[PATCH v4 0/4] locking/lockdep: Disable KASAN instrumentation of lockdep.c

[PATCH v4 0/4] locking/lockdep: Disable KASAN instrumentation of lockdep.c

[Waiman Long]

 v3: 
  - Add another patch to insert lock events into lockdep.c.
  - Rerun all the tests with the simpler defconfig kernel build and do
    further analysis of the of the performance difference between the
    the RT and non-RT debug kernels.

 v4:
  - Update test results in patch 3 after incorporating CONFIG_KASAN_INLINE
    into the test matrix.
  - Add patch 4 to call kasan_check_byte() in lock_acquire.

It is found that disabling KASAN instrumentation when compiling
lockdep.c can significantly improve the performance of RT debug kernel
while the performance benefit of non-RT debug kernel is relatively
modest.

This series also include patches to add locking events to the rtmutex
slow paths and the lockdep code for better analysis of the different
performance behavior between RT and non-RT debug kernels.

Waiman Long (4):
  locking/lock_events: Add locking events for rtmutex slow paths
  locking/lock_events: Add locking events for lockdep
  locking/lockdep: Disable KASAN instrumentation of lockdep.c
  locking/lockdep: Add kasan_check_byte() check in lock_acquire()

 kernel/locking/Makefile           |  3 ++-
 kernel/locking/lock_events_list.h | 29 +++++++++++++++++++++++++++++
 kernel/locking/lockdep.c          | 22 +++++++++++++++++++++-
 kernel/locking/rtmutex.c          | 29 ++++++++++++++++++++++++-----
 4 files changed, 76 insertions(+), 7 deletions(-)

-- 
2.48.1

[PATCH v4 1/4] locking/lock_events: Add locking events for rtmutex slow paths

[Waiman Long]

Add locking events for rtlock_slowlock() and rt_mutex_slowlock() for
profiling the slow path behavior of rt_spin_lock() and rt_mutex_lock().

Signed-off-by: Waiman Long <longman@redhat.com>
---
 kernel/locking/lock_events_list.h | 21 +++++++++++++++++++++
 kernel/locking/rtmutex.c          | 29 ++++++++++++++++++++++++-----
 2 files changed, 45 insertions(+), 5 deletions(-)

diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
index 97fb6f3f840a..80b11f194c9f 100644
--- a/kernel/locking/lock_events_list.h
+++ b/kernel/locking/lock_events_list.h
@@ -67,3 +67,24 @@ LOCK_EVENT(rwsem_rlock_handoff)	/* # of read lock handoffs		*/
 LOCK_EVENT(rwsem_wlock)		/* # of write locks acquired		*/
 LOCK_EVENT(rwsem_wlock_fail)	/* # of failed write lock acquisitions	*/
 LOCK_EVENT(rwsem_wlock_handoff)	/* # of write lock handoffs		*/
+
+/*
+ * Locking events for rtlock_slowlock()
+ */
+LOCK_EVENT(rtlock_slowlock)	/* # of rtlock_slowlock() calls		*/
+LOCK_EVENT(rtlock_slow_acq1)	/* # of locks acquired after wait_lock	*/
+LOCK_EVENT(rtlock_slow_acq2)	/* # of locks acquired in for loop	*/
+LOCK_EVENT(rtlock_slow_sleep)	/* # of sleeps				*/
+LOCK_EVENT(rtlock_slow_wake)	/* # of wakeup's			*/
+
+/*
+ * Locking events for rt_mutex_slowlock()
+ */
+LOCK_EVENT(rtmutex_slowlock)	/* # of rt_mutex_slowlock() calls	*/
+LOCK_EVENT(rtmutex_slow_block)	/* # of rt_mutex_slowlock_block() calls	*/
+LOCK_EVENT(rtmutex_slow_acq1)	/* # of locks acquired after wait_lock	*/
+LOCK_EVENT(rtmutex_slow_acq2)	/* # of locks acquired at the end	*/
+LOCK_EVENT(rtmutex_slow_acq3)	/* # of locks acquired in *block()	*/
+LOCK_EVENT(rtmutex_slow_sleep)	/* # of sleeps				*/
+LOCK_EVENT(rtmutex_slow_wake)	/* # of wakeup's			*/
+LOCK_EVENT(rtmutex_deadlock)	/* # of rt_mutex_handle_deadlock()'s	*/
diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c
index 4a8df1800cbb..c80902eacd79 100644
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -27,6 +27,7 @@
 #include <trace/events/lock.h>
 
 #include "rtmutex_common.h"
+#include "lock_events.h"
 
 #ifndef WW_RT
 # define build_ww_mutex()	(false)
@@ -1612,10 +1613,13 @@ static int __sched rt_mutex_slowlock_block(struct rt_mutex_base *lock,
 	struct task_struct *owner;
 	int ret = 0;
 
+	lockevent_inc(rtmutex_slow_block);
 	for (;;) {
 		/* Try to acquire the lock: */
-		if (try_to_take_rt_mutex(lock, current, waiter))
+		if (try_to_take_rt_mutex(lock, current, waiter)) {
+			lockevent_inc(rtmutex_slow_acq3);
 			break;
+		}
 
 		if (timeout && !timeout->task) {
 			ret = -ETIMEDOUT;
@@ -1638,8 +1642,10 @@ static int __sched rt_mutex_slowlock_block(struct rt_mutex_base *lock,
 			owner = NULL;
 		raw_spin_unlock_irq_wake(&lock->wait_lock, wake_q);
 
-		if (!owner || !rtmutex_spin_on_owner(lock, waiter, owner))
+		if (!owner || !rtmutex_spin_on_owner(lock, waiter, owner)) {
+			lockevent_inc(rtmutex_slow_sleep);
 			rt_mutex_schedule();
+		}
 
 		raw_spin_lock_irq(&lock->wait_lock);
 		set_current_state(state);
@@ -1694,6 +1700,7 @@ static int __sched __rt_mutex_slowlock(struct rt_mutex_base *lock,
 	int ret;
 
 	lockdep_assert_held(&lock->wait_lock);
+	lockevent_inc(rtmutex_slowlock);
 
 	/* Try to acquire the lock again: */
 	if (try_to_take_rt_mutex(lock, current, NULL)) {
@@ -1701,6 +1708,7 @@ static int __sched __rt_mutex_slowlock(struct rt_mutex_base *lock,
 			__ww_mutex_check_waiters(rtm, ww_ctx, wake_q);
 			ww_mutex_lock_acquired(ww, ww_ctx);
 		}
+		lockevent_inc(rtmutex_slow_acq1);
 		return 0;
 	}
 
@@ -1719,10 +1727,12 @@ static int __sched __rt_mutex_slowlock(struct rt_mutex_base *lock,
 				__ww_mutex_check_waiters(rtm, ww_ctx, wake_q);
 			ww_mutex_lock_acquired(ww, ww_ctx);
 		}
+		lockevent_inc(rtmutex_slow_acq2);
 	} else {
 		__set_current_state(TASK_RUNNING);
 		remove_waiter(lock, waiter);
 		rt_mutex_handle_deadlock(ret, chwalk, lock, waiter);
+		lockevent_inc(rtmutex_deadlock);
 	}
 
 	/*
@@ -1751,6 +1761,7 @@ static inline int __rt_mutex_slowlock_locked(struct rt_mutex_base *lock,
 				  &waiter, wake_q);
 
 	debug_rt_mutex_free_waiter(&waiter);
+	lockevent_cond_inc(rtmutex_slow_wake, !wake_q_empty(wake_q));
 	return ret;
 }
 
@@ -1823,9 +1834,12 @@ static void __sched rtlock_slowlock_locked(struct rt_mutex_base *lock,
 	struct task_struct *owner;
 
 	lockdep_assert_held(&lock->wait_lock);
+	lockevent_inc(rtlock_slowlock);
 
-	if (try_to_take_rt_mutex(lock, current, NULL))
+	if (try_to_take_rt_mutex(lock, current, NULL)) {
+		lockevent_inc(rtlock_slow_acq1);
 		return;
+	}
 
 	rt_mutex_init_rtlock_waiter(&waiter);
 
@@ -1838,8 +1852,10 @@ static void __sched rtlock_slowlock_locked(struct rt_mutex_base *lock,
 
 	for (;;) {
 		/* Try to acquire the lock again */
-		if (try_to_take_rt_mutex(lock, current, &waiter))
+		if (try_to_take_rt_mutex(lock, current, &waiter)) {
+			lockevent_inc(rtlock_slow_acq2);
 			break;
+		}
 
 		if (&waiter == rt_mutex_top_waiter(lock))
 			owner = rt_mutex_owner(lock);
@@ -1847,8 +1863,10 @@ static void __sched rtlock_slowlock_locked(struct rt_mutex_base *lock,
 			owner = NULL;
 		raw_spin_unlock_irq_wake(&lock->wait_lock, wake_q);
 
-		if (!owner || !rtmutex_spin_on_owner(lock, &waiter, owner))
+		if (!owner || !rtmutex_spin_on_owner(lock, &waiter, owner)) {
+			lockevent_inc(rtlock_slow_sleep);
 			schedule_rtlock();
+		}
 
 		raw_spin_lock_irq(&lock->wait_lock);
 		set_current_state(TASK_RTLOCK_WAIT);
@@ -1865,6 +1883,7 @@ static void __sched rtlock_slowlock_locked(struct rt_mutex_base *lock,
 	debug_rt_mutex_free_waiter(&waiter);
 
 	trace_contention_end(lock, 0);
+	lockevent_cond_inc(rtlock_slow_wake, !wake_q_empty(wake_q));
 }
 
 static __always_inline void __sched rtlock_slowlock(struct rt_mutex_base *lock)
-- 
2.48.1

[tip: locking/core] locking/lock_events: Add locking events for rtmutex slow paths

[tip-bot2 for Waiman Long]

The following commit has been merged into the locking/core branch of tip:

Commit-ID:     9b4070d36399ffcadc92c918bd80da036a16faed
Gitweb:        https://git.kernel.org/tip/9b4070d36399ffcadc92c918bd80da036a16faed
Author:        Waiman Long <longman@redhat.com>
AuthorDate:    Thu, 13 Feb 2025 15:02:25 -05:00
Committer:     Boqun Feng <boqun.feng@gmail.com>
CommitterDate: Sun, 23 Feb 2025 18:24:46 -08:00

locking/lock_events: Add locking events for rtmutex slow paths

Add locking events for rtlock_slowlock() and rt_mutex_slowlock() for
profiling the slow path behavior of rt_spin_lock() and rt_mutex_lock().

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250213200228.1993588-2-longman@redhat.com
---
 kernel/locking/lock_events_list.h | 21 +++++++++++++++++++++
 kernel/locking/rtmutex.c          | 29 ++++++++++++++++++++++++-----
 2 files changed, 45 insertions(+), 5 deletions(-)

diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
index 97fb6f3..80b11f1 100644
--- a/kernel/locking/lock_events_list.h
+++ b/kernel/locking/lock_events_list.h
@@ -67,3 +67,24 @@ LOCK_EVENT(rwsem_rlock_handoff)	/* # of read lock handoffs		*/
 LOCK_EVENT(rwsem_wlock)		/* # of write locks acquired		*/
 LOCK_EVENT(rwsem_wlock_fail)	/* # of failed write lock acquisitions	*/
 LOCK_EVENT(rwsem_wlock_handoff)	/* # of write lock handoffs		*/
+
+/*
+ * Locking events for rtlock_slowlock()
+ */
+LOCK_EVENT(rtlock_slowlock)	/* # of rtlock_slowlock() calls		*/
+LOCK_EVENT(rtlock_slow_acq1)	/* # of locks acquired after wait_lock	*/
+LOCK_EVENT(rtlock_slow_acq2)	/* # of locks acquired in for loop	*/
+LOCK_EVENT(rtlock_slow_sleep)	/* # of sleeps				*/
+LOCK_EVENT(rtlock_slow_wake)	/* # of wakeup's			*/
+
+/*
+ * Locking events for rt_mutex_slowlock()
+ */
+LOCK_EVENT(rtmutex_slowlock)	/* # of rt_mutex_slowlock() calls	*/
+LOCK_EVENT(rtmutex_slow_block)	/* # of rt_mutex_slowlock_block() calls	*/
+LOCK_EVENT(rtmutex_slow_acq1)	/* # of locks acquired after wait_lock	*/
+LOCK_EVENT(rtmutex_slow_acq2)	/* # of locks acquired at the end	*/
+LOCK_EVENT(rtmutex_slow_acq3)	/* # of locks acquired in *block()	*/
+LOCK_EVENT(rtmutex_slow_sleep)	/* # of sleeps				*/
+LOCK_EVENT(rtmutex_slow_wake)	/* # of wakeup's			*/
+LOCK_EVENT(rtmutex_deadlock)	/* # of rt_mutex_handle_deadlock()'s	*/
diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c
index 4a8df18..c80902e 100644
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -27,6 +27,7 @@
 #include <trace/events/lock.h>
 
 #include "rtmutex_common.h"
+#include "lock_events.h"
 
 #ifndef WW_RT
 # define build_ww_mutex()	(false)
@@ -1612,10 +1613,13 @@ static int __sched rt_mutex_slowlock_block(struct rt_mutex_base *lock,
 	struct task_struct *owner;
 	int ret = 0;
 
