvell,armada-38x-uart', 'ns16550a'], 'reg': [[73984, 256]], 'reg-shift': [[2]], 'interrupts': [[0, 13, 4]], 'reg-io-width': [[1]], 'clocks': [[4, 0]], 'status': ['disabled']}, 'pinctrl@18000': {'reg': [[98304, 32]], 'compatible': ['marvell,mv88f6820-pinctrl'], 'phandle': [[9]], 'ge-rgmii-pins-0': {'marvell,pins': ['mpp6', 'mpp7', 'mpp8', 'mpp9', 'mpp10', 'mpp11', 'mpp12', 'mpp13', 'mpp14', 'mpp15', 'mpp16', 'mpp17'], 'marvell,function': ['ge0']}, 'ge-rgmii-pins-1': {'marvell,pins': ['mpp21', 'mpp27', 'mpp28', 'mpp29', 'mpp30', 'mpp31', 'mpp32', 'mpp37', 'mpp38', 'mpp39', 'mpp40', 'mpp41'], 'marvell,function': ['ge1']}, 'i2c-pins-0': {'marvell,pins': ['mpp2', 'mpp3'], 'marvell,function': ['i2c0'], 'phandle': [[5]]}, 'mdio-pins': {'marvell,pins': ['mpp4', 'mpp5'], 'marvell,function': ['ge']}, 'ref-clk-pins-0': {'marvell,pins': ['mpp45'], 'marvell,function': ['ref']}, 'ref-clk-pins-1': {'marvell,pins': ['mpp46'], 'marvell,function': ['ref']}, 'spi-pins-0': {'marvell,pins': ['mpp22', 'mpp23', 'mpp24', 'mpp25'], 'marvell,function': ['spi0']}, 'spi-pins-1': {'marvell,pins': ['mpp56', 'mpp57', 'mpp58', 'mpp59'], 'marvell,function': ['spi1'], 'phandle': [[17]]}, 'nand-pins': {'marvell,pins': ['mpp22', 'mpp34', 'mpp23', 'mpp33', 'mpp38', 'mpp28', 'mpp40', 'mpp42', 'mpp35', 'mpp36', 'mpp25', 'mpp30', 'mpp32'], 'marvell,function': ['dev']}, 'nand-rb': {'marvell,pins': ['mpp41'], 'marvell,function': ['nand']}, 'uart-pins-0': {'marvell,pins': ['mpp0', 'mpp1'], 'marvell,function': ['ua0'], 'phandle': [[8]]}, 'uart-pins-1': {'marvell,pins': ['mpp19', 'mpp20'], 'marvell,function': ['ua1']}, 'sdhci-pins': {'marvell,pins': ['mpp48', 'mpp49', 'mpp50', 'mpp52', 'mpp53', 'mpp54', 'mpp55', 'mpp57', 'mpp58', 'mpp59'], 'marvell,function': ['sd0']}, 'sata-pins-0': {'marvell,pins': ['mpp20'], 'marvell,function': ['sata0']}, 'sata-pins-1': {'marvell,pins': ['mpp19'], 'marvell,function': ['sata1']}, 'sata-pins-2': {'marvell,pins': ['mpp47'], 'marvell,function': ['sata2']}, 'sata-pins-3': {'marvell,pins': ['mpp44'], 'marvell,function': ['sata3']}, 'i2s-pins': {'marvell,pins': ['mpp48', 'mpp49', 'mpp50', 'mpp51', 'mpp52', 'mpp53'], 'marvell,function': ['audio']}, 'spdif-pins': {'marvell,pins': ['mpp51'], 'marvell,function': ['audio']}, 'i2c-gpio-pins-0': {'marvell,pins': ['mpp2', 'mpp3'], 'marvell,function': ['gpio'], 'phandle': [[6]]}}, 'gpio@18100': {'compatible': ['marvell,armada-370-gpio', 'marvell,orion-gpio'], 'reg': [[98560, 64], [98752, 8]], 'reg-names': ['gpio', 'pwm'], 'ngpios': [[32]], 'gpio-controller': True, 'gpio-ranges': [[9, 0, 0, 32]], '#gpio-cells': [[2]], '#pwm-cells': [[2]], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'interrupts': [[0, 53, 4], [0, 54, 4], [0, 55, 4], [0, 56, 4]], 'clocks': [[4, 0]], 'phandle': [[7]]}, 