* Mtrr problem on via M10000 with 2.6.0-test3
@ 2003-08-15 11:32 Uberto Barbini
0 siblings, 0 replies; only message in thread
From: Uberto Barbini @ 2003-08-15 11:32 UTC (permalink / raw)
To: linux-kernel
Every time, X (4.3.99.10) reports at starting:
(WW) via(0): "Failed to setup write-combining range(0xe4000000,0x4000000)
The same error appears with vesa driver too.
I enabled mtrr in kernel and tried
less /proc/mtrr
...
reg03: base=0e40000000 (3648MB), size= 8MB: write-combining, count=1
The values seem right.
I also tried to change the ram amount for the video card (8-64) on bios and
it'll report correctly.
The problem is present at least since 2.6.0-test1, and with all X
versions.
Some other informations: I'm using gentoo and loaded via_agp and
agpgart, apart the error X runs nicely at first but after some time it
freeze all (telnet not responding).
Thanks for any hints or help.
Uberto Barbini
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-08-15 11:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-08-15 11:32 Mtrr problem on via M10000 with 2.6.0-test3 Uberto Barbini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®