+	lockevent_inc(rtmutex_slow_block);
 	for (;;) {
 		/* Try to acquire the lock: */
-		if (try_to_take_rt_mutex(lock, current, waiter))
+		if (try_to_take_rt_mutex(lock, current, waiter)) {
+			lockevent_inc(rtmutex_slow_acq3);
 			break;
+		}
 
 		if (timeout && !timeout->task) {
 			ret = -ETIMEDOUT;
@@ -1638,8 +1642,10 @@ static int __sched rt_mutex_slowlock_block(struct rt_mutex_base *lock,
 			owner = NULL;
 		raw_spin_unlock_irq_wake(&lock->wait_lock, wake_q);
 
-		if (!owner || !rtmutex_spin_on_owner(lock, waiter, owner))
+		if (!owner || !rtmutex_spin_on_owner(lock, waiter, owner)) {
+			lockevent_inc(rtmutex_slow_sleep);
 			rt_mutex_schedule();
+		}
 
 		raw_spin_lock_irq(&lock->wait_lock);
 		set_current_state(state);
@@ -1694,6 +1700,7 @@ static int __sched __rt_mutex_slowlock(struct rt_mutex_base *lock,
 	int ret;
 
 	lockdep_assert_held(&lock->wait_lock);
+	lockevent_inc(rtmutex_slowlock);
 
 	/* Try to acquire the lock again: */
 	if (try_to_take_rt_mutex(lock, current, NULL)) {
@@ -1701,6 +1708,7 @@ static int __sched __rt_mutex_slowlock(struct rt_mutex_base *lock,
 			__ww_mutex_check_waiters(rtm, ww_ctx, wake_q);
 			ww_mutex_lock_acquired(ww, ww_ctx);
 		}
+		lockevent_inc(rtmutex_slow_acq1);
 		return 0;
 	}
 
@@ -1719,10 +1727,12 @@ static int __sched __rt_mutex_slowlock(struct rt_mutex_base *lock,
 				__ww_mutex_check_waiters(rtm, ww_ctx, wake_q);
 			ww_mutex_lock_acquired(ww, ww_ctx);
 		}
+		lockevent_inc(rtmutex_slow_acq2);
 	} else {
 		__set_current_state(TASK_RUNNING);
 		remove_waiter(lock, waiter);
 		rt_mutex_handle_deadlock(ret, chwalk, lock, waiter);
+		lockevent_inc(rtmutex_deadlock);
 	}
 
 	/*
@@ -1751,6 +1761,7 @@ static inline int __rt_mutex_slowlock_locked(struct rt_mutex_base *lock,
 				  &waiter, wake_q);
 
 	debug_rt_mutex_free_waiter(&waiter);
+	lockevent_cond_inc(rtmutex_slow_wake, !wake_q_empty(wake_q));
 	return ret;
 }
 
@@ -1823,9 +1834,12 @@ static void __sched rtlock_slowlock_locked(struct rt_mutex_base *lock,
 	struct task_struct *owner;
 
 	lockdep_assert_held(&lock->wait_lock);
+	lockevent_inc(rtlock_slowlock);
 
-	if (try_to_take_rt_mutex(lock, current, NULL))
+	if (try_to_take_rt_mutex(lock, current, NULL)) {
+		lockevent_inc(rtlock_slow_acq1);
 		return;
+	}
 
 	rt_mutex_init_rtlock_waiter(&waiter);
 
@@ -1838,8 +1852,10 @@ static void __sched rtlock_slowlock_locked(struct rt_mutex_base *lock,
 
 	for (;;) {
 		/* Try to acquire the lock again */
-		if (try_to_take_rt_mutex(lock, current, &waiter))
+		if (try_to_take_rt_mutex(lock, current, &waiter)) {
+			lockevent_inc(rtlock_slow_acq2);
 			break;
+		}
 
 		if (&waiter == rt_mutex_top_waiter(lock))
 			owner = rt_mutex_owner(lock);
@@ -1847,8 +1863,10 @@ static void __sched rtlock_slowlock_locked(struct rt_mutex_base *lock,
 			owner = NULL;
 		raw_spin_unlock_irq_wake(&lock->wait_lock, wake_q);
 
-		if (!owner || !rtmutex_spin_on_owner(lock, &waiter, owner))
+		if (!owner || !rtmutex_spin_on_owner(lock, &waiter, owner)) {
+			lockevent_inc(rtlock_slow_sleep);
 			schedule_rtlock();
+		}
 
 		raw_spin_lock_irq(&lock->wait_lock);
 		set_current_state(TASK_RTLOCK_WAIT);
@@ -1865,6 +1883,7 @@ static void __sched rtlock_slowlock_locked(struct rt_mutex_base *lock,
 	debug_rt_mutex_free_waiter(&waiter);
 
 	trace_contention_end(lock, 0);
+	lockevent_cond_inc(rtlock_slow_wake, !wake_q_empty(wake_q));
 }
 
 static __always_inline void __sched rtlock_slowlock(struct rt_mutex_base *lock)

[PATCH v4 2/4] locking/lock_events: Add locking events for lockdep

[Waiman Long]

Add some lock events to the lockdep for profiling its behavior.

Signed-off-by: Waiman Long <longman@redhat.com>
---
 kernel/locking/lock_events_list.h | 7 +++++++
 kernel/locking/lockdep.c          | 8 +++++++-
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
index 80b11f194c9f..9ef9850aeebe 100644
--- a/kernel/locking/lock_events_list.h
+++ b/kernel/locking/lock_events_list.h
@@ -88,3 +88,10 @@ LOCK_EVENT(rtmutex_slow_acq3)	/* # of locks acquired in *block()	*/
 LOCK_EVENT(rtmutex_slow_sleep)	/* # of sleeps				*/
 LOCK_EVENT(rtmutex_slow_wake)	/* # of wakeup's			*/
 LOCK_EVENT(rtmutex_deadlock)	/* # of rt_mutex_handle_deadlock()'s	*/
+
+/*
+ * Locking events for lockdep
+ */
+LOCK_EVENT(lockdep_acquire)
+LOCK_EVENT(lockdep_lock)
+LOCK_EVENT(lockdep_nocheck)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 4470680f0226..8436f017c74d 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -61,6 +61,7 @@
 #include <asm/sections.h>
 
 #include "lockdep_internals.h"
+#include "lock_events.h"
 
 #include <trace/events/lock.h>
 
@@ -170,6 +171,7 @@ static struct task_struct *lockdep_selftest_task_struct;
 static int graph_lock(void)
 {
 	lockdep_lock();
+	lockevent_inc(lockdep_lock);
 	/*
 	 * Make sure that if another CPU detected a bug while
 	 * walking the graph we dont change it (while the other
@@ -5091,8 +5093,12 @@ static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 	if (unlikely(lock->key == &__lockdep_no_track__))
 		return 0;
 
-	if (!prove_locking || lock->key == &__lockdep_no_validate__)
+	lockevent_inc(lockdep_acquire);
+
+	if (!prove_locking || lock->key == &__lockdep_no_validate__) {
 		check = 0;
+		lockevent_inc(lockdep_nocheck);
+	}
 
 	if (subclass < NR_LOCKDEP_CACHING_CLASSES)
 		class = lock->class_cache[subclass];
-- 
2.48.1

[tip: locking/core] locking/lock_events: Add locking events for lockdep

[tip-bot2 for Waiman Long]

The following commit has been merged into the locking/core branch of tip:

Commit-ID:     7c17590a20dc9008bf073e86de3be60efdb6dfb4
Gitweb:        https://git.kernel.org/tip/7c17590a20dc9008bf073e86de3be60efdb6dfb4
Author:        Waiman Long <longman@redhat.com>
AuthorDate:    Thu, 13 Feb 2025 15:02:26 -05:00
Committer:     Boqun Feng <boqun.feng@gmail.com>
CommitterDate: Sun, 23 Feb 2025 18:24:46 -08:00

locking/lock_events: Add locking events for lockdep

Add some lock events to the lockdep for profiling its behavior.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250213200228.1993588-3-longman@redhat.com
---
 kernel/locking/lock_events_list.h | 7 +++++++
 kernel/locking/lockdep.c          | 8 +++++++-
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
index 80b11f1..9ef9850 100644
--- a/kernel/locking/lock_events_list.h
+++ b/kernel/locking/lock_events_list.h
@@ -88,3 +88,10 @@ LOCK_EVENT(rtmutex_slow_acq3)	/* # of locks acquired in *block()	*/
 LOCK_EVENT(rtmutex_slow_sleep)	/* # of sleeps				*/
 LOCK_EVENT(rtmutex_slow_wake)	/* # of wakeup's			*/
 LOCK_EVENT(rtmutex_deadlock)	/* # of rt_mutex_handle_deadlock()'s	*/
+
+/*
+ * Locking events for lockdep
+ */
+LOCK_EVENT(lockdep_acquire)
+LOCK_EVENT(lockdep_lock)
+LOCK_EVENT(lockdep_nocheck)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 4470680..8436f01 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -61,6 +61,7 @@
 #include <asm/sections.h>
 
 #include "lockdep_internals.h"
+#include "lock_events.h"
 
 #include <trace/events/lock.h>
 
@@ -170,6 +171,7 @@ static struct task_struct *lockdep_selftest_task_struct;
 static int graph_lock(void)
 {
 	lockdep_lock();
+	lockevent_inc(lockdep_lock);
 	/*
 	 * Make sure that if another CPU detected a bug while
 	 * walking the graph we dont change it (while the other
@@ -5091,8 +5093,12 @@ static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 	if (unlikely(lock->key == &__lockdep_no_track__))
 		return 0;
 
-	if (!prove_locking || lock->key == &__lockdep_no_validate__)
+	lockevent_inc(lockdep_acquire);
+
+	if (!prove_locking || lock->key == &__lockdep_no_validate__) {
 		check = 0;
+		lockevent_inc(lockdep_nocheck);
+	}
 
 	if (subclass < NR_LOCKDEP_CACHING_CLASSES)
 		class = lock->class_cache[subclass];

[PATCH v4 3/4] locking/lockdep: Disable KASAN instrumentation of lockdep.c

[Waiman Long]

Both KASAN and LOCKDEP are commonly enabled in building a debug kernel.
Each of them can significantly slow down the speed of a debug kernel.
Enabling KASAN instrumentation of the LOCKDEP code will further slow
thing down.

Since LOCKDEP is a high overhead debugging tool, it will never get
enabled in a production kernel. The LOCKDEP code is also pretty mature
and is unlikely to get major changes. There is also a possibility of
recursion similar to KCSAN.

To evaluate the performance impact of disabling KASAN instrumentation
of lockdep.c, the time to do a parallel build of the Linux defconfig
kernel was used as the benchmark. Two x86-64 systems (Skylake & Zen 2)
and an arm64 system were used as test beds. Two sets of non-RT and RT
kernels with similar configurations except mainly CONFIG_PREEMPT_RT
were used for evaulation.

For the Skylake system:

  Kernel			Run time	    Sys time
  ------			--------	    --------
  Non-debug kernel (baseline)	0m47.642s	      4m19.811s

  [CONFIG_KASAN_INLINE=y]
  Debug kernel			2m11.108s (x2.8)     38m20.467s (x8.9)
  Debug kernel (patched)	1m49.602s (x2.3)     31m28.501s (x7.3)
  Debug kernel
  (patched + mitigations=off) 	1m30.988s (x1.9)     26m41.993s (x6.2)

  RT kernel (baseline)		0m54.871s	      7m15.340s

  [CONFIG_KASAN_INLINE=n]
  RT debug kernel		6m07.151s (x6.7)    135m47.428s (x18.7)
  RT debug kernel (patched)	3m42.434s (x4.1)     74m51.636s (x10.3)
  RT debug kernel
  (patched + mitigations=off) 	2m40.383s (x2.9)     57m54.369s (x8.0)

  [CONFIG_KASAN_INLINE=y]
  RT debug kernel		3m22.155s (x3.7)     77m53.018s (x10.7)
  RT debug kernel (patched)	2m36.700s (x2.9)     54m31.195s (x7.5)
  RT debug kernel
  (patched + mitigations=off) 	2m06.110s (x2.3)     45m49.493s (x6.3)

For the Zen 2 system:

  Kernel			Run time	    Sys time
  ------			--------	    --------
  Non-debug kernel (baseline)	1m42.806s	     39m48.714s

  [CONFIG_KASAN_INLINE=y]
  Debug kernel			4m04.524s (x2.4)    125m35.904s (x3.2)
  Debug kernel (patched)	3m56.241s (x2.3)    127m22.378s (x3.2)
  Debug kernel
  (patched + mitigations=off) 	2m38.157s (x1.5)     92m35.680s (x2.3)

  RT kernel (baseline)		 1m51.500s	     14m56.322s

  [CONFIG_KASAN_INLINE=n]
  RT debug kernel		16m04.962s (x8.7)   244m36.463s (x16.4)
  RT debug kernel (patched)	 9m09.073s (x4.9)   129m28.439s (x8.7)
  RT debug kernel
  (patched + mitigations=off) 	 3m31.662s (x1.9)    51m01.391s (x3.4)

For the arm64 system:

  Kernel			Run time	    Sys time
  ------			--------	    --------
  Non-debug kernel (baseline)	1m56.844s	      8m47.150s
  Debug kernel			3m54.774s (x2.0)     92m30.098s (x10.5)
  Debug kernel (patched)	3m32.429s (x1.8)     77m40.779s (x8.8)

  RT kernel (baseline)		 4m01.641s	     18m16.777s

  [CONFIG_KASAN_INLINE=n]
  RT debug kernel		19m32.977s (x4.9)   304m23.965s (x16.7)
  RT debug kernel (patched)	16m28.354s (x4.1)   234m18.149s (x12.8)

Turning the mitigations off doesn't seems to have any noticeable impact
on the performance of the arm64 system. So the mitigation=off entries
aren't included.