'gpio@18140': {'compatible': ['marvell,armada-370-gpio', 'marvell,orion-gpio'], 'reg': [[98624, 64], [98760, 8]], 'reg-names': ['gpio', 'pwm'], 'ngpios': [[28]], 'gpio-controller': True, 'gpio-ranges': [[9, 0, 32, 28]], '#gpio-cells': [[2]], '#pwm-cells': [[2]], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'interrupts': [[0, 58, 4], [0, 59, 4], [0, 60, 4], [0, 61, 4]], 'clocks': [[4, 0]], 'phandle': [[19]]}, 'system-controller@18200': {'compatible': ['marvell,armada-380-system-controller', 'marvell,armada-370-xp-system-controller'], 'reg': [[98816, 256]]}, 'clock-gating-control@18220': {'compatible': ['marvell,armada-380-gating-clock'], 'reg': [[98848, 4]], 'clocks': [[4, 0]], '#clock-cells': [[1]], 'phandle': [[11]]}, 'phy@18300': {'compatible': ['marvell,armada-380-comphy'], 'reg-names': ['comphy', 'conf'], 'reg': [[99072, 256], [99424, 4]], '#address-cells': [[1]], '#size-cells': [[0]], 'phy@0': {'reg': [[0]], '#phy-cells': [[1]]}, 'phy@1': {'reg': [[1]], '#phy-cells': [[1]]}, 'phy@2': {'reg': [[2]], '#phy-cells': [[1]]}, 'phy@3': {'reg': [[3]], '#phy-cells': [[1]]}, 'phy@4': {'reg': [[4]], '#phy-cells': [[1]]}, 'phy@5': {'reg': [[5]], '#phy-cells': [[1]]}}, 'mvebu-sar@18600': {'compatible': ['marvell,armada-380-core-clock'], 'reg': [[99840, 4]], '#clock-cells': [[1]], 'phandle': [[4]]}, 'mbus-controller@20000': {'compatible': ['marvell,mbus-controller'], 'reg': [[131072, 256], [131456, 32], [131664, 8]], 'phandle': [[2]]}, 'interrupt-controller@20a00': {'compatible': ['marvell,mpic'], 'reg': [[133632, 720], [135280, 88]], '#interrupt-cells': [[1]], '#size-cells': [[1]], 'interrupt-controller': True, 'msi-controller': True, 'interrupts': [[1, 15, 4]], 'phandle': [[1]]}, 'timer@20300': {'compatible': ['marvell,armada-380-timer', 'marvell,armada-xp-timer'], 'reg': [[131840, 48], [135232, 48]], 'interrupts-extended': [[3, 0, 8, 4], [3, 0, 9, 4], [3, 0, 10, 4], [3, 0, 11, 4], [1, 5], [1, 6]], 'clocks': [[4, 2], [10]], 'clock-names': ['nbclk', 'fixed']}, 'watchdog@20300': {'compatible': ['marvell,armada-380-wdt'], 'reg': [[131840, 52], [132868, 4], [98912, 4]], 'clocks': [[4, 2], [10]], 'clock-names': ['nbclk', 'fixed'], 'interrupts-extended': [[3, 0, 64, 4], [3, 0, 9, 4]]}, 'cpurst@20800': {'compatible': ['marvell,armada-370-cpu-reset'], 'reg': [[133120, 16]]}, 'mpcore-soc-ctrl@20d20': {'compatible': ['marvell,armada-380-mpcore-soc-ctrl'], 'reg': [[134432, 108]]}, 'coherency-fabric@21010': {'compatible': ['marvell,armada-380-coherency-fabric'], 'reg': [[135184, 28]]}, 'pmsu@22000': {'compatible': ['marvell,armada-380-pmsu'], 'reg': [[139264, 4096]]}, 'ethernet@70000': {'compatible': ['marvell,armada-370-neta'], 'reg': [[458752, 16384]], 'interrupts-extended': [[1, 8]], 'clocks': [[11, 4]], 'tx-csum-limit': [[9800]], 'status': ['disabled']}, 