Re: [PATCH 2/4] dt-bindings: PCI: qcom: Document the Eliza PCIe Controller

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

On 5/22/2026 12:20 PM, Krzysztof Kozlowski wrote:
> On Thu, May 21, 2026 at 07:35:30PM +0530, Krishna Chaitanya Chundru wrote:
>> +description:
>> +  Qualcomm ELIZA SoC (and compatible) PCIe root complex controller is based on
>> +  the Synopsis DesignWare PCIe IP.
>> +
>> +properties:
>> +  compatible:
>> +    const: qcom,pcie-eliza
> All new pcie compatibles moved to correct format.
Ack, I will change it to qcom,elize-pcie
>> +
>> +  reg:
>> +    minItems: 5
>> +    maxItems: 6
>> +
>> +  reg-names:
>> +    minItems: 5
>> +    items:
>> +      - const: parf # Qualcomm specific registers
>> +      - const: dbi # DesignWare PCIe registers
>> +      - const: elbi # External local bus interface registers
>> +      - const: atu # ATU address space
>> +      - const: config # PCIe configuration space
>> +      - const: mhi # MHI registers
>> +
>> +  clocks:
>> +    maxItems: 7
>> +
>> +  clock-names:
>> +    items:
>> +      - const: aux # Auxiliary clock
>> +      - const: cfg # Configuration clock
>> +      - const: bus_master # Master AXI clock
>> +      - const: bus_slave # Slave AXI clock
>> +      - const: slave_q2a # Slave Q2A clock
>> +      - const: ddrss_sf_tbu # PCIe SF TBU clock
>> +      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
>> +
>> +  interrupts:
>> +    minItems: 8
> This should not be flexible. Neither 'reg'.
ack I will remove minItems
>> +    maxItems: 9
>> +
>> +  interrupt-names:
>> +    minItems: 8
>> +    items:
>> +      - const: msi0
>> +      - const: msi1
>> +      - const: msi2
>> +      - const: msi3
>> +      - const: msi4
>> +      - const: msi5
>> +      - const: msi6
>> +      - const: msi7
>> +      - const: global
>> +
>> +  resets:
>> +    maxItems: 2
>> +
>> +  reset-names:
>> +    items:
>> +      - const: pci # PCIe core reset
>> +      - const: link_down # PCIe link down reset
>> +
>> +required:
>> +  - power-domains
>> +  - resets
>> +  - reset-names
>> +
>> +allOf:
>> +  - $ref: qcom,pcie-common.yaml#
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/qcom,eliza-gcc.h>
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    #include <dt-bindings/interconnect/qcom,eliza-rpmh.h>
>> +
>> +    soc {
>> +        #address-cells = <2>;
>> +        #size-cells = <2>;
>> +
>> +        pcie@1c00000 {
>> +            compatible = "qcom,pcie-eliza";
>> +            reg = <0 0x01c00000 0 0x3000>,
>> +                  <0 0x40000000 0 0xf1d>,
>> +                  <0 0x40000f20 0 0xa8>,
>> +                  <0 0x40001000 0 0x1000>,
>> +                  <0 0x40100000 0 0x100000>;
>> +            reg-names = "parf", "dbi", "elbi", "atu", "config";
>> +            ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
>> +                     <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x3d00000>;
>> +
>> +            bus-range = <0x00 0xff>;
>> +            device_type = "pci";
>> +            linux,pci-domain = <0>;
>> +            num-lanes = <1>;
>> +
>> +            #address-cells = <3>;
>> +            #size-cells = <2>;
>> +
>> +            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
>> +                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
>> +                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
>> +                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
>> +                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
>> +                     <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
>> +                     <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
>> +            clock-names = "aux",
>> +                          "cfg",
>> +                          "bus_master",
>> +                          "bus_slave",
>> +                          "slave_q2a",
>> +                          "ddrss_sf_tbu",
>> +                          "cnoc_sf_axi";
>> +
>> +            dma-coherent;
>> +
>> +            interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
>> +                         <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
>> +                         <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
>> +                         <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
>> +                         <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>,
>> +                         <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>,
>> +                         <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>,
>> +                         <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH>,
>> +                         <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
>> +            interrupt-names = "msi0", "msi1", "msi2", "msi3",
>> +                              "msi4", "msi5", "msi6", "msi7", "global";
>> +            #interrupt-cells = <1>;
>> +            interrupt-map-mask = <0 0 0 0x7>;
>> +            interrupt-map = <0 0 0 1 &intc 0 0 0 564 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
>> +                            <0 0 0 2 &intc 0 0 0 565 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
>> +                            <0 0 0 3 &intc 0 0 0 566 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
>> +                            <0 0 0 4 &intc 0 0 0 567 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
>> +
>> +            interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
>> +                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
>> +            interconnect-names = "pcie-mem", "cpu-pcie";
>> +
>> +            iommu-map = <0x0 &apps_smmu 0x1480 0x1>,
>> +                        <0x100 &apps_smmu 0x1481 0x1>;
>> +
>> +            pinctrl-0 = <&pcie0_default_state>;
>> +            pinctrl-names = "default";
>> +
>> +            power-domains = <&gcc GCC_PCIE_0_GDSC>;
>> +
>> +            resets = <&gcc GCC_PCIE_0_BCR>,
>> +                     <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
>> +            reset-names = "pci",
>> +                          "link_down";
>> +
> Drop stray blank line.
ack.

- Krishna Chaitanya.
>> +        };
>> +    };
>>
>> -- 
>> 2.34.1
>>