mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chris Packham <chris.packham@alliedtelesis.co.nz>
To: ojeda@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	andrew@lunn.ch, gregory.clement@bootlin.com,
	sebastian.hesselbarth@gmail.com, andy.shevchenko@gmail.com,
	geert@linux-m68k.org, pavel@ucw.cz, lee@kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-leds@vger.kernel.org,
	Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: [PATCH 1/3] auxdisplay: Add 7 segment LED display driver
Date: Mon, 26 Feb 2024 10:34:21 +1300	[thread overview]
Message-ID: <20240225213423.690561-2-chris.packham@alliedtelesis.co.nz> (raw)
In-Reply-To: <20240225213423.690561-1-chris.packham@alliedtelesis.co.nz>

Add a driver for a 7 segment LED display. At the moment only one
character is supported but it should be possible to expand this to
support more characters and/or 14 segment displays in the future.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/auxdisplay/Kconfig   |   7 ++
 drivers/auxdisplay/Makefile  |   1 +
 drivers/auxdisplay/seg-led.c | 152 +++++++++++++++++++++++++++++++++++
 3 files changed, 160 insertions(+)
 create mode 100644 drivers/auxdisplay/seg-led.c

diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index d944d5298eca..e826b5b15881 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -197,6 +197,13 @@ config ARM_CHARLCD
 	  line and the Linux version on the second line, but that's
 	  still useful.
 
+config SEG_LED
+	bool "Generic 7 segment LED display"
+	select LINEDISP
+	help
+	  This driver supports a generic 7 segment LED display made up
+	  of GPIO pins connected to the individual segments.
+
 menuconfig PARPORT_PANEL
 	tristate "Parallel port LCD/Keypad Panel support"
 	depends on PARPORT
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 6968ed4d3f0a..808fdf156bd5 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_HT16K33)		+= ht16k33.o
 obj-$(CONFIG_PARPORT_PANEL)	+= panel.o
 obj-$(CONFIG_LCD2S)		+= lcd2s.o
 obj-$(CONFIG_LINEDISP)		+= line-display.o
+obj-$(CONFIG_SEG_LED)		+= seg-led.o
diff --git a/drivers/auxdisplay/seg-led.c b/drivers/auxdisplay/seg-led.c
new file mode 100644
index 000000000000..c0b302a09cbb
--- /dev/null
+++ b/drivers/auxdisplay/seg-led.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for a 7 segment LED display
+ *
+ * The GPIOs are wired to the 7 segments in a clock wise fashion starting from
+ * the top.
+ *
+ *      -a-
+ *     |   |
+ *     f   b
+ *     |   |
+ *      -g-
+ *     |   |
+ *     e   c
+ *     |   |
+ *      -d-
+ *
+ * The decimal point LED presnet on some devices is currently not
+ * supported.
+ *
+ * Copyright (C) Allied Telesis Labs
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/map_to_7segment.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "line-display.h"
+
+struct seg_led_priv {
+	struct gpio_descs *segment_gpios;
+	struct delayed_work work;
+	struct linedisp linedisp;
+	struct seg7_conversion_map seg7;
+	unsigned int map_size;
+	size_t num_char;
+	char curr[];
+};
+
+static const SEG7_DEFAULT_MAP(initial_map_seg7);
+
+static ssize_t map_seg7_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct seg_led_priv *priv = dev_get_drvdata(dev);
+
+	memcpy(buf, &priv->seg7, priv->map_size);
+	return priv->map_size;
+}
+
+static ssize_t map_seg7_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t cnt)
+{
+	struct seg_led_priv *priv = dev_get_drvdata(dev);
+
+	if (cnt != priv->map_size)
+		return -EINVAL;
+
+	memcpy(&priv->seg7, buf, cnt);
+	return cnt;
+}
+
+static DEVICE_ATTR_RW(map_seg7);
+
+static void seg_led_linedisp_update(struct linedisp *linedisp)
+{
+	struct seg_led_priv *priv = container_of(linedisp, struct seg_led_priv, linedisp);
+
+	schedule_delayed_work(&priv->work, 0);
+}
+
+static void seg_led_update(struct work_struct *work)
+{
+	struct seg_led_priv *priv = container_of(work, struct seg_led_priv, work.work);
+	DECLARE_BITMAP(values, 8);
+
+	values[0] = map_to_seg7(&priv->seg7, priv->curr[0]);
+
+	gpiod_set_array_value_cansleep(priv->segment_gpios->ndescs, priv->segment_gpios->desc,
+				       priv->segment_gpios->info, values);
+}
+
+static const struct of_device_id seg_led_of_match[] = {
+	{ .compatible = "generic,gpio-7seg"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, seg_led_of_match);
+
+static int seg_led_probe(struct platform_device *pdev)
+{
+	struct seg_led_priv *priv;
+	int err;
+
+	priv = devm_kzalloc(&pdev->dev, struct_size(priv, curr, 1), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->num_char = 1;
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->segment_gpios = devm_gpiod_get_array(&pdev->dev, "segment", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->segment_gpios))
+		return PTR_ERR(priv->segment_gpios);
+
+	priv->seg7 = initial_map_seg7;
+	priv->map_size = sizeof(priv->seg7);
+
+	err = device_create_file(&pdev->dev, &dev_attr_map_seg7);
+	if (err)
+		return err;
+
+	INIT_DELAYED_WORK(&priv->work, seg_led_update);
+
+	err = linedisp_register(&priv->linedisp, &pdev->dev, 1, priv->curr,
+				seg_led_linedisp_update);
+	if (err) {
+		device_remove_file(&pdev->dev, &dev_attr_map_seg7);
+		return err;
+	}
+
+	return 0;
+}
+
+static int seg_led_remove(struct platform_device *pdev)
+{
+	struct seg_led_priv *priv = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&priv->work);
+	linedisp_unregister(&priv->linedisp);
+	device_remove_file(&pdev->dev, &dev_attr_map_seg7);
+
+	return 0;
+}
+
+static struct platform_driver seg_led_driver = {
+	.probe = seg_led_probe,
+	.remove = seg_led_remove,
+	.driver = {
+		.name = "seg-led",
+		.of_match_table = seg_led_of_match,
+	},
+};
+
+module_platform_driver(seg_led_driver);
+
+MODULE_AUTHOR("Chris Packham <chris.packham@alliedtelesis.co.nz>");
+MODULE_DESCRIPTION("7 segment LED driver");
+MODULE_LICENSE("GPL");
+
-- 
2.43.2