For the x86 CPUs, cpu mitigations has a much bigger
impact on performance, especially the RT debug kernel with
CONFIG_KASAN_INLINE=n. The SRSO mitigation in Zen 2 has an especially
big impact on the debug kernel. It is also the majority of the slowdown
with mitigations on. It is because the patched ret instruction slows
down function returns. A lot of helper functions that are normally
compiled out or inlined may become real function calls in the debug
kernel.

With CONFIG_KASAN_INLINE=n, the KASAN instrumentation inserts a
lot of __asan_loadX*() and __kasan_check_read() function calls to memory
access portion of the code. The lockdep's __lock_acquire() function,
for instance, has 66 __asan_loadX*() and 6 __kasan_check_read() calls
added with KASAN instrumentation. Of course, the actual numbers may vary
depending on the compiler used and the exact version of the lockdep code.

With the Skylake test system, the parallel kernel build times reduction
of the RT debug kernel with this patch are:

 CONFIG_KASAN_INLINE=n: -37%
 CONFIG_KASAN_INLINE=y: -22%

The time reduction is less with CONFIG_KASAN_INLINE=y, but it is still
significant.

Setting CONFIG_KASAN_INLINE=y can result in a significant performance
improvement. The major drawback is a significant increase in the size
of kernel text. In the case of vmlinux, its text size increases from
45997948 to 67606807. That is a 47% size increase (about 21 Mbytes). The
size increase of other kernel modules should be similar.

With the newly added rtmutex and lockdep lock events, the relevant
event counts for the test runs with the Skylake system were:

  Event type		Debug kernel	RT debug kernel
  ----------		------------	---------------
  lockdep_acquire	1,968,663,277	5,425,313,953
  rtlock_slowlock	     -		  401,701,156
  rtmutex_slowlock	     -		      139,672

The __lock_acquire() calls in the RT debug kernel are x2.8 times of the
non-RT debug kernel with the same workload. Since the __lock_acquire()
function is a big hitter in term of performance slowdown, this makes
the RT debug kernel much slower than the non-RT one. The average lock
nesting depth is likely to be higher in the RT debug kernel too leading
to longer execution time in the __lock_acquire() function.

As the small advantage of enabling KASAN instrumentation to catch
potential memory access error in the lockdep debugging tool is probably
not worth the drawback of further slowing down a debug kernel, disable
KASAN instrumentation in the lockdep code to allow the debug kernels
to regain some performance back, especially for the RT debug kernels.

Signed-off-by: Waiman Long <longman@redhat.com>
---
 kernel/locking/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/locking/Makefile b/kernel/locking/Makefile
index 0db4093d17b8..a114949eeed5 100644
--- a/kernel/locking/Makefile
+++ b/kernel/locking/Makefile
@@ -5,7 +5,8 @@ KCOV_INSTRUMENT		:= n
 
 obj-y += mutex.o semaphore.o rwsem.o percpu-rwsem.o
 
-# Avoid recursion lockdep -> sanitizer -> ... -> lockdep.
+# Avoid recursion lockdep -> sanitizer -> ... -> lockdep & improve performance.
+KASAN_SANITIZE_lockdep.o := n
 KCSAN_SANITIZE_lockdep.o := n
 
 ifdef CONFIG_FUNCTION_TRACER
-- 
2.48.1

Re: [PATCH v4 3/4] locking/lockdep: Disable KASAN instrumentation of lockdep.c

[Marco Elver]

On Thu, 13 Feb 2025 at 21:02, Waiman Long <longman@redhat.com> wrote:
>
> Both KASAN and LOCKDEP are commonly enabled in building a debug kernel.
> Each of them can significantly slow down the speed of a debug kernel.
> Enabling KASAN instrumentation of the LOCKDEP code will further slow
> thing down.
>
> Since LOCKDEP is a high overhead debugging tool, it will never get
> enabled in a production kernel. The LOCKDEP code is also pretty mature
> and is unlikely to get major changes. There is also a possibility of
> recursion similar to KCSAN.
>
> To evaluate the performance impact of disabling KASAN instrumentation
> of lockdep.c, the time to do a parallel build of the Linux defconfig
> kernel was used as the benchmark. Two x86-64 systems (Skylake & Zen 2)
> and an arm64 system were used as test beds. Two sets of non-RT and RT
> kernels with similar configurations except mainly CONFIG_PREEMPT_RT
> were used for evaulation.
>
> For the Skylake system:
>
>   Kernel                        Run time            Sys time
>   ------                        --------            --------
>   Non-debug kernel (baseline)   0m47.642s             4m19.811s
>
>   [CONFIG_KASAN_INLINE=y]
>   Debug kernel                  2m11.108s (x2.8)     38m20.467s (x8.9)
>   Debug kernel (patched)        1m49.602s (x2.3)     31m28.501s (x7.3)
>   Debug kernel
>   (patched + mitigations=off)   1m30.988s (x1.9)     26m41.993s (x6.2)
>
>   RT kernel (baseline)          0m54.871s             7m15.340s
>
>   [CONFIG_KASAN_INLINE=n]
>   RT debug kernel               6m07.151s (x6.7)    135m47.428s (x18.7)
>   RT debug kernel (patched)     3m42.434s (x4.1)     74m51.636s (x10.3)
>   RT debug kernel
>   (patched + mitigations=off)   2m40.383s (x2.9)     57m54.369s (x8.0)
>
>   [CONFIG_KASAN_INLINE=y]
>   RT debug kernel               3m22.155s (x3.7)     77m53.018s (x10.7)
>   RT debug kernel (patched)     2m36.700s (x2.9)     54m31.195s (x7.5)
>   RT debug kernel
>   (patched + mitigations=off)   2m06.110s (x2.3)     45m49.493s (x6.3)
>
> For the Zen 2 system:
>
>   Kernel                        Run time            Sys time
>   ------                        --------            --------
>   Non-debug kernel (baseline)   1m42.806s            39m48.714s
>
>   [CONFIG_KASAN_INLINE=y]
>   Debug kernel                  4m04.524s (x2.4)    125m35.904s (x3.2)
>   Debug kernel (patched)        3m56.241s (x2.3)    127m22.378s (x3.2)
>   Debug kernel
>   (patched + mitigations=off)   2m38.157s (x1.5)     92m35.680s (x2.3)
>
>   RT kernel (baseline)           1m51.500s           14m56.322s
>
>   [CONFIG_KASAN_INLINE=n]
>   RT debug kernel               16m04.962s (x8.7)   244m36.463s (x16.4)
>   RT debug kernel (patched)      9m09.073s (x4.9)   129m28.439s (x8.7)
>   RT debug kernel
>   (patched + mitigations=off)    3m31.662s (x1.9)    51m01.391s (x3.4)
>
> For the arm64 system:
>
>   Kernel                        Run time            Sys time
>   ------                        --------            --------
>   Non-debug kernel (baseline)   1m56.844s             8m47.150s
>   Debug kernel                  3m54.774s (x2.0)     92m30.098s (x10.5)
>   Debug kernel (patched)        3m32.429s (x1.8)     77m40.779s (x8.8)
>
>   RT kernel (baseline)           4m01.641s           18m16.777s
>
>   [CONFIG_KASAN_INLINE=n]
>   RT debug kernel               19m32.977s (x4.9)   304m23.965s (x16.7)
>   RT debug kernel (patched)     16m28.354s (x4.1)   234m18.149s (x12.8)
>
> Turning the mitigations off doesn't seems to have any noticeable impact
> on the performance of the arm64 system. So the mitigation=off entries
> aren't included.
>
> For the x86 CPUs, cpu mitigations has a much bigger
> impact on performance, especially the RT debug kernel with
> CONFIG_KASAN_INLINE=n. The SRSO mitigation in Zen 2 has an especially
> big impact on the debug kernel. It is also the majority of the slowdown
> with mitigations on. It is because the patched ret instruction slows
> down function returns. A lot of helper functions that are normally
> compiled out or inlined may become real function calls in the debug
> kernel.
>
> With CONFIG_KASAN_INLINE=n, the KASAN instrumentation inserts a
> lot of __asan_loadX*() and __kasan_check_read() function calls to memory
> access portion of the code. The lockdep's __lock_acquire() function,
> for instance, has 66 __asan_loadX*() and 6 __kasan_check_read() calls
> added with KASAN instrumentation. Of course, the actual numbers may vary
> depending on the compiler used and the exact version of the lockdep code.
>
> With the Skylake test system, the parallel kernel build times reduction
> of the RT debug kernel with this patch are:
>
>  CONFIG_KASAN_INLINE=n: -37%
>  CONFIG_KASAN_INLINE=y: -22%
>
> The time reduction is less with CONFIG_KASAN_INLINE=y, but it is still
> significant.
>
> Setting CONFIG_KASAN_INLINE=y can result in a significant performance
> improvement. The major drawback is a significant increase in the size
> of kernel text. In the case of vmlinux, its text size increases from
> 45997948 to 67606807. That is a 47% size increase (about 21 Mbytes). The
> size increase of other kernel modules should be similar.
>
> With the newly added rtmutex and lockdep lock events, the relevant
> event counts for the test runs with the Skylake system were:
>
>   Event type            Debug kernel    RT debug kernel
>   ----------            ------------    ---------------
>   lockdep_acquire       1,968,663,277   5,425,313,953
>   rtlock_slowlock            -            401,701,156
>   rtmutex_slowlock           -                139,672
>
> The __lock_acquire() calls in the RT debug kernel are x2.8 times of the
> non-RT debug kernel with the same workload. Since the __lock_acquire()
> function is a big hitter in term of performance slowdown, this makes
> the RT debug kernel much slower than the non-RT one. The average lock
> nesting depth is likely to be higher in the RT debug kernel too leading
> to longer execution time in the __lock_acquire() function.
>
> As the small advantage of enabling KASAN instrumentation to catch
> potential memory access error in the lockdep debugging tool is probably
> not worth the drawback of further slowing down a debug kernel, disable
> KASAN instrumentation in the lockdep code to allow the debug kernels
> to regain some performance back, especially for the RT debug kernels.
>
> Signed-off-by: Waiman Long <longman@redhat.com>

Reviewed-by: Marco Elver <elver@google.com>

> ---
>  kernel/locking/Makefile | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/kernel/locking/Makefile b/kernel/locking/Makefile
> index 0db4093d17b8..a114949eeed5 100644
> --- a/kernel/locking/Makefile
> +++ b/kernel/locking/Makefile
> @@ -5,7 +5,8 @@ KCOV_INSTRUMENT         := n
>
>  obj-y += mutex.o semaphore.o rwsem.o percpu-rwsem.o
>
> -# Avoid recursion lockdep -> sanitizer -> ... -> lockdep.
> +# Avoid recursion lockdep -> sanitizer -> ... -> lockdep & improve performance.
> +KASAN_SANITIZE_lockdep.o := n
>  KCSAN_SANITIZE_lockdep.o := n
>
>  ifdef CONFIG_FUNCTION_TRACER
> --
> 2.48.1
>

Re: [PATCH v4 3/4] locking/lockdep: Disable KASAN instrumentation of lockdep.c

[Andrey Konovalov]

