[PATCH v4 1/3] dt-bindings: edac: xlnx,versal-ddrmc: Add xlnx,versal-xilsem compatible

[Rama devi Veggalam <rama.devi.veggalam@amd.com>]

Add the "xlnx,versal-xilsem" compatible string for the Versal
XilSEM (Xilinx Soft Error Mitigation) hardware block.

XilSEM runs as part of the Platform Loader and Manager (PLM) on the
PMC and detects (and optionally corrects) soft errors in Versal
Configuration Memory, notifying error events to user applications.

The new compatible string only needs a single register region and
does not use reg-names or interrupts, so the schema gates these
requirements per compatible string.

Signed-off-by: Rama devi Veggalam <rama.devi.veggalam@amd.com>
---
Changes in v4:
- Added a new "xlnx,versal-xilsem" compatible string to the existing
  xlnx,versal-ddrmc-edac.yaml binding, gated via allOf/if-then so
  DDRMC and XilSEM requirements (reg, reg-names, interrupts) are
  validated independently per compatible string.

Changes in v3:
- Merged XilSEM edac with Versal Edac

Changes in v2:
- Changed "xlnx,versal-xilsem-edac" to constant
- Removed "compatible: in required section
- Removed "|" in description
- Removed "items" in compatible
- Fixed indentation in examples
- Updated title and description
---
 .../memory-controllers/xlnx,versal-ddrmc-edac.yaml | 64 +++++++++++++++++++---
 1 file changed, 57 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-ddrmc-edac.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-ddrmc-edac.yaml
index 12f8e9f..b5dc320 100644
--- a/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-ddrmc-edac.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-ddrmc-edac.yaml
@@ -4,25 +4,35 @@
 $id: http://devicetree.org/schemas/memory-controllers/xlnx,versal-ddrmc-edac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Versal DDRMC (Integrated DDR Memory Controller)
+title: Xilinx Versal DDRMC (Integrated DDR Memory Controller) and XilSEM EDAC
 
 maintainers:
   - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
   - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+  - Rama Devi Veggalam <rama.devi.veggalam@amd.com>
 
 description:
   The integrated DDR Memory Controllers (DDRMCs) support both DDR4 and LPDDR4/
   4X memory interfaces. Versal DDR memory controller has an optional ECC support
   which correct single bit ECC errors and detect double bit ECC errors.
 
+  Xilinx Versal Soft Error Mitigation (XilSEM) is part of the Platform Loader
+  and Manager (PLM) which is loaded into and runs on the Platform Management
+  Controller (PMC). XilSEM is responsible for detecting and optionally
+  correcting soft errors in Configuration Memory of Versal. Whenever an error
+  is detected, be it correctable or uncorrectable, XilSEM notifies the errors
+  to user applications via the firmware's event notification interface,
+  rather than a devicetree-described interrupt.
+
 properties:
   compatible:
-    const: xlnx,versal-ddrmc
+    enum:
+      - xlnx,versal-ddrmc
+      - xlnx,versal-xilsem
 
   reg:
-    items:
-      - description: DDR Memory Controller registers
-      - description: NOC registers corresponding to DDR Memory Controller
+    minItems: 1
+    maxItems: 2
 
   reg-names:
     items:
@@ -35,8 +45,39 @@ properties:
 required:
   - compatible
   - reg
-  - reg-names
-  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: xlnx,versal-ddrmc
+    then:
+      properties:
+        reg:
+          items:
+            - description: DDR Memory Controller registers
+            - description: NOC registers corresponding to DDR Memory Controller
+        reg-names:
+          items:
+            - const: base
+            - const: noc
+      required:
+        - reg-names
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: xlnx,versal-xilsem
+    then:
+      properties:
+        reg:
+          items:
+            - description: XilSEM (Soft Error Mitigation) register region
+        reg-names: false
+        interrupts: false
 
 additionalProperties: false
 
@@ -55,3 +96,12 @@ examples:
         interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
       };
     };
+  - |
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      edac@f2014050 {
+          compatible = "xlnx,versal-xilsem";
+          reg = <0x0 0xf2014050 0x0 0xc4>;
+      };
+    };
-- 
1.9.5