'ethernet@30000': {'compatible': ['marvell,armada-370-neta'], 'reg': [[196608, 16384]], 'interrupts-extended': [[1, 10]], 'clocks': [[11, 3]], 'status': ['disabled']}, 'ethernet@34000': {'compatible': ['marvell,armada-370-neta'], 'reg': [[212992, 16384]], 'interrupts-extended': [[1, 12]], 'clocks': [[11, 2]], 'status': ['disabled']}, 'usb@58000': {'compatible': ['marvell,orion-ehci'], 'reg': [[360448, 1280]], 'interrupts': [[0, 18, 4]], 'clocks': [[11, 18]], 'status': ['okay']}, 'xor@60800': {'compatible': ['marvell,armada-380-xor', 'marvell,orion-xor'], 'reg': [[395264, 256], [395776, 256]], 'clocks': [[11, 22]], 'status': ['okay'], 'xor00': {'interrupts': [[0, 22, 4]], 'dmacap,memcpy': True, 'dmacap,xor': True}, 'xor01': {'interrupts': [[0, 23, 4]], 'dmacap,memcpy': True, 'dmacap,xor': True, 'dmacap,memset': True}}, 'xor@60900': {'compatible': ['marvell,armada-380-xor', 'marvell,orion-xor'], 'reg': [[395520, 256], [396032, 256]], 'clocks': [[11, 28]], 'status': ['okay'], 'xor10': {'interrupts': [[0, 65, 4]], 'dmacap,memcpy': True, 'dmacap,xor': True}, 'xor11': {'interrupts': [[0, 66, 4]], 'dmacap,memcpy': True, 'dmacap,xor': True, 'dmacap,memset': True}}, 'mdio@72004': {'#address-cells': [[1]], '#size-cells': [[0]], 'compatible': ['marvell,orion-mdio'], 'reg': [[466948, 4]], 'clocks': [[11, 4]]}, 'crypto@90000': {'compatible': ['marvell,armada-38x-crypto'], 'reg': [[589824, 65536]], 'reg-names': ['regs'], 'interrupts': [[0, 19, 4], [0, 20, 4]], 'clocks': [[11, 23], [11, 21], [11, 14], [11, 16]], 'clock-names': ['cesa0', 'cesa1', 'cesaz0', 'cesaz1'], 'marvell,crypto-srams': [[12, 13]], 'marvell,crypto-sram-size': [[2048]]}, 'rtc@a3800': {'compatible': ['marvell,armada-380-rtc'], 'reg': [[669696, 32], [99488, 12]], 'reg-names': ['rtc', 'rtc-soc'], 'interrupts': [[0, 21, 4]]}, 'sata@a8000': {'compatible': ['marvell,armada-380-ahci'], 'reg': [[688128, 8192]], 'interrupts': [[0, 26, 4]], 'clocks': [[11, 15]], 'status': ['disabled']}, 'bm@c8000': {'compatible': ['marvell,armada-380-neta-bm'], 'reg': [[819200, 172]], 'clocks': [[11, 13]], 'internal-mem': [[14]], 'status': ['disabled']}, 'sata@e0000': {'compatible': ['marvell,armada-380-ahci'], 'reg': [[917504, 8192]], 'interrupts': [[0, 28, 4]], 'clocks': [[11, 30]], 'status': ['disabled']}, 'clock@e4250': {'compatible': ['marvell,armada-380-corediv-clock'], 'reg': [[934480, 12]], '#clock-cells': [[1]], 'clocks': [[15]], 'clock-output-names': ['nand'], 'phandle': [[16]]}, 'thermal@e8078': {'compatible': ['marvell,armada380-thermal'], 'reg': [[934008, 4], [934000, 8]], 'status': ['okay']}, 'nand-controller@d0000': {'compatible': ['marvell,armada370-nand-controller'], 'reg': [[851968, 84]], '#address-cells': [[1]], '#size-cells': [[0]], 'interrupts': [[0, 84, 4]], 'clocks': [[16, 0]], 