[PATCH v5 0/8] iio: light: vcnl4000: add regulator support

[PATCH v5 0/8] iio: light: vcnl4000: add regulator support

[Erikas Bitovtas]

This patch series introduces support for voltage supply, I2C and cathode
regulators. This fixes an issue where if a regulator is shared between
the proximity sensor and some other device, and the other device is
powered off, the proximity sensor would be powered off as well.

One of the commits includes a Reported-by: tag without a Closes: tag -
the report was done outside in a Matrix channel. A link to access the
report requires sign-in, therefore it was left out.

Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
Changes in v5:
- Renamed vddio-supply to vio-supply.
- Added parentheses to function calls in a variable usage commit message.
- Moved the redundant "proximity-near-level" check removal into its own
  patch.
- Link to v4: https://lore.kernel.org/r/20260316-vcnl4000-regulators-v4-0-854fc2eaf54b@gmail.com

Changes in v4:
- Reworded device tree bindings commit into imperative mood and
  clarified where do supplies come from.
- Moved data->chip_spec->set_power_state() calls from init functions to
  probe.
- Removed explicit less than 0 checks for ret where unnecessary.
- Moved the patch that adds regulators to the end of the series.
- Added an explanation for removing duplicate prints in probe.
- Fixed indentation for devm_regulator_bulk_get_enable() and i2c_smbus
  writes in vcnl4200_init().
- Removed a redundant check for "proximity-near-level" device property.
- Link to v3: https://lore.kernel.org/r/20260314-vcnl4000-regulators-v3-0-3c4a48d30676@gmail.com

Changes in v3:
- Added a more detailed description for supplies in the dt-bindings commit.
- Separated sorting includes into a commit of its own.
- Replaced all occurrences of mutex_init with its device-managed
  counterpart.
- Moved client->dev variable declaration into a commit for adding
  regulators.
- Removed redundant dev_err messages in probe function.
- Replaced all direct usages of client->dev and data->client into usages
  by variable.
- Link to v2: https://lore.kernel.org/r/20260312-vcnl4000-regulators-v2-0-2bdebbcbb58a@gmail.com

Changes in v2:
- Removed double quotes in includes.
- Reordered includes alphabetically.
- Enabled regulators before the mutex is initialized.
- Replaced direct usage of &client->dev with a variable.
- Link to v1: https://lore.kernel.org/r/20260311-vcnl4000-regulators-v1-0-66b6038ce563@gmail.com

---
Erikas Bitovtas (8):
      dt-bindings: iio: light: vcnl4000: add regulators
      iio: light: vcnl4000: sort includes by their name
      iio: light: vcnl4000: move power enablement from init to probe
      iio: light: vcnl4000: replace mutex_init with devm_mutex_init
      iio: light: vcnl4000: remove error messages for trigger and irq
      iio: light: vcnl4000: use variables for I2C client and device instances
      iio: light: vcnl4000: remove redundant check for proximity-near-level
      iio: light: vcnl4000: add support for regulators

 .../bindings/iio/light/vishay,vcnl4000.yaml        |  7 ++
 drivers/iio/light/vcnl4000.c                       | 90 ++++++++++++----------
 2 files changed, 56 insertions(+), 41 deletions(-)
---
base-commit: 8e42d2514a7e8eb8d740d0ba82339dd6c0b6463f
change-id: 20260310-vcnl4000-regulators-bcf1b8a01ce6

Best regards,
-- 
Erikas Bitovtas <xerikasxx@gmail.com>

[PATCH v5 1/8] dt-bindings: iio: light: vcnl4000: add regulators

[Erikas Bitovtas]

These sensors can accept 2 supplies - one for the sensor and one for IR
LED [1]. Add supply properties for the sensor - 2 for the sensors and
one external, for their open drain interrupt line, to ensure the sensor
is powered on before proceeding with setup.

