From: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
To: "Vinod Koul" <vkoul@kernel.org>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Bjorn Andersson" <andersson@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org,
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Subject: [PATCH 2/4] dt-bindings: PCI: qcom: Document the Eliza PCIe Controller
Date: Thu, 21 May 2026 19:35:30 +0530 [thread overview]
Message-ID: <20260521-eliza-v1-2-97cdbe88389d@oss.qualcomm.com> (raw)
In-Reply-To: <20260521-eliza-v1-0-97cdbe88389d@oss.qualcomm.com>
Add a dedicated schema for the PCIe root complex controller found on the
Qualcomm Eliza SoC. The controller is based on the Synopsis DesignWare PCIe
IP and requires a platform-specific set of clocks that differ from existing
Qcom PCIe schemas.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
.../devicetree/bindings/pci/qcom,pcie-eliza.yaml | 165 +++++++++++++++++++++
1 file changed, 165 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-eliza.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-eliza.yaml
new file mode 100644
index 000000000000..826e2adf4fda
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-eliza.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-eliza.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Eliza PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <mani@kernel.org>
+
+description:
+ Qualcomm ELIZA SoC (and compatible) PCIe root complex controller is based on
+ the Synopsis DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,pcie-eliza
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ maxItems: 7
+
+ clock-names:
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+
+ interrupts:
+ minItems: 8
+ maxItems: 9
+
+ interrupt-names:
+ minItems: 8
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+ - const: global
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+ - const: link_down # PCIe link down reset
+
+required:
+ - power-domains
+ - resets
+ - reset-names
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,eliza-gcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,eliza-rpmh.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c00000 {
+ compatible = "qcom,pcie-eliza";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x3d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+ <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "cnoc_sf_axi";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7", "global";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 564 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 0 565 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 0 566 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 0 567 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ iommu-map = <0x0 &apps_smmu 0x1480 0x1>,
+ <0x100 &apps_smmu 0x1481 0x1>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>,
+ <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
+ reset-names = "pci",
+ "link_down";
+
+ };
+ };
--
2.34.1
next prev parent reply other threads:[~2026-05-21 14:05 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-21 14:05 [PATCH 0/4] PCI: qcom: Add support for Eliza Krishna Chaitanya Chundru
2026-05-21 14:05 ` [PATCH 1/4] dt-bindings: phy: sc8280xp-qmp-pcie: Document Eliza PCIe phy Krishna Chaitanya Chundru
2026-05-22 6:46 ` Krzysztof Kozlowski
2026-05-21 14:05 ` Krishna Chaitanya Chundru [this message]
2026-05-22 6:50 ` [PATCH 2/4] dt-bindings: PCI: qcom: Document the Eliza PCIe Controller Krzysztof Kozlowski
2026-05-22 9:17 ` Krishna Chaitanya Chundru
2026-05-21 14:05 ` [PATCH 3/4] PCI: qcom: Add Support for Eliza Krishna Chaitanya Chundru
2026-05-22 6:51 ` Krzysztof Kozlowski
2026-05-22 9:31 ` Krishna Chaitanya Chundru
2026-05-22 9:34 ` Krzysztof Kozlowski
2026-05-22 10:48 ` Manivannan Sadhasivam
2026-05-22 11:03 ` Krzysztof Kozlowski
2026-05-25 6:11 ` Manivannan Sadhasivam
2026-05-25 12:22 ` Krzysztof Kozlowski
2026-05-21 14:05 ` [PATCH 4/4] phy: qcom: qmp-pcie: Add QMP PCIe PHY support " Krishna Chaitanya Chundru
2026-05-25 8:42 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260521-eliza-v1-2-97cdbe88389d@oss.qualcomm.com \
--to=krishna.chundru@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®