Re: [PATCH v3 1/3] dt-bindings: iio: pressure: Add Sensirion SDP500

["Rob Herring (Arm)" <robh@kernel.org>]

On Tue, 02 Jul 2024 16:59:08 +0200, Petar Stoykov wrote:
> Sensirion SDP500 is a digital differential pressure sensor. It provides
> a digital I2C output. Add devicetree bindings requiring the compatible
> string and I2C slave address (reg).
> 
> Signed-off-by: Petar Stoykov <pd.pstoykov@gmail.com>
> ---
>  .../bindings/iio/pressure/sensirion,sdp500.yaml    | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
 	 $id: http://devicetree.org/schemas/iio/pressure/sdp500.yaml
 	file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.example.dtb: pressure@40: 'vdd-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/iio/pressure/sdp500.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240702-mainline_sdp500-v3-1-0902047b3eee@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.