[1] https://www.vishay.com/docs/84274/vcnl4040.pdf

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
 Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
index 2ba4d5de4ec4..44882a90bc76 100644
--- a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
+++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
@@ -33,6 +33,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  vdd-supply: true
+  vio-supply: true
+  vled-supply: true
+
   reg:
     maxItems: 1
 
@@ -54,6 +58,9 @@ examples:
             compatible = "vishay,vcnl4200";
             reg = <0x51>;
             proximity-near-level = <220>;
+            vdd-supply = <&reg_vdd>;
+            vddio-supply = <&reg_vddio>;
+            vled-supply = <&reg_vled>;
         };
     };
 ...

-- 
2.53.0

[PATCH v5 2/8] iio: light: vcnl4000: sort includes by their name

[Erikas Bitovtas]

Sort include headers by file name for better readability.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
 drivers/iio/light/vcnl4000.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 5e03c3d8874b..939ff2d65105 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -18,12 +18,12 @@
  */
 
 #include <linux/bitfield.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/err.h>
 #include <linux/delay.h>
-#include <linux/pm_runtime.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
 #include <linux/units.h>
 
 #include <linux/iio/buffer.h>

-- 
2.53.0

[PATCH v5 3/8] iio: light: vcnl4000: move power enablement from init to probe

[Erikas Bitovtas]

Given both vcnl4000_init and vcnl4200_init end with
dev->chip_spec->set_power_state(), they can be called once from the
probe to enable the sensors. Move the set_power_state function from init
and call it after init function in probe.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
 drivers/iio/light/vcnl4000.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 939ff2d65105..287ccd89cfb2 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -280,7 +280,7 @@ static int vcnl4000_init(struct vcnl4000_data *data)
 	data->rev = ret & 0xf;
 	data->al_scale = 250000;
 
-	return data->chip_spec->set_power_state(data, true);
+	return 0;
 };
 
 static ssize_t vcnl4000_write_als_enable(struct vcnl4000_data *data, bool en)
@@ -425,10 +425,6 @@ static int vcnl4200_init(struct vcnl4000_data *data)
 	if (ret < 0)
 		return ret;
 
-	ret = data->chip_spec->set_power_state(data, true);
-	if (ret < 0)
-		return ret;
-
 	return 0;
 };
 
@@ -2003,6 +1999,10 @@ static int vcnl4000_probe(struct i2c_client *client)
 	if (ret < 0)
 		return ret;
 
+	ret = data->chip_spec->set_power_state(data, true);
+	if (ret)
+		return ret;
+
 	dev_dbg(&client->dev, "%s Ambient light/proximity sensor, Rev: %02x\n",
 		data->chip_spec->prod, data->rev);
 

-- 
2.53.0

[PATCH v5 4/8] iio: light: vcnl4000: replace mutex_init with devm_mutex_init

[Erikas Bitovtas]

Replace mutex_init used across driver with its device-managed
counterpart, so all assigned mutexes get destroyed.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
 drivers/iio/light/vcnl4000.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 287ccd89cfb2..cd7e6ee42cc5 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -356,6 +356,8 @@ static int vcnl4200_set_power_state(struct vcnl4000_data *data, bool on)
 
 static int vcnl4200_init(struct vcnl4000_data *data)
 {
+	struct i2c_client *client = data->client;
+	struct device *dev = &client->dev;
 	int ret, id;
 	u16 regval;
 
@@ -400,8 +402,14 @@ static int vcnl4200_init(struct vcnl4000_data *data)
 	}
 	data->al_scale = data->chip_spec->ulux_step;
 	data->ps_scale = 16;
-	mutex_init(&data->vcnl4200_al.lock);
-	mutex_init(&data->vcnl4200_ps.lock);
+
+	ret = devm_mutex_init(dev, &data->vcnl4200_al.lock);
+	if (ret)
+		return ret;
+
+	ret = devm_mutex_init(dev, &data->vcnl4200_ps.lock);
+	if (ret)
+		return ret;
 