On Thu, Feb 13, 2025 at 9:02 PM Waiman Long <longman@redhat.com> wrote:
>
> Both KASAN and LOCKDEP are commonly enabled in building a debug kernel.
> Each of them can significantly slow down the speed of a debug kernel.
> Enabling KASAN instrumentation of the LOCKDEP code will further slow
> thing down.
>
> Since LOCKDEP is a high overhead debugging tool, it will never get
> enabled in a production kernel. The LOCKDEP code is also pretty mature
> and is unlikely to get major changes. There is also a possibility of
> recursion similar to KCSAN.
>
> To evaluate the performance impact of disabling KASAN instrumentation
> of lockdep.c, the time to do a parallel build of the Linux defconfig
> kernel was used as the benchmark. Two x86-64 systems (Skylake & Zen 2)
> and an arm64 system were used as test beds. Two sets of non-RT and RT
> kernels with similar configurations except mainly CONFIG_PREEMPT_RT
> were used for evaulation.
>
> For the Skylake system:
>
>   Kernel                        Run time            Sys time
>   ------                        --------            --------
>   Non-debug kernel (baseline)   0m47.642s             4m19.811s
>
>   [CONFIG_KASAN_INLINE=y]
>   Debug kernel                  2m11.108s (x2.8)     38m20.467s (x8.9)
>   Debug kernel (patched)        1m49.602s (x2.3)     31m28.501s (x7.3)
>   Debug kernel
>   (patched + mitigations=off)   1m30.988s (x1.9)     26m41.993s (x6.2)
>
>   RT kernel (baseline)          0m54.871s             7m15.340s
>
>   [CONFIG_KASAN_INLINE=n]
>   RT debug kernel               6m07.151s (x6.7)    135m47.428s (x18.7)
>   RT debug kernel (patched)     3m42.434s (x4.1)     74m51.636s (x10.3)
>   RT debug kernel
>   (patched + mitigations=off)   2m40.383s (x2.9)     57m54.369s (x8.0)
>
>   [CONFIG_KASAN_INLINE=y]
>   RT debug kernel               3m22.155s (x3.7)     77m53.018s (x10.7)
>   RT debug kernel (patched)     2m36.700s (x2.9)     54m31.195s (x7.5)
>   RT debug kernel
>   (patched + mitigations=off)   2m06.110s (x2.3)     45m49.493s (x6.3)
>
> For the Zen 2 system:
>
>   Kernel                        Run time            Sys time
>   ------                        --------            --------
>   Non-debug kernel (baseline)   1m42.806s            39m48.714s
>
>   [CONFIG_KASAN_INLINE=y]
>   Debug kernel                  4m04.524s (x2.4)    125m35.904s (x3.2)
>   Debug kernel (patched)        3m56.241s (x2.3)    127m22.378s (x3.2)
>   Debug kernel
>   (patched + mitigations=off)   2m38.157s (x1.5)     92m35.680s (x2.3)
>
>   RT kernel (baseline)           1m51.500s           14m56.322s
>
>   [CONFIG_KASAN_INLINE=n]
>   RT debug kernel               16m04.962s (x8.7)   244m36.463s (x16.4)
>   RT debug kernel (patched)      9m09.073s (x4.9)   129m28.439s (x8.7)
>   RT debug kernel
>   (patched + mitigations=off)    3m31.662s (x1.9)    51m01.391s (x3.4)
>
> For the arm64 system:
>
>   Kernel                        Run time            Sys time
>   ------                        --------            --------
>   Non-debug kernel (baseline)   1m56.844s             8m47.150s
>   Debug kernel                  3m54.774s (x2.0)     92m30.098s (x10.5)
>   Debug kernel (patched)        3m32.429s (x1.8)     77m40.779s (x8.8)
>
>   RT kernel (baseline)           4m01.641s           18m16.777s
>
>   [CONFIG_KASAN_INLINE=n]
>   RT debug kernel               19m32.977s (x4.9)   304m23.965s (x16.7)
>   RT debug kernel (patched)     16m28.354s (x4.1)   234m18.149s (x12.8)
>
> Turning the mitigations off doesn't seems to have any noticeable impact
> on the performance of the arm64 system. So the mitigation=off entries
> aren't included.
>
> For the x86 CPUs, cpu mitigations has a much bigger
> impact on performance, especially the RT debug kernel with
> CONFIG_KASAN_INLINE=n. The SRSO mitigation in Zen 2 has an especially
> big impact on the debug kernel. It is also the majority of the slowdown
> with mitigations on. It is because the patched ret instruction slows
> down function returns. A lot of helper functions that are normally
> compiled out or inlined may become real function calls in the debug
> kernel.
>
> With CONFIG_KASAN_INLINE=n, the KASAN instrumentation inserts a
> lot of __asan_loadX*() and __kasan_check_read() function calls to memory
> access portion of the code. The lockdep's __lock_acquire() function,
> for instance, has 66 __asan_loadX*() and 6 __kasan_check_read() calls
> added with KASAN instrumentation. Of course, the actual numbers may vary
> depending on the compiler used and the exact version of the lockdep code.
>
> With the Skylake test system, the parallel kernel build times reduction
> of the RT debug kernel with this patch are:
>
>  CONFIG_KASAN_INLINE=n: -37%
>  CONFIG_KASAN_INLINE=y: -22%
>
> The time reduction is less with CONFIG_KASAN_INLINE=y, but it is still
> significant.
>
> Setting CONFIG_KASAN_INLINE=y can result in a significant performance
> improvement. The major drawback is a significant increase in the size
> of kernel text. In the case of vmlinux, its text size increases from
> 45997948 to 67606807. That is a 47% size increase (about 21 Mbytes). The
> size increase of other kernel modules should be similar.
>
> With the newly added rtmutex and lockdep lock events, the relevant
> event counts for the test runs with the Skylake system were:
>
>   Event type            Debug kernel    RT debug kernel
>   ----------            ------------    ---------------
>   lockdep_acquire       1,968,663,277   5,425,313,953
>   rtlock_slowlock            -            401,701,156
>   rtmutex_slowlock           -                139,672
>
> The __lock_acquire() calls in the RT debug kernel are x2.8 times of the
> non-RT debug kernel with the same workload. Since the __lock_acquire()
> function is a big hitter in term of performance slowdown, this makes
> the RT debug kernel much slower than the non-RT one. The average lock
> nesting depth is likely to be higher in the RT debug kernel too leading
> to longer execution time in the __lock_acquire() function.
>
> As the small advantage of enabling KASAN instrumentation to catch
> potential memory access error in the lockdep debugging tool is probably
> not worth the drawback of further slowing down a debug kernel, disable
> KASAN instrumentation in the lockdep code to allow the debug kernels
> to regain some performance back, especially for the RT debug kernels.
>
> Signed-off-by: Waiman Long <longman@redhat.com>
> ---
>  kernel/locking/Makefile | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/kernel/locking/Makefile b/kernel/locking/Makefile
> index 0db4093d17b8..a114949eeed5 100644
> --- a/kernel/locking/Makefile
> +++ b/kernel/locking/Makefile
> @@ -5,7 +5,8 @@ KCOV_INSTRUMENT         := n
>
>  obj-y += mutex.o semaphore.o rwsem.o percpu-rwsem.o
>
> -# Avoid recursion lockdep -> sanitizer -> ... -> lockdep.
> +# Avoid recursion lockdep -> sanitizer -> ... -> lockdep & improve performance.
> +KASAN_SANITIZE_lockdep.o := n
>  KCSAN_SANITIZE_lockdep.o := n
>
>  ifdef CONFIG_FUNCTION_TRACER
> --
> 2.48.1
>

Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>

[tip: locking/core] locking/lockdep: Disable KASAN instrumentation of lockdep.c

[tip-bot2 for Waiman Long]

The following commit has been merged into the locking/core branch of tip:

Commit-ID:     59e2312d95f97738dad5c7cbbe3e54c176f24fc7
Gitweb:        https://git.kernel.org/tip/59e2312d95f97738dad5c7cbbe3e54c176f24fc7
Author:        Waiman Long <longman@redhat.com>
AuthorDate:    Thu, 13 Feb 2025 15:02:27 -05:00
Committer:     Boqun Feng <boqun.feng@gmail.com>
CommitterDate: Sun, 23 Feb 2025 18:24:46 -08:00

locking/lockdep: Disable KASAN instrumentation of lockdep.c

Both KASAN and LOCKDEP are commonly enabled in building a debug kernel.
Each of them can significantly slow down the speed of a debug kernel.
Enabling KASAN instrumentation of the LOCKDEP code will further slow
thing down.

Since LOCKDEP is a high overhead debugging tool, it will never get
enabled in a production kernel. The LOCKDEP code is also pretty mature
and is unlikely to get major changes. There is also a possibility of
recursion similar to KCSAN.

To evaluate the performance impact of disabling KASAN instrumentation
of lockdep.c, the time to do a parallel build of the Linux defconfig
kernel was used as the benchmark. Two x86-64 systems (Skylake & Zen 2)
and an arm64 system were used as test beds. Two sets of non-RT and RT
kernels with similar configurations except mainly CONFIG_PREEMPT_RT
were used for evaulation.

For the Skylake system:

  Kernel			Run time	    Sys time
  ------			--------	    --------
  Non-debug kernel (baseline)	0m47.642s	      4m19.811s

  [CONFIG_KASAN_INLINE=y]
  Debug kernel			2m11.108s (x2.8)     38m20.467s (x8.9)
  Debug kernel (patched)	1m49.602s (x2.3)     31m28.501s (x7.3)
  Debug kernel
  (patched + mitigations=off) 	1m30.988s (x1.9)     26m41.993s (x6.2)

  RT kernel (baseline)		0m54.871s	      7m15.340s

  [CONFIG_KASAN_INLINE=n]
  RT debug kernel		6m07.151s (x6.7)    135m47.428s (x18.7)
  RT debug kernel (patched)	3m42.434s (x4.1)     74m51.636s (x10.3)
  RT debug kernel
  (patched + mitigations=off) 	2m40.383s (x2.9)     57m54.369s (x8.0)

  [CONFIG_KASAN_INLINE=y]
  RT debug kernel		3m22.155s (x3.7)     77m53.018s (x10.7)
  RT debug kernel (patched)	2m36.700s (x2.9)     54m31.195s (x7.5)
  RT debug kernel
  (patched + mitigations=off) 	2m06.110s (x2.3)     45m49.493s (x6.3)

For the Zen 2 system:

  Kernel			Run time	    Sys time
  ------			--------	    --------
  Non-debug kernel (baseline)	1m42.806s	     39m48.714s

  [CONFIG_KASAN_INLINE=y]
  Debug kernel			4m04.524s (x2.4)    125m35.904s (x3.2)
  Debug kernel (patched)	3m56.241s (x2.3)    127m22.378s (x3.2)
  Debug kernel
  (patched + mitigations=off) 	2m38.157s (x1.5)     92m35.680s (x2.3)

  RT kernel (baseline)		 1m51.500s	     14m56.322s

  [CONFIG_KASAN_INLINE=n]
  RT debug kernel		16m04.962s (x8.7)   244m36.463s (x16.4)
  RT debug kernel (patched)	 9m09.073s (x4.9)   129m28.439s (x8.7)
  RT debug kernel
  (patched + mitigations=off) 	 3m31.662s (x1.9)    51m01.391s (x3.4)

For the arm64 system:

  Kernel			Run time	    Sys time
  ------			--------	    --------
  Non-debug kernel (baseline)	1m56.844s	      8m47.150s
  Debug kernel			3m54.774s (x2.0)     92m30.098s (x10.5)
  Debug kernel (patched)	3m32.429s (x1.8)     77m40.779s (x8.8)

  RT kernel (baseline)		 4m01.641s	     18m16.777s

  [CONFIG_KASAN_INLINE=n]
  RT debug kernel		19m32.977s (x4.9)   304m23.965s (x16.7)
  RT debug kernel (patched)	16m28.354s (x4.1)   234m18.149s (x12.8)

Turning the mitigations off doesn't seems to have any noticeable impact
on the performance of the arm64 system. So the mitigation=off entries
aren't included.

For the x86 CPUs, cpu mitigations has a much bigger
impact on performance, especially the RT debug kernel with
CONFIG_KASAN_INLINE=n. The SRSO mitigation in Zen 2 has an especially
big impact on the debug kernel. It is also the majority of the slowdown
with mitigations on. It is because the patched ret instruction slows
down function returns. A lot of helper functions that are normally
compiled out or inlined may become real function calls in the debug
kernel.

With CONFIG_KASAN_INLINE=n, the KASAN instrumentation inserts a
lot of __asan_loadX*() and __kasan_check_read() function calls to memory
access portion of the code. The lockdep's __lock_acquire() function,
for instance, has 66 __asan_loadX*() and 6 __kasan_check_read() calls
added with KASAN instrumentation. Of course, the actual numbers may vary
depending on the compiler used and the exact version of the lockdep code.

With the Skylake test system, the parallel kernel build times reduction
of the RT debug kernel with this patch are:

 CONFIG_KASAN_INLINE=n: -37%
 CONFIG_KASAN_INLINE=y: -22%

The time reduction is less with CONFIG_KASAN_INLINE=y, but it is still
significant.

Setting CONFIG_KASAN_INLINE=y can result in a significant performance
improvement. The major drawback is a significant increase in the size
of kernel text. In the case of vmlinux, its text size increases from
45997948 to 67606807. That is a 47% size increase (about 21 Mbytes). The
size increase of other kernel modules should be similar.

With the newly added rtmutex and lockdep lock events, the relevant
event counts for the test runs with the Skylake system were:

  Event type		Debug kernel	RT debug kernel
  ----------		------------	---------------
  lockdep_acquire	1,968,663,277	5,425,313,953
  rtlock_slowlock	     -		  401,701,156
  rtmutex_slowlock	     -		      139,672

The __lock_acquire() calls in the RT debug kernel are x2.8 times of the
non-RT debug kernel with the same workload. Since the __lock_acquire()
function is a big hitter in term of performance slowdown, this makes
the RT debug kernel much slower than the non-RT one. The average lock
nesting depth is likely to be higher in the RT debug kernel too leading
to longer execution time in the __lock_acquire() function.

As the small advantage of enabling KASAN instrumentation to catch
potential memory access error in the lockdep debugging tool is probably
not worth the drawback of further slowing down a debug kernel, disable
KASAN instrumentation in the lockdep code to allow the debug kernels
to regain some performance back, especially for the RT debug kernels.

Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250213200228.1993588-4-longman@redhat.com
---
 kernel/locking/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/locking/Makefile b/kernel/locking/Makefile
index 0db4093..a114949 100644
--- a/kernel/locking/Makefile
+++ b/kernel/locking/Makefile
@@ -5,7 +5,8 @@ KCOV_INSTRUMENT		:= n
 
 obj-y += mutex.o semaphore.o rwsem.o percpu-rwsem.o
 
-# Avoid recursion lockdep -> sanitizer -> ... -> lockdep.
+# Avoid recursion lockdep -> sanitizer -> ... -> lockdep & improve performance.
+KASAN_SANITIZE_lockdep.o := n
 KCSAN_SANITIZE_lockdep.o := n
 
 ifdef CONFIG_FUNCTION_TRACER

[PATCH v4 4/4] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Waiman Long]

KASAN instrumentation of lockdep has been disabled as we don't need
KASAN to check the validity of lockdep internal data structures and
incur unnecessary performance overhead. However, the lockdep_map pointer
passed in externally may not be valid (e.g. use-after-free) and we run
the risk of using garbage data resulting in false lockdep reports. Add
kasan_check_byte() call in lock_acquire() for non kernel core data
object to catch invalid lockdep_map and abort lockdep processing if
input data isn't valid.

Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Waiman Long <longman@redhat.com>
---
 kernel/locking/lock_events_list.h |  1 +
 kernel/locking/lockdep.c          | 14 ++++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
index 9ef9850aeebe..bed59b2195c7 100644
--- a/kernel/locking/lock_events_list.h
+++ b/kernel/locking/lock_events_list.h
@@ -95,3 +95,4 @@ LOCK_EVENT(rtmutex_deadlock)	/* # of rt_mutex_handle_deadlock()'s	*/
 LOCK_EVENT(lockdep_acquire)
 LOCK_EVENT(lockdep_lock)
 LOCK_EVENT(lockdep_nocheck)
+LOCK_EVENT(lockdep_kasan_fail)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 8436f017c74d..98dd0455d4be 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -57,6 +57,7 @@
 #include <linux/lockdep.h>
 #include <linux/context_tracking.h>
 #include <linux/console.h>
+#include <linux/kasan.h>
 
 #include <asm/sections.h>
 
@@ -5830,6 +5831,19 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 	if (!debug_locks)
 		return;
 
+	/*
+	 * As KASAN instrumentation is disabled and lock_acquire() is usually
+	 * the first lockdep call when a task tries to acquire a lock, add
+	 * kasan_check_byte() here to check for use-after-free of non kernel
+	 * core lockdep_map data to avoid referencing garbage data.
+	 */
+	if (unlikely(IS_ENABLED(CONFIG_KASAN) &&
+		     !is_kernel_core_data((unsigned long)lock) &&
+		     !kasan_check_byte(lock))) {
+		lockevent_inc(lockdep_kasan_fail);
+		return;
+	}
+
 	if (unlikely(!lockdep_enabled())) {
 		/* XXX allow trylock from NMI ?!? */
 		if (lockdep_nmi() && !trylock) {
-- 
2.48.1

Re: [PATCH v4 4/4] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Marco Elver]

On Thu, 13 Feb 2025 at 21:02, Waiman Long <longman@redhat.com> wrote:
>
> KASAN instrumentation of lockdep has been disabled as we don't need
> KASAN to check the validity of lockdep internal data structures and
> incur unnecessary performance overhead. However, the lockdep_map pointer
> passed in externally may not be valid (e.g. use-after-free) and we run
> the risk of using garbage data resulting in false lockdep reports. Add
> kasan_check_byte() call in lock_acquire() for non kernel core data
> object to catch invalid lockdep_map and abort lockdep processing if
> input data isn't valid.
>
> Suggested-by: Marco Elver <elver@google.com>
> Signed-off-by: Waiman Long <longman@redhat.com>

Reviewed-by: Marco Elver <elver@google.com>

but double-check if the below can be simplified.

> ---
>  kernel/locking/lock_events_list.h |  1 +
>  kernel/locking/lockdep.c          | 14 ++++++++++++++
>  2 files changed, 15 insertions(+)
>
> diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
> index 9ef9850aeebe..bed59b2195c7 100644
> --- a/kernel/locking/lock_events_list.h
> +++ b/kernel/locking/lock_events_list.h
> @@ -95,3 +95,4 @@ LOCK_EVENT(rtmutex_deadlock)  /* # of rt_mutex_handle_deadlock()'s    */
>  LOCK_EVENT(lockdep_acquire)
>  LOCK_EVENT(lockdep_lock)
>  LOCK_EVENT(lockdep_nocheck)
> +LOCK_EVENT(lockdep_kasan_fail)
> diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
> index 8436f017c74d..98dd0455d4be 100644
> --- a/kernel/locking/lockdep.c
> +++ b/kernel/locking/lockdep.c
> @@ -57,6 +57,7 @@
>  #include <linux/lockdep.h>
>  #include <linux/context_tracking.h>
>  #include <linux/console.h>
> +#include <linux/kasan.h>
>
>  #include <asm/sections.h>
>
> @@ -5830,6 +5831,19 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
>         if (!debug_locks)
>                 return;
>
> +       /*
> +        * As KASAN instrumentation is disabled and lock_acquire() is usually
> +        * the first lockdep call when a task tries to acquire a lock, add
> +        * kasan_check_byte() here to check for use-after-free of non kernel
> +        * core lockdep_map data to avoid referencing garbage data.
> +        */
> +       if (unlikely(IS_ENABLED(CONFIG_KASAN) &&

This is not needed - kasan_check_byte() will always return true if
KASAN is disabled or not compiled in.

> +                    !is_kernel_core_data((unsigned long)lock) &&

Why use !is_kernel_core_data()? Is it to improve performance?

> +                    !kasan_check_byte(lock))) {
> +               lockevent_inc(lockdep_kasan_fail);
> +               return;
> +       }
> +
>         if (unlikely(!lockdep_enabled())) {
>                 /* XXX allow trylock from NMI ?!? */
>                 if (lockdep_nmi() && !trylock) {
> --
> 2.48.1
>
> --
> You received this message because you are subscribed to the Google Groups "kasan-dev" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to kasan-dev+unsubscribe@googlegroups.com.
> To view this discussion visit https://groups.google.com/d/msgid/kasan-dev/20250213200228.1993588-5-longman%40redhat.com.

Re: [PATCH v4 4/4] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Waiman Long]

On 2/14/25 5:44 AM, Marco Elver wrote:
> On Thu, 13 Feb 2025 at 21:02, Waiman Long <longman@redhat.com> wrote:
>> KASAN instrumentation of lockdep has been disabled as we don't need
>> KASAN to check the validity of lockdep internal data structures and
>> incur unnecessary performance overhead. However, the lockdep_map pointer
>> passed in externally may not be valid (e.g. use-after-free) and we run
>> the risk of using garbage data resulting in false lockdep reports. Add
>> kasan_check_byte() call in lock_acquire() for non kernel core data
>> object to catch invalid lockdep_map and abort lockdep processing if
>> input data isn't valid.
>>
>> Suggested-by: Marco Elver <elver@google.com>
>> Signed-off-by: Waiman Long <longman@redhat.com>
> Reviewed-by: Marco Elver <elver@google.com>
>
> but double-check if the below can be simplified.
>
>> ---
>>   kernel/locking/lock_events_list.h |  1 +
>>   kernel/locking/lockdep.c          | 14 ++++++++++++++
>>   2 files changed, 15 insertions(+)
>>
>> diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
>> index 9ef9850aeebe..bed59b2195c7 100644
>> --- a/kernel/locking/lock_events_list.h
>> +++ b/kernel/locking/lock_events_list.h
>> @@ -95,3 +95,4 @@ LOCK_EVENT(rtmutex_deadlock)  /* # of rt_mutex_handle_deadlock()'s    */
>>   LOCK_EVENT(lockdep_acquire)
>>   LOCK_EVENT(lockdep_lock)
>>   LOCK_EVENT(lockdep_nocheck)
>> +LOCK_EVENT(lockdep_kasan_fail)
>> diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
>> index 8436f017c74d..98dd0455d4be 100644
>> --- a/kernel/locking/lockdep.c
>> +++ b/kernel/locking/lockdep.c
>> @@ -57,6 +57,7 @@
>>   #include <linux/lockdep.h>
>>   #include <linux/context_tracking.h>
>>   #include <linux/console.h>
>> +#include <linux/kasan.h>
>>
>>   #include <asm/sections.h>
>>
>> @@ -5830,6 +5831,19 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
>>          if (!debug_locks)
>>                  return;
>>
>> +       /*
>> +        * As KASAN instrumentation is disabled and lock_acquire() is usually
>> +        * the first lockdep call when a task tries to acquire a lock, add
>> +        * kasan_check_byte() here to check for use-after-free of non kernel
>> +        * core lockdep_map data to avoid referencing garbage data.
>> +        */
>> +       if (unlikely(IS_ENABLED(CONFIG_KASAN) &&
> This is not needed - kasan_check_byte() will always return true if
> KASAN is disabled or not compiled in.
I added this check because of the is_kernel_core_data() call.
>
>> +                    !is_kernel_core_data((unsigned long)lock) &&
> Why use !is_kernel_core_data()? Is it to improve performance?

Not exactly. In my testing, just using kasan_check_byte() doesn't quite 
work out. It seems to return false positive in some cases causing 
lockdep splat. I didn't look into exactly why this happens and I added 
the is_kernel_core_data() call to work around that.

Cheers,
Longman

Re: [PATCH v4 4/4] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Marco Elver]

On Fri, 14 Feb 2025 at 15:09, Waiman Long <llong@redhat.com> wrote:
>
> On 2/14/25 5:44 AM, Marco Elver wrote:
> > On Thu, 13 Feb 2025 at 21:02, Waiman Long <longman@redhat.com> wrote:
> >> KASAN instrumentation of lockdep has been disabled as we don't need
> >> KASAN to check the validity of lockdep internal data structures and
> >> incur unnecessary performance overhead. However, the lockdep_map pointer
> >> passed in externally may not be valid (e.g. use-after-free) and we run
> >> the risk of using garbage data resulting in false lockdep reports. Add
> >> kasan_check_byte() call in lock_acquire() for non kernel core data
> >> object to catch invalid lockdep_map and abort lockdep processing if
> >> input data isn't valid.
> >>
> >> Suggested-by: Marco Elver <elver@google.com>
> >> Signed-off-by: Waiman Long <longman@redhat.com>
> > Reviewed-by: Marco Elver <elver@google.com>
> >
> > but double-check if the below can be simplified.
> >
> >> ---
> >>   kernel/locking/lock_events_list.h |  1 +
> >>   kernel/locking/lockdep.c          | 14 ++++++++++++++
> >>   2 files changed, 15 insertions(+)
> >>
> >> diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
> >> index 9ef9850aeebe..bed59b2195c7 100644
> >> --- a/kernel/locking/lock_events_list.h
> >> +++ b/kernel/locking/lock_events_list.h
> >> @@ -95,3 +95,4 @@ LOCK_EVENT(rtmutex_deadlock)  /* # of rt_mutex_handle_deadlock()'s    */
> >>   LOCK_EVENT(lockdep_acquire)
> >>   LOCK_EVENT(lockdep_lock)
> >>   LOCK_EVENT(lockdep_nocheck)
> >> +LOCK_EVENT(lockdep_kasan_fail)
> >> diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
> >> index 8436f017c74d..98dd0455d4be 100644
> >> --- a/kernel/locking/lockdep.c
> >> +++ b/kernel/locking/lockdep.c
> >> @@ -57,6 +57,7 @@
> >>   #include <linux/lockdep.h>
> >>   #include <linux/context_tracking.h>
> >>   #include <linux/console.h>
> >> +#include <linux/kasan.h>
> >>
> >>   #include <asm/sections.h>
> >>
> >> @@ -5830,6 +5831,19 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
> >>          if (!debug_locks)
> >>                  return;
> >>
> >> +       /*
> >> +        * As KASAN instrumentation is disabled and lock_acquire() is usually
> >> +        * the first lockdep call when a task tries to acquire a lock, add
> >> +        * kasan_check_byte() here to check for use-after-free of non kernel
> >> +        * core lockdep_map data to avoid referencing garbage data.
> >> +        */
> >> +       if (unlikely(IS_ENABLED(CONFIG_KASAN) &&
> > This is not needed - kasan_check_byte() will always return true if
> > KASAN is disabled or not compiled in.
> I added this check because of the is_kernel_core_data() call.
> >
> >> +                    !is_kernel_core_data((unsigned long)lock) &&
> > Why use !is_kernel_core_data()? Is it to improve performance?
>
> Not exactly. In my testing, just using kasan_check_byte() doesn't quite
> work out. It seems to return false positive in some cases causing
> lockdep splat. I didn't look into exactly why this happens and I added
> the is_kernel_core_data() call to work around that.

Globals should have their shadow memory unpoisoned by default, so
that's definitely odd.

Out of curiosity, do you have such a false positive splat? Wondering
which data it's accessing. Maybe that'll tell us more about what's
wrong.

