* [PATCH V3] arm64: dts: qcom: arduino-imola: fix faulty spidev node
@ 2026-02-13 10:10 Riccardo Mereu
2026-02-13 10:40 ` Konrad Dybcio
2026-03-18 13:50 ` Bjorn Andersson
0 siblings, 2 replies; 3+ messages in thread
From: Riccardo Mereu @ 2026-02-13 10:10 UTC (permalink / raw)
To: lee, robh, krzk+dt, conor+dt, andersson, konradybcio, sboyd
Cc: linux-arm-msm, devicetree, linux-kernel, alexey.klimov,
srinivas.kandagatla, m.facchin, akucheri, ndechesn,
Riccardo Mereu
From: Riccardo Mereu <r.mereu@arduino.cc>
CS pin added on pinctrl0 property is causing spidev to return -ENODEV
since that GPIO is already part of spi5 pinmuxing.
Fixes: 3f745bc0f11f ("arm64: dts: qcom: qrb2210: add dts for Arduino unoq")
Signed-off-by: Riccardo Mereu <r.mereu@arduino.cc>
---
Changes since V2:
- Changed spidev@0 nodename to mcu@0.
- Changed properties order in same node to match DTS coding
style.
arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
index 197ab6eb1666..5ab605cc56c8 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
@@ -325,21 +325,13 @@ &sdhc_1 {
&spi5 {
status = "okay";
- spidev@0 {
- reg = <0>;
+ mcu@0 {
compatible = "arduino,unoq-mcu";
- pinctrl-0 = <&spidev_cs>;
- pinctrl-names = "default";
+ reg = <0>;
};
};
&tlmm {
- spidev_cs: spidev-cs-state {
- pins = "gpio17";
- function = "gpio";
- drive-strength = <16>;
- };
-
jmisc_gpio18: jmisc-gpio18-state {
pins = "gpio18";
function = "gpio";
--
2.53.0
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH V3] arm64: dts: qcom: arduino-imola: fix faulty spidev node
2026-02-13 10:10 [PATCH V3] arm64: dts: qcom: arduino-imola: fix faulty spidev node Riccardo Mereu
@ 2026-02-13 10:40 ` Konrad Dybcio
2026-03-18 13:50 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Konrad Dybcio @ 2026-02-13 10:40 UTC (permalink / raw)
To: Riccardo Mereu, lee, robh, krzk+dt, conor+dt, andersson,
konradybcio, sboyd
Cc: linux-arm-msm, devicetree, linux-kernel, alexey.klimov,
srinivas.kandagatla, m.facchin, akucheri, ndechesn,
Riccardo Mereu
On 2/13/26 11:10 AM, Riccardo Mereu wrote:
> From: Riccardo Mereu <r.mereu@arduino.cc>
>
> CS pin added on pinctrl0 property is causing spidev to return -ENODEV
> since that GPIO is already part of spi5 pinmuxing.
>
> Fixes: 3f745bc0f11f ("arm64: dts: qcom: qrb2210: add dts for Arduino unoq")
> Signed-off-by: Riccardo Mereu <r.mereu@arduino.cc>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Konrad
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH V3] arm64: dts: qcom: arduino-imola: fix faulty spidev node
2026-02-13 10:10 [PATCH V3] arm64: dts: qcom: arduino-imola: fix faulty spidev node Riccardo Mereu
2026-02-13 10:40 ` Konrad Dybcio
@ 2026-03-18 13:50 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2026-03-18 13:50 UTC (permalink / raw)
To: lee, robh, krzk+dt, conor+dt, konradybcio, sboyd, Riccardo Mereu
Cc: linux-arm-msm, devicetree, linux-kernel, alexey.klimov,
srinivas.kandagatla, m.facchin, akucheri, ndechesn,
Riccardo Mereu
On Fri, 13 Feb 2026 11:10:02 +0100, Riccardo Mereu wrote:
> CS pin added on pinctrl0 property is causing spidev to return -ENODEV
> since that GPIO is already part of spi5 pinmuxing.
>
>
Applied, thanks!
[1/1] arm64: dts: qcom: arduino-imola: fix faulty spidev node
commit: 84d8976426072ea1a559ab1aaeff6bdc16248813
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-03-18 13:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-02-13 10:10 [PATCH V3] arm64: dts: qcom: arduino-imola: fix faulty spidev node Riccardo Mereu
2026-02-13 10:40 ` Konrad Dybcio
2026-03-18 13:50 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®