 	/* Use 16 bits proximity sensor readings */
 	ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF1);
@@ -1979,6 +1987,7 @@ static int vcnl4010_probe_trigger(struct iio_dev *indio_dev)
 static int vcnl4000_probe(struct i2c_client *client)
 {
 	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct device *dev = &client->dev;
 	struct vcnl4000_data *data;
 	struct iio_dev *indio_dev;
 	int ret;
@@ -1993,7 +2002,9 @@ static int vcnl4000_probe(struct i2c_client *client)
 	data->id = id->driver_data;
 	data->chip_spec = &vcnl4000_chip_spec_cfg[data->id];
 
-	mutex_init(&data->vcnl4000_lock);
+	ret = devm_mutex_init(dev, &data->vcnl4000_lock);
+	if (ret)
+		return ret;
 
 	ret = data->chip_spec->init(data);
 	if (ret < 0)

-- 
2.53.0

[PATCH v5 5/8] iio: light: vcnl4000: remove error messages for trigger and irq

[Erikas Bitovtas]

The error code is available in the log after return. In our case,
attaching a triggered buffer can only fail if we are out of memory, as
no other buffer is being attached. Remove duplicate error messages to
reduce noise in dmesg.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
 drivers/iio/light/vcnl4000.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index cd7e6ee42cc5..76aee16d479b 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -2033,11 +2033,8 @@ static int vcnl4000_probe(struct i2c_client *client)
 						      NULL,
 						      data->chip_spec->trig_buffer_func,
 						      data->chip_spec->buffer_setup_ops);
-		if (ret < 0) {
-			dev_err(&client->dev,
-				"unable to setup iio triggered buffer\n");
+		if (ret < 0)
 			return ret;
-		}
 	}
 
 	if (client->irq && data->chip_spec->irq_thread) {
@@ -2047,10 +2044,8 @@ static int vcnl4000_probe(struct i2c_client *client)
 						IRQF_ONESHOT,
 						"vcnl4000_irq",
 						indio_dev);
-		if (ret < 0) {
-			dev_err(&client->dev, "irq request failed\n");
+		if (ret < 0)
 			return ret;
-		}
 
 		ret = vcnl4010_probe_trigger(indio_dev);
 		if (ret < 0)

-- 
2.53.0

[PATCH v5 6/8] iio: light: vcnl4000: use variables for I2C client and device instances

[Erikas Bitovtas]

After moving data->client and client->dev into variables of their own,
replace all instances of data->client and client->dev being used in
vcnl4200_init() and vcnl4000_probe() by the said variables to reduce
clutter.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
 drivers/iio/light/vcnl4000.c | 35 ++++++++++++++++-------------------
 1 file changed, 16 insertions(+), 19 deletions(-)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 76aee16d479b..34b52725aff6 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -361,14 +361,14 @@ static int vcnl4200_init(struct vcnl4000_data *data)
 	int ret, id;
 	u16 regval;
 
-	ret = i2c_smbus_read_word_data(data->client, VCNL4200_DEV_ID);
+	ret = i2c_smbus_read_word_data(client, VCNL4200_DEV_ID);
 	if (ret < 0)
 		return ret;
 
 	id = ret & 0xff;
 
 	if (id != VCNL4200_PROD_ID) {
-		ret = i2c_smbus_read_word_data(data->client, VCNL4040_DEV_ID);
+		ret = i2c_smbus_read_word_data(client, VCNL4040_DEV_ID);
 		if (ret < 0)
 			return ret;
 
@@ -378,7 +378,7 @@ static int vcnl4200_init(struct vcnl4000_data *data)
 			return -ENODEV;
 	}
 
-	dev_dbg(&data->client->dev, "device id 0x%x", id);
+	dev_dbg(dev, "device id 0x%x", id);
 
 	data->rev = (ret >> 8) & 0xf;
 	data->ps_int = 0;
@@ -412,24 +412,22 @@ static int vcnl4200_init(struct vcnl4000_data *data)
 		return ret;
 