Re: [PATCH v4 4/4] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Waiman Long]

On 2/14/25 9:44 AM, Marco Elver wrote:
> On Fri, 14 Feb 2025 at 15:09, Waiman Long <llong@redhat.com> wrote:
>> On 2/14/25 5:44 AM, Marco Elver wrote:
>>> On Thu, 13 Feb 2025 at 21:02, Waiman Long <longman@redhat.com> wrote:
>>>> KASAN instrumentation of lockdep has been disabled as we don't need
>>>> KASAN to check the validity of lockdep internal data structures and
>>>> incur unnecessary performance overhead. However, the lockdep_map pointer
>>>> passed in externally may not be valid (e.g. use-after-free) and we run
>>>> the risk of using garbage data resulting in false lockdep reports. Add
>>>> kasan_check_byte() call in lock_acquire() for non kernel core data
>>>> object to catch invalid lockdep_map and abort lockdep processing if
>>>> input data isn't valid.
>>>>
>>>> Suggested-by: Marco Elver <elver@google.com>
>>>> Signed-off-by: Waiman Long <longman@redhat.com>
>>> Reviewed-by: Marco Elver <elver@google.com>
>>>
>>> but double-check if the below can be simplified.
>>>
>>>> ---
>>>>    kernel/locking/lock_events_list.h |  1 +
>>>>    kernel/locking/lockdep.c          | 14 ++++++++++++++
>>>>    2 files changed, 15 insertions(+)
>>>>
>>>> diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
>>>> index 9ef9850aeebe..bed59b2195c7 100644
>>>> --- a/kernel/locking/lock_events_list.h
>>>> +++ b/kernel/locking/lock_events_list.h
>>>> @@ -95,3 +95,4 @@ LOCK_EVENT(rtmutex_deadlock)  /* # of rt_mutex_handle_deadlock()'s    */
>>>>    LOCK_EVENT(lockdep_acquire)
>>>>    LOCK_EVENT(lockdep_lock)
>>>>    LOCK_EVENT(lockdep_nocheck)
>>>> +LOCK_EVENT(lockdep_kasan_fail)
>>>> diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
>>>> index 8436f017c74d..98dd0455d4be 100644
>>>> --- a/kernel/locking/lockdep.c
>>>> +++ b/kernel/locking/lockdep.c
>>>> @@ -57,6 +57,7 @@
>>>>    #include <linux/lockdep.h>
>>>>    #include <linux/context_tracking.h>
>>>>    #include <linux/console.h>
>>>> +#include <linux/kasan.h>
>>>>
>>>>    #include <asm/sections.h>
>>>>
>>>> @@ -5830,6 +5831,19 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
>>>>           if (!debug_locks)
>>>>                   return;
>>>>
>>>> +       /*
>>>> +        * As KASAN instrumentation is disabled and lock_acquire() is usually
>>>> +        * the first lockdep call when a task tries to acquire a lock, add
>>>> +        * kasan_check_byte() here to check for use-after-free of non kernel
>>>> +        * core lockdep_map data to avoid referencing garbage data.
>>>> +        */
>>>> +       if (unlikely(IS_ENABLED(CONFIG_KASAN) &&
>>> This is not needed - kasan_check_byte() will always return true if
>>> KASAN is disabled or not compiled in.
>> I added this check because of the is_kernel_core_data() call.
>>>> +                    !is_kernel_core_data((unsigned long)lock) &&
>>> Why use !is_kernel_core_data()? Is it to improve performance?
>> Not exactly. In my testing, just using kasan_check_byte() doesn't quite
>> work out. It seems to return false positive in some cases causing
>> lockdep splat. I didn't look into exactly why this happens and I added
>> the is_kernel_core_data() call to work around that.
> Globals should have their shadow memory unpoisoned by default, so
> that's definitely odd.
>
> Out of curiosity, do you have such a false positive splat? Wondering
> which data it's accessing. Maybe that'll tell us more about what's
> wrong.

Will do more investigation about this and let you know the result.

Cheers,
Longman

>

Re: [PATCH v4 4/4] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Waiman Long]

On 2/14/25 9:44 AM, Marco Elver wrote:
> On Fri, 14 Feb 2025 at 15:09, Waiman Long <llong@redhat.com> wrote:
>> On 2/14/25 5:44 AM, Marco Elver wrote:
>>> On Thu, 13 Feb 2025 at 21:02, Waiman Long <longman@redhat.com> wrote:
>>>> KASAN instrumentation of lockdep has been disabled as we don't need
>>>> KASAN to check the validity of lockdep internal data structures and
>>>> incur unnecessary performance overhead. However, the lockdep_map pointer
>>>> passed in externally may not be valid (e.g. use-after-free) and we run
>>>> the risk of using garbage data resulting in false lockdep reports. Add
>>>> kasan_check_byte() call in lock_acquire() for non kernel core data
>>>> object to catch invalid lockdep_map and abort lockdep processing if
>>>> input data isn't valid.
>>>>
>>>> Suggested-by: Marco Elver <elver@google.com>
>>>> Signed-off-by: Waiman Long <longman@redhat.com>
>>> Reviewed-by: Marco Elver <elver@google.com>
>>>
>>> but double-check if the below can be simplified.
>>>
>>>> ---
>>>>    kernel/locking/lock_events_list.h |  1 +
>>>>    kernel/locking/lockdep.c          | 14 ++++++++++++++
>>>>    2 files changed, 15 insertions(+)
>>>>
>>>> diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
>>>> index 9ef9850aeebe..bed59b2195c7 100644
>>>> --- a/kernel/locking/lock_events_list.h
>>>> +++ b/kernel/locking/lock_events_list.h
>>>> @@ -95,3 +95,4 @@ LOCK_EVENT(rtmutex_deadlock)  /* # of rt_mutex_handle_deadlock()'s    */
>>>>    LOCK_EVENT(lockdep_acquire)
>>>>    LOCK_EVENT(lockdep_lock)
>>>>    LOCK_EVENT(lockdep_nocheck)
>>>> +LOCK_EVENT(lockdep_kasan_fail)
>>>> diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
>>>> index 8436f017c74d..98dd0455d4be 100644
>>>> --- a/kernel/locking/lockdep.c
>>>> +++ b/kernel/locking/lockdep.c
>>>> @@ -57,6 +57,7 @@
>>>>    #include <linux/lockdep.h>
>>>>    #include <linux/context_tracking.h>
>>>>    #include <linux/console.h>
>>>> +#include <linux/kasan.h>
>>>>
>>>>    #include <asm/sections.h>
>>>>
>>>> @@ -5830,6 +5831,19 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
>>>>           if (!debug_locks)
>>>>                   return;
>>>>
>>>> +       /*
>>>> +        * As KASAN instrumentation is disabled and lock_acquire() is usually
>>>> +        * the first lockdep call when a task tries to acquire a lock, add
>>>> +        * kasan_check_byte() here to check for use-after-free of non kernel
>>>> +        * core lockdep_map data to avoid referencing garbage data.
>>>> +        */
>>>> +       if (unlikely(IS_ENABLED(CONFIG_KASAN) &&
>>> This is not needed - kasan_check_byte() will always return true if
>>> KASAN is disabled or not compiled in.
>> I added this check because of the is_kernel_core_data() call.
>>>> +                    !is_kernel_core_data((unsigned long)lock) &&
>>> Why use !is_kernel_core_data()? Is it to improve performance?
>> Not exactly. In my testing, just using kasan_check_byte() doesn't quite
>> work out. It seems to return false positive in some cases causing
>> lockdep splat. I didn't look into exactly why this happens and I added
>> the is_kernel_core_data() call to work around that.
> Globals should have their shadow memory unpoisoned by default, so
> that's definitely odd.
>
> Out of curiosity, do you have such a false positive splat? Wondering
> which data it's accessing. Maybe that'll tell us more about what's
> wrong.

The kasan_check_byte() failure happens very early in the boot cycle. 
There is no KASAN report, but the API returns false. I inserted a 
WARN_ON(1) to dump out the stack.

[    0.000046] ------------[ cut here ]------------
[    0.000047] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:5817 
lock_acquire.part.0+0x22c/0x280
[    0.000057] Modules linked in:
[    0.000062] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 
6.12.0-el10-test+ #15
[    0.000066] Hardware name: HPE ProLiant DL560 Gen10/ProLiant DL560 
Gen10, BIOS U34 01/16/2025
[    0.000068] RIP: 0010:lock_acquire.part.0+0x22c/0x280
[    0.000073] Code: 69 d1 04 85 c0 0f 85 fc fe ff ff 65 48 8b 3d 2b d8 
c1 75 b9 0a 00 00 00 ba 08 00 00 00 4c 89 ee e8 19 e3 ff ff e9 dd fe ff 
ff <0f>
0b 65 48 ff 05 ca 5f c0 75 e9 ce fe ff ff 4c 89 14 24 e8 bc f8
[    0.000076] RSP: 0000:ffffffff8e407c98 EFLAGS: 00010046 ORIG_RAX: 
0000000000000000
[    0.000079] RAX: 0000000000000000 RBX: ffffffff8e54fe70 RCX: 
0000000000000000
[    0.000081] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 
ffffffff8e407c40
[    0.000083] RBP: 0000000000000000 R08: 0000000000000001 R09: 
0000000000000000
[    0.000084] R10: ffffffff8a43af29 R11: 00000000002087cc R12: 
0000000000000001
[    0.000087] R13: 0000000000000000 R14: 0000000000000000 R15: 
0000000000000000
[    0.000088] FS:  0000000000000000(0000) GS:ffffffff8fb88000(0000) 
knlGS:0000000000000000
[    0.000090] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.000093] CR2: ffff888000000413 CR3: 0000001fc96e0000 CR4: 
00000000000000f0
[    0.000095] Call Trace:
[    0.000096]  <TASK>
[    0.000101]  ? show_trace_log_lvl+0x1b0/0x2f0
[    0.000105]  ? show_trace_log_lvl+0x1b0/0x2f0
[    0.000119]  ? lock_acquire.part.0+0x22c/0x280
[    0.000124]  ? __warn.cold+0x5b/0xe5
[    0.000133]  ? lock_acquire.part.0+0x22c/0x280
[    0.000138]  ? report_bug+0x1f0/0x390
[    0.000146]  ? early_fixup_exception+0x145/0x230
[    0.000154]  ? early_idt_handler_common+0x2f/0x3a
[    0.000164]  ? request_resource+0x29/0x2b0
[    0.000172]  ? lock_acquire.part.0+0x22c/0x280
[    0.000177]  ? lock_acquire.part.0+0x3f/0x280
[    0.000182]  ? rcu_is_watching+0x15/0xb0
[    0.000187]  ? __pfx___might_resched+0x10/0x10
[    0.000192]  ? lock_acquire+0x120/0x170
[    0.000195]  ? request_resource+0x29/0x2b0
[    0.000201]  ? rt_write_lock+0x7d/0x110
[    0.000208]  ? request_resource+0x29/0x2b0
[    0.000211]  ? request_resource+0x29/0x2b0
[    0.000217]  ? probe_roms+0x150/0x370
[    0.000222]  ? __pfx_probe_roms+0x10/0x10
[    0.000226]  ? __lock_release.isra.0+0x120/0x2c0
[    0.000231]  ? setup_arch+0x92d/0x1180
[    0.000238]  ? setup_arch+0x95c/0x1180
[    0.000243]  ? __pfx_setup_arch+0x10/0x10
[    0.000246]  ? _printk+0xcc/0x102
[    0.000254]  ? __pfx__printk+0x10/0x10
[    0.000259]  ? cgroup_init_early+0x26a/0x290
[    0.000268]  ? cgroup_init_early+0x26a/0x290
[    0.000271]  ? cgroup_init_early+0x1af/0x290
[    0.000279]  ? start_kernel+0x68/0x3b0
[    0.000285]  ? x86_64_start_reservations+0x24/0x30
[    0.000288]  ? x86_64_start_kernel+0x9c/0xa0
[    0.000292]  ? common_startup_64+0x13e/0x141
[    0.000309]  </TASK>
[    0.000311] irq event stamp: 0
[    0.000312] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[    0.000316] hardirqs last disabled at (0): [<0000000000000000>] 0x0
[    0.000318] softirqs last  enabled at (0): [<0000000000000000>] 0x0
[    0.000320] softirqs last disabled at (0): [<0000000000000000>] 0x0
[    0.000322] ---[ end trace 0000000000000000 ]---
[    0.000331] ------------[ cut here ]------------
[    0.000332] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:5817 
lock_acquire.part.0+0x22c/0x280
[    0.000336] Modules linked in:
[    0.000339] CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G        
W         -------  ---  6.12.0-el10-test+ #15
[    0.000343] Tainted: [W]=WARN
[    0.000345] Hardware name: HPE ProLiant DL560 Gen10/ProLiant DL560 
Gen10, BIOS U34 01/16/2025
[    0.000346] RIP: 0010:lock_acquire.part.0+0x22c/0x280
[    0.000350] Code: 69 d1 04 85 c0 0f 85 fc fe ff ff 65 48 8b 3d 2b d8 
c1 75 b9 0a 00 00 00 ba 08 00 00 00 4c 89 ee e8 19 e3 ff ff e9 dd fe ff 
ff <0f>
0b 65 48 ff 05 ca 5f c0 75 e9 ce fe ff ff 4c 89 14 24 e8 bc f8
[    0.000352] RSP: 0000:ffffffff8e407c20 EFLAGS: 00010046 ORIG_RAX: 
0000000000000000
[    0.000354] RAX: 0000000000000000 RBX: ffffffff8e54fe20 RCX: 
0000000000000000
[    0.000356] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 
ffffffff8e407bc8
[    0.000357] RBP: 0000000000000000 R08: 0000000000000001 R09: 
0000000000000000
[    0.000359] R10: ffffffff8ccf84d2 R11: 00000000002087cc R12: 
0000000000000001
[    0.000360] R13: 0000000000000000 R14: 0000000000000000 R15: 
0000000000000000
[    0.000362] FS:  0000000000000000(0000) GS:ffffffff8fb88000(0000) 
knlGS:0000000000000000
[    0.000364] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.000365] CR2: ffff888000000413 CR3: 0000001fc96e0000 CR4: 
00000000000000f0
[    0.000367] Call Trace:
[    0.000368]  <TASK>
[    0.000369]  ? show_trace_log_lvl+0x1b0/0x2f0
[    0.000373]  ? show_trace_log_lvl+0x1b0/0x2f0
[    0.000386]  ? lock_acquire.part.0+0x22c/0x280
[    0.000391]  ? __warn.cold+0x5b/0xe5
[    0.000396]  ? lock_acquire.part.0+0x22c/0x280
[    0.000400]  ? report_bug+0x1f0/0x390
[    0.000407]  ? early_fixup_exception+0x145/0x230
[    0.000412]  ? early_idt_handler_common+0x2f/0x3a
[    0.000419]  ? rwbase_write_lock.constprop.0.isra.0+0x22/0x5f0
[    0.000427]  ? lock_acquire.part.0+0x22c/0x280
[    0.000434]  ? rcu_is_watching+0x15/0xb0
[    0.000438]  ? lock_acquire+0x120/0x170
[    0.000441]  ? rwbase_write_lock.constprop.0.isra.0+0x22/0x5f0
[    0.000448]  ? _raw_spin_lock_irqsave+0x46/0x90
[    0.000451]  ? rwbase_write_lock.constprop.0.isra.0+0x22/0x5f0
[    0.000456]  ? rwbase_write_lock.constprop.0.isra.0+0x22/0x5f0
[    0.000459]  ? lock_acquire+0x120/0x170
[    0.000462]  ? request_resource+0x29/0x2b0
[    0.000468]  ? rt_write_lock+0x85/0x110
[    0.000471]  ? request_resource+0x29/0x2b0
[    0.000475]  ? request_resource+0x29/0x2b0
[    0.000480]  ? probe_roms+0x150/0x370
[    0.000484]  ? __pfx_probe_roms+0x10/0x10
[    0.000488]  ? __lock_release.isra.0+0x120/0x2c0
[    0.000493]  ? setup_arch+0x92d/0x1180
[    0.000500]  ? setup_arch+0x95c/0x1180
[    0.000505]  ? __pfx_setup_arch+0x10/0x10
[    0.000508]  ? _printk+0xcc/0x102
[    0.000513]  ? __pfx__printk+0x10/0x10
[    0.000517]  ? cgroup_init_early+0x26a/0x290
[    0.000525]  ? cgroup_init_early+0x26a/0x290
[    0.000528]  ? cgroup_init_early+0x1af/0x290
[    0.000535]  ? start_kernel+0x68/0x3b0
[    0.000539]  ? x86_64_start_reservations+0x24/0x30
[    0.000543]  ? x86_64_start_kernel+0x9c/0xa0
[    0.000547]  ? common_startup_64+0x13e/0x141
[    0.000561]  </TASK>
[    0.000562] irq event stamp: 0
[    0.000563] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[    0.000565] hardirqs last disabled at (0): [<0000000000000000>] 0x0
[    0.000567] softirqs last  enabled at (0): [<0000000000000000>] 0x0
[    0.000569] softirqs last disabled at (0): [<0000000000000000>] 0x0
[    0.000571] ---[ end trace 0000000000000000 ]---