'status': ['okay'], 'nand@0': {'reg': [[0]], 'label': ['pxa3xx_nand-0'], 'nand-rb': [[0]], 'nand-on-flash-bbt': True, 'nand-ecc-strength': [[4]], 'nand-ecc-step-size': [[512]], 'marvell,nand-enable-arbiter': True, 'partitions': {'compatible': ['fixed-partitions'], '#address-cells': [[1]], '#size-cells': [[1]], 'partition@0': {'reg': [[0, 251658240]], 'label': ['user']}, 'partition@f000000': {'reg': [[251658240, 8388608]], 'label': ['errlog']}, 'partition@f800000': {'reg': [[260046848, 8388608]], 'label': ['nand-bbt']}}}}, 'sdhci@d8000': {'compatible': ['marvell,armada-380-sdhci'], 'reg-names': ['sdhci', 'mbus', 'conf-sdio3'], 'reg': [[884736, 4096], [901120, 256], [99412, 4]], 'interrupts': [[0, 25, 4]], 'clocks': [[11, 17]], 'mrvl,clk-delay-cycles': [[31]], 'status': ['disabled']}, 'audio-controller@e8000': {'#sound-dai-cells': [[1]], 'compatible': ['marvell,armada-380-audio'], 'reg': [[950272, 16384], [99344, 12], [98820, 4]], 'reg-names': ['i2s_regs', 'pll_regs', 'soc_ctrl'], 'interrupts': [[0, 75, 4]], 'clocks': [[11, 0]], 'clock-names': ['internal'], 'status': ['disabled']}, 'usb3@f0000': {'compatible': ['marvell,armada-380-xhci'], 'reg': [[983040, 16384], [999424, 16384]], 'interrupts': [[0, 16, 4]], 'clocks': [[11, 9]], 'status': ['disabled']}, 'usb3@f8000': {'compatible': ['marvell,armada-380-xhci'], 'reg': [[1015808, 16384], [1032192, 16384]], 'interrupts': [[0, 17, 4]], 'clocks': [[11, 10]], 'status': ['disabled']}} should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
prev parent reply other threads:[~2024-02-26 16:54 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-25 21:34 Chris Packham
2024-02-25 21:34 ` [PATCH 1/3] auxdisplay: Add 7 segment LED display driver Chris Packham
2024-02-26 2:32 ` Andy Shevchenko
2024-02-26 2:49 ` Randy Dunlap
2024-02-25 21:34 ` [PATCH 2/3] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED Chris Packham
2024-02-25 21:34 ` [PATCH 3/3] ARM: dts: marvell: Add 7 segment LED display on x530 Chris Packham
2024-02-26 2:23 ` [PATCH 0/3] auxdisplay: 7 segment LED display Andy Shevchenko
2024-02-26 16:40 ` Andy Shevchenko
2024-02-27 0:52 ` Chris Packham
2024-02-27 0:58 ` Andy Shevchenko
2024-02-26 16:04 ` Alexander Dahl
2024-02-26 20:10 ` Chris Packham
2024-02-27 8:43 ` Alexander Dahl
2024-02-27 13:00 ` Andy Shevchenko
2024-02-27 13:04 ` Pavel Machek
2024-02-26 16:54 ` Rob Herring [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=170896502255.859020.4639120006267962858.robh@kernel.org \
--to=robh@kernel.org \
--cc=andrew@lunn.ch \
--cc=andy.shevchenko@gmail.com \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert@linux-m68k.org \
--cc=gregory.clement@bootlin.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=ojeda@kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®