 	/* Use 16 bits proximity sensor readings */
-	ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF1);
+	ret = i2c_smbus_read_word_data(client, VCNL4200_PS_CONF1);
 	if (ret < 0)
 		return ret;
 
 	regval = ret | VCNL4040_PS_CONF2_PS_HD;
-	ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF1,
-					regval);
+	ret = i2c_smbus_write_word_data(client, VCNL4200_PS_CONF1, regval);
 	if (ret < 0)
 		return ret;
 
 	/* Align proximity sensor sample rate to 16 bits data width */
-	ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF3);
+	ret = i2c_smbus_read_word_data(client, VCNL4200_PS_CONF3);
 	if (ret < 0)
 		return ret;
 
 	regval = ret | VCNL4040_CONF3_PS_SAMPLE_16BITS;
-	ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF3,
-					regval);
+	ret = i2c_smbus_write_word_data(client, VCNL4200_PS_CONF3, regval);
 	if (ret < 0)
 		return ret;
 
@@ -1992,7 +1990,7 @@ static int vcnl4000_probe(struct i2c_client *client)
 	struct iio_dev *indio_dev;
 	int ret;
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 
@@ -2014,7 +2012,7 @@ static int vcnl4000_probe(struct i2c_client *client)
 	if (ret)
 		return ret;
 
-	dev_dbg(&client->dev, "%s Ambient light/proximity sensor, Rev: %02x\n",
+	dev_dbg(dev, "%s Ambient light/proximity sensor, Rev: %02x\n",
 		data->chip_spec->prod, data->rev);
 
 	if (device_property_read_u32(&client->dev, "proximity-near-level",
@@ -2029,8 +2027,7 @@ static int vcnl4000_probe(struct i2c_client *client)
 
 	if (data->chip_spec->trig_buffer_func &&
 	    data->chip_spec->buffer_setup_ops) {
-		ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
-						      NULL,
+		ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
 						      data->chip_spec->trig_buffer_func,
 						      data->chip_spec->buffer_setup_ops);
 		if (ret < 0)
@@ -2038,8 +2035,8 @@ static int vcnl4000_probe(struct i2c_client *client)
 	}
 
 	if (client->irq && data->chip_spec->irq_thread) {
-		ret = devm_request_threaded_irq(&client->dev, client->irq,
-						NULL, data->chip_spec->irq_thread,
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						data->chip_spec->irq_thread,
 						IRQF_TRIGGER_FALLING |
 						IRQF_ONESHOT,
 						"vcnl4000_irq",
@@ -2052,7 +2049,7 @@ static int vcnl4000_probe(struct i2c_client *client)
 			return ret;
 	}
 
-	ret = pm_runtime_set_active(&client->dev);
+	ret = pm_runtime_set_active(dev);
 	if (ret < 0)
 		goto fail_poweroff;
 
@@ -2060,9 +2057,9 @@ static int vcnl4000_probe(struct i2c_client *client)
 	if (ret < 0)
 		goto fail_poweroff;
 
-	pm_runtime_enable(&client->dev);
-	pm_runtime_set_autosuspend_delay(&client->dev, VCNL4000_SLEEP_DELAY_MS);
-	pm_runtime_use_autosuspend(&client->dev);
+	pm_runtime_enable(dev);
+	pm_runtime_set_autosuspend_delay(dev, VCNL4000_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(dev);
 
 	return 0;
 fail_poweroff:

-- 
2.53.0

[PATCH v5 7/8] iio: light: vcnl4000: remove redundant check for proximity-near-level

[Erikas Bitovtas]