Cheers,
Longman

Re: [PATCH v4 4/4] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Marco Elver]

On Fri, 14 Feb 2025 at 17:18, Waiman Long <llong@redhat.com> wrote:
>
> On 2/14/25 9:44 AM, Marco Elver wrote:
> > On Fri, 14 Feb 2025 at 15:09, Waiman Long <llong@redhat.com> wrote:
> >> On 2/14/25 5:44 AM, Marco Elver wrote:
> >>> On Thu, 13 Feb 2025 at 21:02, Waiman Long <longman@redhat.com> wrote:
> >>>> KASAN instrumentation of lockdep has been disabled as we don't need
> >>>> KASAN to check the validity of lockdep internal data structures and
> >>>> incur unnecessary performance overhead. However, the lockdep_map pointer
> >>>> passed in externally may not be valid (e.g. use-after-free) and we run
> >>>> the risk of using garbage data resulting in false lockdep reports. Add
> >>>> kasan_check_byte() call in lock_acquire() for non kernel core data
> >>>> object to catch invalid lockdep_map and abort lockdep processing if
> >>>> input data isn't valid.
> >>>>
> >>>> Suggested-by: Marco Elver <elver@google.com>
> >>>> Signed-off-by: Waiman Long <longman@redhat.com>
> >>> Reviewed-by: Marco Elver <elver@google.com>
> >>>
> >>> but double-check if the below can be simplified.
> >>>
> >>>> ---
> >>>>    kernel/locking/lock_events_list.h |  1 +
> >>>>    kernel/locking/lockdep.c          | 14 ++++++++++++++
> >>>>    2 files changed, 15 insertions(+)
> >>>>
> >>>> diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
> >>>> index 9ef9850aeebe..bed59b2195c7 100644
> >>>> --- a/kernel/locking/lock_events_list.h
> >>>> +++ b/kernel/locking/lock_events_list.h
> >>>> @@ -95,3 +95,4 @@ LOCK_EVENT(rtmutex_deadlock)  /* # of rt_mutex_handle_deadlock()'s    */
> >>>>    LOCK_EVENT(lockdep_acquire)
> >>>>    LOCK_EVENT(lockdep_lock)
> >>>>    LOCK_EVENT(lockdep_nocheck)
> >>>> +LOCK_EVENT(lockdep_kasan_fail)
> >>>> diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
> >>>> index 8436f017c74d..98dd0455d4be 100644
> >>>> --- a/kernel/locking/lockdep.c
> >>>> +++ b/kernel/locking/lockdep.c
> >>>> @@ -57,6 +57,7 @@
> >>>>    #include <linux/lockdep.h>
> >>>>    #include <linux/context_tracking.h>
> >>>>    #include <linux/console.h>
> >>>> +#include <linux/kasan.h>
> >>>>
> >>>>    #include <asm/sections.h>
> >>>>
> >>>> @@ -5830,6 +5831,19 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
> >>>>           if (!debug_locks)
> >>>>                   return;
> >>>>
> >>>> +       /*
> >>>> +        * As KASAN instrumentation is disabled and lock_acquire() is usually
> >>>> +        * the first lockdep call when a task tries to acquire a lock, add
> >>>> +        * kasan_check_byte() here to check for use-after-free of non kernel
> >>>> +        * core lockdep_map data to avoid referencing garbage data.
> >>>> +        */
> >>>> +       if (unlikely(IS_ENABLED(CONFIG_KASAN) &&
> >>> This is not needed - kasan_check_byte() will always return true if
> >>> KASAN is disabled or not compiled in.
> >> I added this check because of the is_kernel_core_data() call.
> >>>> +                    !is_kernel_core_data((unsigned long)lock) &&
> >>> Why use !is_kernel_core_data()? Is it to improve performance?
> >> Not exactly. In my testing, just using kasan_check_byte() doesn't quite
> >> work out. It seems to return false positive in some cases causing
> >> lockdep splat. I didn't look into exactly why this happens and I added
> >> the is_kernel_core_data() call to work around that.
> > Globals should have their shadow memory unpoisoned by default, so
> > that's definitely odd.
> >
> > Out of curiosity, do you have such a false positive splat? Wondering
> > which data it's accessing. Maybe that'll tell us more about what's
> > wrong.
>
> The kasan_check_byte() failure happens very early in the boot cycle.
> There is no KASAN report, but the API returns false. I inserted a
> WARN_ON(1) to dump out the stack.

I see - I suspect this is before ctors had a chance to run, which is
the way globals are registered with KASAN.

I think it'd be fair to just remove the lockdep_kasan_fail event,
given KASAN would produce its own report on a real error anyway.

I.e. just do the kasan_check_byte(), and don't bail even if it returns
false. The KASAN report would appear before everything else (incl. a
bad lockdep report due to possible corrupted memory) and I think
that's all we need to be able to debug a real bug.

Re: [PATCH v4 4/4] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Waiman Long]

On 2/14/25 11:43 AM, Marco Elver wrote:
> On Fri, 14 Feb 2025 at 17:18, Waiman Long <llong@redhat.com> wrote:
>> On 2/14/25 9:44 AM, Marco Elver wrote:
>>> On Fri, 14 Feb 2025 at 15:09, Waiman Long <llong@redhat.com> wrote:
>>>> On 2/14/25 5:44 AM, Marco Elver wrote:
>>>>> On Thu, 13 Feb 2025 at 21:02, Waiman Long <longman@redhat.com> wrote:
>>>>>> KASAN instrumentation of lockdep has been disabled as we don't need
>>>>>> KASAN to check the validity of lockdep internal data structures and
>>>>>> incur unnecessary performance overhead. However, the lockdep_map pointer
>>>>>> passed in externally may not be valid (e.g. use-after-free) and we run
>>>>>> the risk of using garbage data resulting in false lockdep reports. Add
>>>>>> kasan_check_byte() call in lock_acquire() for non kernel core data
>>>>>> object to catch invalid lockdep_map and abort lockdep processing if
>>>>>> input data isn't valid.
>>>>>>
>>>>>> Suggested-by: Marco Elver <elver@google.com>
>>>>>> Signed-off-by: Waiman Long <longman@redhat.com>
>>>>> Reviewed-by: Marco Elver <elver@google.com>
>>>>>
>>>>> but double-check if the below can be simplified.
>>>>>
>>>>>> ---
>>>>>>     kernel/locking/lock_events_list.h |  1 +
>>>>>>     kernel/locking/lockdep.c          | 14 ++++++++++++++
>>>>>>     2 files changed, 15 insertions(+)
>>>>>>
>>>>>> diff --git a/kernel/locking/lock_events_list.h b/kernel/locking/lock_events_list.h
>>>>>> index 9ef9850aeebe..bed59b2195c7 100644
>>>>>> --- a/kernel/locking/lock_events_list.h
>>>>>> +++ b/kernel/locking/lock_events_list.h
>>>>>> @@ -95,3 +95,4 @@ LOCK_EVENT(rtmutex_deadlock)  /* # of rt_mutex_handle_deadlock()'s    */
>>>>>>     LOCK_EVENT(lockdep_acquire)
>>>>>>     LOCK_EVENT(lockdep_lock)
>>>>>>     LOCK_EVENT(lockdep_nocheck)
>>>>>> +LOCK_EVENT(lockdep_kasan_fail)
>>>>>> diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
>>>>>> index 8436f017c74d..98dd0455d4be 100644
>>>>>> --- a/kernel/locking/lockdep.c
>>>>>> +++ b/kernel/locking/lockdep.c
>>>>>> @@ -57,6 +57,7 @@
>>>>>>     #include <linux/lockdep.h>
>>>>>>     #include <linux/context_tracking.h>
>>>>>>     #include <linux/console.h>
>>>>>> +#include <linux/kasan.h>
>>>>>>
>>>>>>     #include <asm/sections.h>
>>>>>>
>>>>>> @@ -5830,6 +5831,19 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
>>>>>>            if (!debug_locks)
>>>>>>                    return;
>>>>>>
>>>>>> +       /*
>>>>>> +        * As KASAN instrumentation is disabled and lock_acquire() is usually
>>>>>> +        * the first lockdep call when a task tries to acquire a lock, add
>>>>>> +        * kasan_check_byte() here to check for use-after-free of non kernel
>>>>>> +        * core lockdep_map data to avoid referencing garbage data.
>>>>>> +        */
>>>>>> +       if (unlikely(IS_ENABLED(CONFIG_KASAN) &&
>>>>> This is not needed - kasan_check_byte() will always return true if
>>>>> KASAN is disabled or not compiled in.
>>>> I added this check because of the is_kernel_core_data() call.
>>>>>> +                    !is_kernel_core_data((unsigned long)lock) &&
>>>>> Why use !is_kernel_core_data()? Is it to improve performance?
>>>> Not exactly. In my testing, just using kasan_check_byte() doesn't quite
>>>> work out. It seems to return false positive in some cases causing
>>>> lockdep splat. I didn't look into exactly why this happens and I added
>>>> the is_kernel_core_data() call to work around that.
>>> Globals should have their shadow memory unpoisoned by default, so
>>> that's definitely odd.
>>>
>>> Out of curiosity, do you have such a false positive splat? Wondering
>>> which data it's accessing. Maybe that'll tell us more about what's
>>> wrong.
>> The kasan_check_byte() failure happens very early in the boot cycle.
>> There is no KASAN report, but the API returns false. I inserted a
>> WARN_ON(1) to dump out the stack.
> I see - I suspect this is before ctors had a chance to run, which is
> the way globals are registered with KASAN.
>
> I think it'd be fair to just remove the lockdep_kasan_fail event,
> given KASAN would produce its own report on a real error anyway.
>
> I.e. just do the kasan_check_byte(), and don't bail even if it returns
> false. The KASAN report would appear before everything else (incl. a
> bad lockdep report due to possible corrupted memory) and I think
> that's all we need to be able to debug a real bug.

Fair, will update the patch.