  reply	other threads:[~2024-02-25 21:34 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-25 21:34 [PATCH 0/3] auxdisplay: 7 segment LED display Chris Packham
2024-02-25 21:34 ` Chris Packham [this message]
2024-02-26  2:32   ` [PATCH 1/3] auxdisplay: Add 7 segment LED display driver Andy Shevchenko
2024-02-26  2:49   ` Randy Dunlap
2024-02-25 21:34 ` [PATCH 2/3] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED Chris Packham
2024-02-25 21:34 ` [PATCH 3/3] ARM: dts: marvell: Add 7 segment LED display on x530 Chris Packham
2024-02-26  2:23 ` [PATCH 0/3] auxdisplay: 7 segment LED display Andy Shevchenko
2024-02-26 16:40   ` Andy Shevchenko
2024-02-27  0:52   ` Chris Packham
2024-02-27  0:58     ` Andy Shevchenko
2024-02-26 16:04 ` Alexander Dahl
2024-02-26 20:10   ` Chris Packham
2024-02-27  8:43     ` Alexander Dahl
2024-02-27 13:00       ` Andy Shevchenko
2024-02-27 13:04       ` Pavel Machek
2024-02-26 16:54 ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240225213423.690561-2-chris.packham@alliedtelesis.co.nz \
    --to=chris.packham@alliedtelesis.co.nz \
    --cc=andrew@lunn.ch \
    --cc=andy.shevchenko@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert@linux-m68k.org \
    --cc=gregory.clement@bootlin.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=ojeda@kernel.org \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®