The data->near_level variable is already assigned 0 during
devm_kzalloc(), therefore checking if the property is present and then
assigning it 0 is redundant. Remove the check for device tree property
and let it fail silently if it is missing or invalid.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
 drivers/iio/light/vcnl4000.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 34b52725aff6..0a4d82679cfe 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -2015,9 +2015,7 @@ static int vcnl4000_probe(struct i2c_client *client)
 	dev_dbg(dev, "%s Ambient light/proximity sensor, Rev: %02x\n",
 		data->chip_spec->prod, data->rev);
 
-	if (device_property_read_u32(&client->dev, "proximity-near-level",
-				     &data->near_level))
-		data->near_level = 0;
+	device_property_read_u32(dev, "proximity-near-level", &data->near_level);
 
 	indio_dev->info = data->chip_spec->info;
 	indio_dev->channels = data->chip_spec->channels;

-- 
2.53.0

[PATCH v5 8/8] iio: light: vcnl4000: add support for regulators

[Erikas Bitovtas]

Add supply, I2C and cathode voltage regulators to the sensor and enable
them. This keeps the sensor powered on even after its only supply shared
by another device shuts down.

Reported-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
 drivers/iio/light/vcnl4000.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 0a4d82679cfe..9650dbc41f2b 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
 #include <linux/units.h>
 
 #include <linux/iio/buffer.h>
@@ -1985,6 +1986,7 @@ static int vcnl4010_probe_trigger(struct iio_dev *indio_dev)
 static int vcnl4000_probe(struct i2c_client *client)
 {
 	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	const char * const regulator_names[] = { "vdd", "vio", "vled" };
 	struct device *dev = &client->dev;
 	struct vcnl4000_data *data;
 	struct iio_dev *indio_dev;
@@ -2000,6 +2002,11 @@ static int vcnl4000_probe(struct i2c_client *client)
 	data->id = id->driver_data;
 	data->chip_spec = &vcnl4000_chip_spec_cfg[data->id];
 
+	ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulator_names),
+					     regulator_names);
+	if (ret)
+		return ret;
+
 	ret = devm_mutex_init(dev, &data->vcnl4000_lock);
 	if (ret)
 		return ret;

-- 
2.53.0

Re: [PATCH v5 1/8] dt-bindings: iio: light: vcnl4000: add regulators

[Krzysztof Kozlowski]

On 19/03/2026 12:58, Erikas Bitovtas wrote:
> These sensors can accept 2 supplies - one for the sensor and one for IR
> LED [1]. Add supply properties for the sensor - 2 for the sensors and
> one external, for their open drain interrupt line, to ensure the sensor
> is powered on before proceeding with setup.
> 
> [1] https://www.vishay.com/docs/84274/vcnl4040.pdf
> 
> Reviewed-by: David Lechner <dlechner@baylibre.com>
> Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
> ---
>  Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
> index 2ba4d5de4ec4..44882a90bc76 100644
> --- a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
> @@ -33,6 +33,10 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  vdd-supply: true
> +  vio-supply: true

That's still a property of I2C bus controller, but if you disagree then
I expect following Rob's comment.
https://lore.kernel.org/all/20230321220825.GA1685482-robh@kernel.org/

Best regards,
Krzysztof

Re: [PATCH v5 1/8] dt-bindings: iio: light: vcnl4000: add regulators

[Rob Herring (Arm)]

On Thu, 19 Mar 2026 13:58:39 +0200, Erikas Bitovtas wrote:
> These sensors can accept 2 supplies - one for the sensor and one for IR
> LED [1]. Add supply properties for the sensor - 2 for the sensors and
> one external, for their open drain interrupt line, to ensure the sensor
> is powered on before proceeding with setup.
> 
> [1] https://www.vishay.com/docs/84274/vcnl4040.pdf
> 
> Reviewed-by: David Lechner <dlechner@baylibre.com>
> Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
> ---
>  Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.example.dtb: light-sensor@51 (vishay,vcnl4200): 'vddio-supply' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/light/vishay,vcnl4000.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260319-vcnl4000-regulators-v5-1-a025d3332805@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.