Cheers,
Longman

>

[PATCH v4.1 4/4] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Waiman Long]

KASAN instrumentation of lockdep has been disabled as we don't need
KASAN to check the validity of lockdep internal data structures and
incur unnecessary performance overhead. However, the lockdep_map pointer
passed in externally may not be valid (e.g. use-after-free) and we run
the risk of using garbage data resulting in false lockdep reports.

Add kasan_check_byte() call in lock_acquire() for non kernel core data
object to catch invalid lockdep_map and print out a KASAN report before
any lockdep splat, if any.

Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Waiman Long <longman@redhat.com>
---
 kernel/locking/lockdep.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 8436f017c74d..b15757e63626 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -57,6 +57,7 @@
 #include <linux/lockdep.h>
 #include <linux/context_tracking.h>
 #include <linux/console.h>
+#include <linux/kasan.h>
 
 #include <asm/sections.h>
 
@@ -5830,6 +5831,14 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 	if (!debug_locks)
 		return;
 
+	/*
+	 * As KASAN instrumentation is disabled and lock_acquire() is usually
+	 * the first lockdep call when a task tries to acquire a lock, add
+	 * kasan_check_byte() here to check for use-after-free and other
+	 * memory errors.
+	 */
+	kasan_check_byte(lock);
+
 	if (unlikely(!lockdep_enabled())) {
 		/* XXX allow trylock from NMI ?!? */
 		if (lockdep_nmi() && !trylock) {
-- 
2.48.1

Re: [PATCH v4.1 4/4] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Marco Elver]

On Fri, 14 Feb 2025 at 20:53, Waiman Long <longman@redhat.com> wrote:
>
> KASAN instrumentation of lockdep has been disabled as we don't need
> KASAN to check the validity of lockdep internal data structures and
> incur unnecessary performance overhead. However, the lockdep_map pointer
> passed in externally may not be valid (e.g. use-after-free) and we run
> the risk of using garbage data resulting in false lockdep reports.
>
> Add kasan_check_byte() call in lock_acquire() for non kernel core data
> object to catch invalid lockdep_map and print out a KASAN report before
> any lockdep splat, if any.
>
> Suggested-by: Marco Elver <elver@google.com>
> Signed-off-by: Waiman Long <longman@redhat.com>

Reviewed-by: Marco Elver <elver@google.com>

> ---
>  kernel/locking/lockdep.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
> index 8436f017c74d..b15757e63626 100644
> --- a/kernel/locking/lockdep.c
> +++ b/kernel/locking/lockdep.c
> @@ -57,6 +57,7 @@
>  #include <linux/lockdep.h>
>  #include <linux/context_tracking.h>
>  #include <linux/console.h>
> +#include <linux/kasan.h>
>
>  #include <asm/sections.h>
>
> @@ -5830,6 +5831,14 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
>         if (!debug_locks)
>                 return;
>
> +       /*
> +        * As KASAN instrumentation is disabled and lock_acquire() is usually
> +        * the first lockdep call when a task tries to acquire a lock, add
> +        * kasan_check_byte() here to check for use-after-free and other
> +        * memory errors.
> +        */
> +       kasan_check_byte(lock);
> +
>         if (unlikely(!lockdep_enabled())) {
>                 /* XXX allow trylock from NMI ?!? */
>                 if (lockdep_nmi() && !trylock) {
> --
> 2.48.1
>
> --
> You received this message because you are subscribed to the Google Groups "kasan-dev" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to kasan-dev+unsubscribe@googlegroups.com.
> To view this discussion visit https://groups.google.com/d/msgid/kasan-dev/20250214195242.2480920-1-longman%40redhat.com.

Re: [PATCH v4.1 4/4] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Andrey Konovalov]

On Fri, Feb 14, 2025 at 8:53 PM Waiman Long <longman@redhat.com> wrote:
>
> KASAN instrumentation of lockdep has been disabled as we don't need
> KASAN to check the validity of lockdep internal data structures and
> incur unnecessary performance overhead. However, the lockdep_map pointer
> passed in externally may not be valid (e.g. use-after-free) and we run
> the risk of using garbage data resulting in false lockdep reports.
>
> Add kasan_check_byte() call in lock_acquire() for non kernel core data
> object to catch invalid lockdep_map and print out a KASAN report before
> any lockdep splat, if any.
>
> Suggested-by: Marco Elver <elver@google.com>
> Signed-off-by: Waiman Long <longman@redhat.com>
> ---
>  kernel/locking/lockdep.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
> index 8436f017c74d..b15757e63626 100644
> --- a/kernel/locking/lockdep.c
> +++ b/kernel/locking/lockdep.c
> @@ -57,6 +57,7 @@
>  #include <linux/lockdep.h>
>  #include <linux/context_tracking.h>
>  #include <linux/console.h>
> +#include <linux/kasan.h>
>
>  #include <asm/sections.h>
>
> @@ -5830,6 +5831,14 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
>         if (!debug_locks)
>                 return;
>
> +       /*
> +        * As KASAN instrumentation is disabled and lock_acquire() is usually
> +        * the first lockdep call when a task tries to acquire a lock, add
> +        * kasan_check_byte() here to check for use-after-free and other
> +        * memory errors.
> +        */
> +       kasan_check_byte(lock);
> +
>         if (unlikely(!lockdep_enabled())) {
>                 /* XXX allow trylock from NMI ?!? */
>                 if (lockdep_nmi() && !trylock) {
> --
> 2.48.1
>

I wonder if kasan_check_read/write() would be a better fit here. Those
are intended for the compiler-based modes and are no-op for HW_TAGS.
But I assume lockdep will access this lock variable anyway, so HW_TAGS
will detect memory errors.

On the other hand, detecting a bug earlier is better, so
kasan_check_byte() seems the better choice. And lockdep is not
intended to be fast / used on production anyway, so the extra
instructions added by kasan_check_byte() for HW_TAGS don't matter.

I guess we can change this later, if there's ever a reason to do so.

Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>

[tip: locking/core] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[tip-bot2 for Waiman Long]

The following commit has been merged into the locking/core branch of tip:

Commit-ID:     8ca5e9186d367807336c5a40a086aef163c18800
Gitweb:        https://git.kernel.org/tip/8ca5e9186d367807336c5a40a086aef163c18800
Author:        Waiman Long <longman@redhat.com>
AuthorDate:    Fri, 14 Feb 2025 14:52:42 -05:00
Committer:     Boqun Feng <boqun.feng@gmail.com>
CommitterDate: Sun, 23 Feb 2025 18:24:46 -08:00

locking/lockdep: Add kasan_check_byte() check in lock_acquire()

KASAN instrumentation of lockdep has been disabled as we don't need
KASAN to check the validity of lockdep internal data structures and
incur unnecessary performance overhead. However, the lockdep_map pointer
passed in externally may not be valid (e.g. use-after-free) and we run
the risk of using garbage data resulting in false lockdep reports.

Add kasan_check_byte() call in lock_acquire() for non kernel core data
object to catch invalid lockdep_map and print out a KASAN report before
any lockdep splat, if any.

Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250214195242.2480920-1-longman@redhat.com
---
 kernel/locking/lockdep.c |  9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 8436f01..b15757e 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -57,6 +57,7 @@
 #include <linux/lockdep.h>
 #include <linux/context_tracking.h>
 #include <linux/console.h>
+#include <linux/kasan.h>
 
 #include <asm/sections.h>
 
@@ -5830,6 +5831,14 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 	if (!debug_locks)
 		return;
 
+	/*
+	 * As KASAN instrumentation is disabled and lock_acquire() is usually
+	 * the first lockdep call when a task tries to acquire a lock, add
+	 * kasan_check_byte() here to check for use-after-free and other
+	 * memory errors.
+	 */
+	kasan_check_byte(lock);
+
 	if (unlikely(!lockdep_enabled())) {
 		/* XXX allow trylock from NMI ?!? */
 		if (lockdep_nmi() && !trylock) {

Re: [PATCH v4 0/4] locking/lockdep: Disable KASAN instrumentation of lockdep.c

[Boqun Feng]

On Thu, Feb 13, 2025 at 03:02:24PM -0500, Waiman Long wrote:
>  v3: 
>   - Add another patch to insert lock events into lockdep.c.
>   - Rerun all the tests with the simpler defconfig kernel build and do
>     further analysis of the of the performance difference between the
>     the RT and non-RT debug kernels.
> 
>  v4:
>   - Update test results in patch 3 after incorporating CONFIG_KASAN_INLINE
>     into the test matrix.
>   - Add patch 4 to call kasan_check_byte() in lock_acquire.
> 
> It is found that disabling KASAN instrumentation when compiling
> lockdep.c can significantly improve the performance of RT debug kernel
> while the performance benefit of non-RT debug kernel is relatively
> modest.
> 
> This series also include patches to add locking events to the rtmutex
> slow paths and the lockdep code for better analysis of the different
> performance behavior between RT and non-RT debug kernels.
> 

Thank you, and thank Marco and Andrey for the reviews. Queued for v6.15.

Regards,
Boqun

> Waiman Long (4):
>   locking/lock_events: Add locking events for rtmutex slow paths
>   locking/lock_events: Add locking events for lockdep
>   locking/lockdep: Disable KASAN instrumentation of lockdep.c
>   locking/lockdep: Add kasan_check_byte() check in lock_acquire()
> 
>  kernel/locking/Makefile           |  3 ++-
>  kernel/locking/lock_events_list.h | 29 +++++++++++++++++++++++++++++
>  kernel/locking/lockdep.c          | 22 +++++++++++++++++++++-
>  kernel/locking/rtmutex.c          | 29 ++++++++++++++++++++++++-----
>  4 files changed, 76 insertions(+), 7 deletions(-)
> 
> -- 
> 2.48.1
> 

[PATCH locking 06/11] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[Boqun Feng]

From: Waiman Long <longman@redhat.com>

KASAN instrumentation of lockdep has been disabled as we don't need
KASAN to check the validity of lockdep internal data structures and
incur unnecessary performance overhead. However, the lockdep_map pointer
passed in externally may not be valid (e.g. use-after-free) and we run
the risk of using garbage data resulting in false lockdep reports.

Add kasan_check_byte() call in lock_acquire() for non kernel core data
object to catch invalid lockdep_map and print out a KASAN report before
any lockdep splat, if any.

Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250214195242.2480920-1-longman@redhat.com
---
 kernel/locking/lockdep.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 8436f017c74d..b15757e63626 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -57,6 +57,7 @@
 #include <linux/lockdep.h>
 #include <linux/context_tracking.h>
 #include <linux/console.h>
+#include <linux/kasan.h>
 
 #include <asm/sections.h>
 
@@ -5830,6 +5831,14 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 	if (!debug_locks)
 		return;
 
+	/*
+	 * As KASAN instrumentation is disabled and lock_acquire() is usually
+	 * the first lockdep call when a task tries to acquire a lock, add
+	 * kasan_check_byte() here to check for use-after-free and other
+	 * memory errors.
+	 */
+	kasan_check_byte(lock);
+
 	if (unlikely(!lockdep_enabled())) {
 		/* XXX allow trylock from NMI ?!? */
 		if (lockdep_nmi() && !trylock) {
-- 
2.47.1

[tip: locking/core] locking/lockdep: Add kasan_check_byte() check in lock_acquire()

[tip-bot2 for Waiman Long]

The following commit has been merged into the locking/core branch of tip:

Commit-ID:     de4b59d652646cf00cf632174348ca2266099edc
Gitweb:        https://git.kernel.org/tip/de4b59d652646cf00cf632174348ca2266099edc
Author:        Waiman Long <longman@redhat.com>
AuthorDate:    Fri, 07 Mar 2025 15:26:56 -08:00
Committer:     Ingo Molnar <mingo@kernel.org>
CommitterDate: Sat, 08 Mar 2025 00:55:04 +01:00

locking/lockdep: Add kasan_check_byte() check in lock_acquire()

KASAN instrumentation of lockdep has been disabled, as we don't need
KASAN to check the validity of lockdep internal data structures and
incur unnecessary performance overhead. However, the lockdep_map pointer
passed in externally may not be valid (e.g. use-after-free) and we run
the risk of using garbage data resulting in false lockdep reports.

Add kasan_check_byte() call in lock_acquire() for non kernel core data
object to catch invalid lockdep_map and print out a KASAN report before
any lockdep splat, if any.

Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20250214195242.2480920-1-longman@redhat.com
Link: https://lore.kernel.org/r/20250307232717.1759087-7-boqun.feng@gmail.com
---
 kernel/locking/lockdep.c |  9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 8436f01..b15757e 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -57,6 +57,7 @@
 #include <linux/lockdep.h>
 #include <linux/context_tracking.h>
 #include <linux/console.h>
+#include <linux/kasan.h>
 
 #include <asm/sections.h>
 
@@ -5830,6 +5831,14 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 	if (!debug_locks)
 		return;
 
+	/*
+	 * As KASAN instrumentation is disabled and lock_acquire() is usually
+	 * the first lockdep call when a task tries to acquire a lock, add
+	 * kasan_check_byte() here to check for use-after-free and other
+	 * memory errors.
+	 */
+	kasan_check_byte(lock);
+
 	if (unlikely(!lockdep_enabled())) {
 		/* XXX allow trylock from NMI ?!? */
 		if (lockdep_nmi() && !trylock) {